Large igneous provinces generated from the margins of the large low-velocity provinces in the deep mantle     

Trond H. Torsvik  Mark A. Smethurst  Kevin Burke  Bernhard Steinberger 《Geophysical Journal International》2006,167(3):1447-1460

  相似文献   

Cellular automata as analysis and synthesis engines at the geomorphology–ecology interface     

Mark A. Fonstad   《Geomorphology》2006,77(3-4):217

The linkages between ecology and geomorphology can be difficult to identify because of physical complexity and the limitations of the current theoretical representations in these two fields of study. Deep divisions between these disciplines are manifest in the methods used to simulate process, such as rigidly physical-deterministic methods for many aspects of geomorphology compared with purely stochastic simulations in many models of change in landcover. Practical and theoretical research into ecology–geomorphology linkages cannot wait for a single simulation schema which may never come; as a result, studies of these linkages often appear disjointed and inconsistent.The grid-based simulation framework for cellular automata (CA) allows simultaneous use of competing schemas. CA use in general geographic studies has been primarily limited to urban simulations models of change for land cover, both highly stochastic and/or expert rule-based. In the last decade, however, methods for describing physically deterministic systems in the CA framework have become much more accurate. The possibility now exists to merge separate CA simulations of different environmental systems into unified “multiautomata” models. Because CAs allow transition rules that are deterministic, probabilistic, or expert rule-based, they can immediately incorporate the existing knowledge rules in ecology and geomorphology. The explicitly spatial nature of CA provides a map-like framework that should allow a simple and deeply rooted connection with the mapping traditions of the geosciences and ecological sciences.  相似文献   

Defending national linguistic territories in the European Single Market: towards more transnational geolinguistic analysis     

Mark Wise 《Area》2006,38(2):204-212

This paper calls for more analysis of contemporary transnational linguistic movements. Geographers have hitherto focused on linguistic problems within states and paid less attention to issues that arise as languages, notably English, are used internationally across state boundaries. It does this by examining a conflict that arose when forces integrating the supranational European Single Market space came into conflict with a Member State's determination to protect the linguistic 'integrity' of its national territory. This conflict would appear to be a precursor of similar ones to come as languages increasingly compete in a linguistic market within an integrating Europe and a globalizing world.  相似文献   

Biological and Geochemical Record of Anthropogenic Impacts in Recent Sediments from Lake Pupuke, Auckland City, New Zealand     

Paul Augustinus  Michael Reid  Sofia Andersson  Yanbin Deng  Mark Horrocks 《Journal of Paleolimnology》2006,35(4):789-805

Frozen sediment cores from Lake Pupuke in Auckland City, New Zealand, contain a high resolution decadal to annual scale record of changing lake paleoenvironments and geochemistry that reflects changing landuse and hydrology in the catchment over the past c. 190 years. A reliable chronology is available from AMS ¹⁴C and ²¹⁰Pb dating of the sediments, with the timing of the older part of the record supported by the first appearance of pollen of introduced Pinus and Plantago lanceolata associated with European settlement of Auckland in the early 1840s. Diatom stratigraphy, sediment elemental and carbon isotope geochemistry reflect changes in sediment sources and lake conditions commensurate with European development of the Lake Pupuke catchment, in particular enhanced algal productivity controlled by the influx of nutrients after c. 1920 AD. Attempts to prevent nuisance algal blooms in 1933, 1934 and 1939 using CuSO₄ addition produced Cu spikes in the sediment that allowed confirmation of the accuracy of the ²¹⁰Pb chronology. Hence, the elemental and isotopic composition of the Lake Pupuke sediments reflect the timing of significant anthropogenic activities, rather than climatic variations, that have occurred within the watershed over the past c. 190 years. The comparison of records of land use change in the catchment with the multi-proxy record of changes in the sediments usually allowed unambiguous identification of the signatures of change and their causes.  相似文献   

Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia     

Geordie Mark  Nicholas H. S. Oliver  Patrick J. Williams 《Mineralium Deposita》2006,40(8):769-801

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.  相似文献   

Laboratory Studies Of Wind Stress Over Surface Waves   总被引：4，自引：0，他引：4  

B. Mete Uz  Mark A. Donelan  Tetsu Hara  Erik J. Bock 《Boundary-Layer Meteorology》2002,102(2):301-331

Simultaneous laboratory observations of wind speed, wind stress, and surfacewind-wave spectra are made under a variety of wind forcing patterns using cleanwater as well as water containing an artificial surfactant. Under typical experimentalconditions, more than half of the total stress is supported by the wave-induced stressrather than by the surface viscous stress. When the surfactant reduces the shortwind-wave spectra, the wind stress also decreases by as much as 20–30% at agiven wind speed. When the wind forcing is modulated in time, the wind stresstends to be higher under decreasing wind than under increasing wind at a givenwind speed, mainly because the response of short wind-wave spectra to varyingwind forcing is delayed in time. These examples clearly demonstrate that therelationship between the wind speed and the wind stress can be significantlymodified if the surface wave field is not in equilibrium with the wind forcing.Next, we examine whether the wind stress is estimated accurately if the wave-inducedstress by all surface wave components is explicitly evaluated by linear superpositionand is added to the surface viscous stress. It is assumed that the surface viscous stressis uniquely related to the wind speed, and that the wind input rate is determined by thelocal, reduced turbulent stress rather than the total stress. Our wind stress estimatesincluding the wave contributions agree well with observed wind stress values, evenif the surface wave field is away from its equilibrium with the wind in the presenceof surface films and/or under time-transient wind forcing. These observations stronglysuggest that the wind stress is accurately evaluated as a sum of the wave-induced stressand the surface viscous stress. At very high winds, our stress estimates tend to be lowerthan the observations. We suspect that this is because of the enhancement of wind stressover very steep (or breaking) short wind-waves.  相似文献   

Rates of Deglaciation during the Last Glaciation and Holocene in the Cordillera Vilcanota-Quelccaya Ice Cap Region, Southeastern Perú     

Bryan G. Mark  Geoffrey O. Seltzer  Donald T. Rodbell  Adam Y. Goodman 《Quaternary Research》2002,57(3):287

Moraine chronology is combined with digital topography to model deglacial rates of paleoglacier volumes in both the Huancané Valley on the west side of the Quelccaya Ice Cap and the Upismayo Valley on the northwest side of the Cordillera Vilcanota. The fastest rates of deglaciation (39×10⁻⁵ to 114×10⁻⁵ km³ yr⁻¹ and 112×10⁻⁵ to 247×10⁻⁵ km³ yr⁻¹ for each valley, respectively) were calculated for the most recent paleoglaciers, corresponding to the last few centuries. These results are consistent with observations in the Venezuelan Andes showing high rates of deglaciation since the Little Ice Age. These rates also fall within the range of 20th century rates of deglaciation measured on the Quelccaya Ice Cap (29×10⁻⁵ to 220×10⁻⁵ km³ yr⁻¹, Brecher and Thompson, 1993; Thompson, 2000). These results imply that rates of deglaciation may fluctuate significantly over time and that high rates of deglaciation may not be exclusive to the late 20th century. Equilibrium line altitude (ELA) depressions for the ice volumes of the last glaciation modeled here were computed as 230 m for the Quelccaya Ice Cap and 170 m for the Cordillera Vilcanota. Maximum ELA depressions are lower than previously published: <500 m for the Cordillera Vilcanota and <400 m for the Quelccaya Ice Cap. These lower values could imply a topographic control over paleoglacier extent.  相似文献   

Variation in element release rate from different mineral size fractions from the B horizon of a granitic podzol     

Mark E. Hodson 《Chemical Geology》2002,190(1-4):91-112

Far-from-equilibrium batch dissolution experiments were carried out on the 2000–500, 500–250, 250–53 and 53–2 μm size fractions of the mineral component of the B horizon of a granitic iron humus podzol after removal of organic matter and secondary precipitates. The different size fractions were mineralogically and chemically similar, the main minerals present being quartz, alkali and plagioclase feldspar, biotite and chlorite. Specific surface area increased with decreasing grain size. The measured element release rates decreased in the order 53–2>>>2000–500>500–250>250–53 μm. Surface area normalised element release rates from the 2000–500, 500–250 and 250–53 μm size fractions (0.6–77×10⁻¹⁴ mol/m²/s) were intermediate between literature reported surface area normalised dissolution rates for monomineralic powders of feldspar (0.1–0.01×10⁻¹⁴ mol/m²/s) and sheet silicates (100×10⁻¹⁴ mol/m²/s) dissolving under similar conditions. Element release rates from the 53–2 μm fraction (400–3000×10⁻¹⁴ mol/m²/s) were a factor of 4–30 larger than literature reported values for sheet silicates. The large element release rate of the 53–2 μm fraction means that, despite the small mass fraction of 53–2 μm sized particles present in the soil, dissolution of this fraction is the most important for element release into the soil. A theoretical model predicted similar (within a factor of <2) bulk element release rates for all the mineral powders if observed thicknesses of sheet silicate grains were used as input parameters. Decreasing element release rates with decreasing grain size were only predicted if the thickness of sheet silicates in the powders was held constant. A significantly larger release rate for the 53–2 μm fraction relative to the other size fractions was only predicted if either surface roughness was set several orders of magnitude higher for sheet silicates and several orders of magnitude lower for quartz and feldspars in the 53–2 μm fraction compared to the other size fractions or if the sheet silicate thickness input in the 53–2 μm fraction was set unrealistically low. It is therefore hypothesised that the reason for the unpredicted large release rate from the 52–3 μm size fraction is due to one or more of the following reasons: (1) the greater reactivity of the smaller particles due to surface free energy effects, (2) the lack of proportionality between the BET surface area used to normalise the release rates and the actual reactive surface area of the grains and, (3) the presence of traces quantities of reactive minerals which were undetected in the 53–2 μm fraction but were entirely absent in the coarser fractions.  相似文献   

ENSO impacts on salinity in Tampa Bay, Florida     

Nancy Schmidt  Mark E. Luther 《Estuaries and Coasts》2002,25(5):976-984

Estuarine salinity distributions reflect a dynamic balance between the processes that control estuarine circulation. At seasonal and longer time scales, freshwater inputs into estuaries represent the primary control on salinity distribution and estuarine circulation. El Niño-Southern Oscillation (ENSO) conditions influence seasonal rainfall and stream discharge patterns in the Tampa Bay, Florida region. The resulting variability in freshwater input to Tampa Bay influences its seasonal salinity distribution. During El Niño events, ENSO sea surface temperature anomalies (SSTAs) are significantly and inversely correlated with salinity in the bay during winter and spring. These patterns reflect the elevated rainfall over the drainage basin and the resulting elevated stream discharge and runoff, which depress salinity levels. Spatially, the correlations are strongest at the head of the bay, especially in bay sections with long residence times. During La Niña conditions, significant inverse correlations between ENSO SSTAs and salinity occur during spring. Dry conditions and depressed stream discharge characterize La Niña winters and springs, and the higher salinity levels during La Niña springs reflect the lower freshwater input levels.  相似文献   

Problems with argon: K-Ar ages in Gulf Coast shales     

Mark Wilkinson 《Chemical Geology》2002,191(4):277-283

K-Ar ages of Gulf Coast shales do not correspond to diagenetic ‘events’, but are a combination of inherited detrital ages and authigenic overprints. The key to understanding K-Ar ages of shales is the fate of the ⁴⁰Ar when the host minerals dissolve or react during the illitisation reaction: is ⁴⁰Ar incorporated within the illite, or is it lost to the porewaters? Ages are modelled as due to a single illitisation reaction, assuming a uniform precursor sediment and open-system import of K. Both whole-rock and clay mineral fraction data can be reproduced by modelling. The ⁴⁰Ar incorporated into illite is a surprisingly high proportion (75-100%) of that produced within detrital phases (smectite, K-feldspar, mica), perhaps implying that the illitisation reaction is a solid-state transformation, or that ⁴⁰Ar is imported into the shales along with incoming K. The model does not provide a good fit to the data below 4000 m, when the illitisation reaction is apparently complete, but shales lose ⁴⁰Ar by solid-state diffusion or recrystallisation.  相似文献