Seismic imaging of the shallow subsurface: shear-wave case histories     

Dasios  McCann  Astin  McCann  & Fenning 《Geophysical Prospecting》1999,47(4):565-591

Obtaining high-resolution images of the geology and hydrogeology of the subsurface in the depth range from ground level to 50 m is one of the major challenges of modern geophysics. The methods which are commonly used (such as compressional-wave surveys and ground-penetrating radar) often suffer from adverse effects caused by the near-surface conditions, changes in water saturation and various sources of noise. This paper demonstrates some of the advantages offered by the use of shear-wave seismology and by the combination of shear- and compressional-wave seismic methods in shallow subsurface investigations.
Multicomponent shallow seismic tests were carried out at four different sites to examine the effectiveness of different acquisition geometries under a variety of near-surface geological conditions. Near-surface conditions encountered at the sites included thick clays, clay/sand sequences overlying Chalk, mudstone overlying granodiorite bedrock and landfill material.
Under all conditions, shear-wave data acquisition was found to have advantages over compressional-wave acquisition for the investigation of the shallow subsurface. Shear head waves, being unaffected by water saturation, achieved penetration to greater depths at a site in Crewkerne, Dorset where compressional head-wave penetration was limited to the near-surface layers. Better vertical resolution was achieved at shallow depths using shear-wave reflection energy at a landfill site. Shear-wave reflections from shallow interfaces were in some cases less affected by noise compared with the equivalent compressional-wave reflections. Combinations of shear- and compressional-wave data recording allowed the measurement of a Poisson's ratio log and gave indications of seismic anisotropy at two sites where dipping clay layers were present.  相似文献   

The use of the natural gamma log in engineering geological investigations     

A. C. Cripps  D. M. McCann   《Engineering Geology》2000,55(4):313-324

The natural gamma log is widely used in both cased and uncased boreholes to identify changes in lithology down the length of a borehole. This is particularly important in the ground investigation process where 100% core recovery is often not achieved in the borehole programme. In this paper the use of the gamma log to provide additional information from the ground investigation boreholes is examined and illustrated by a number of case histories. It is shown that the gamma log can be used to study both the lithological variations within an individual borehole and changes in geological structure across a construction site. It is also demonstrated that a geological formation or sequence can be classified in terms of its natural gamma signature, which enables the geologist to observe its presence over large distances on a regional basis. The importance of the calibration of the gamma sonde and the use of the correct logging speed is emphasised in the paper. The successful calibration of the log against a quarry wall using a known observed geological structure as a reference is also described together with the use of the resulting information to obtain a geological log for boreholes drilled behind the quarry face. Its use in extrapolating between boreholes to detect and trace the presence of a particular geological formation to estimate its vertical and lateral extent for possible extraction is also discussed.  相似文献   

Editorial     

D. M. McCann  C. A. Green 《Surveys in Geophysics》1991,12(6):iii-iv

  相似文献   

Style and evolution of salt pillows and related structures in the northern part of the Northeast German Basin     

Dirk Kossow  Charlotte Krawczyk  Tommy McCann  Manfred Strecker  Jörg F. Negendank 《International Journal of Earth Sciences》2001,90(2):470-470

  相似文献   

Collaborative Visioning or Urban Planning as Therapy? The Politics of Public‐Private Policy Making     

Eugene J. McCann 《The Professional geographer》2001,53(2):207-218

One aspect of a recent restructuring of urban economies, societies, and spaces has been a change in urban planning practice. Planning is increasingly privatized and decentralized in U.S. cities. Private planning consultants are often hired by public‐private coalitions in order to shape the future of cities, while the planning processes they institute are frequently claimed to be consensus‐based, collaborative, and inclusionary, rather than elite‐centered and expert‐driven. This paper discusses the use of “visioning”—an increasingly popular technique that develops goals for the future of a city through consensus‐based meetings, open to all parties—as developed by New Century Lexington, a public‐private planning initiative in Lexington, Kentucky. It argues that: (1) new public‐private planning procedures, incorporating collaborative techniques, frequently become the institutional sites of political struggle over how future urban geographies are produced; (2) in order to understand the role of visioning in contemporary urban politics and in policy making outcomes, we must recognize the sociospatial context in which it is deployed; and (3) in the case of New Century, the way in which local elites controlled the mechanics of the visioning process made dissent difficult and, therefore, produced a vision of the future largely parallel to their standard economic development models.  相似文献   

Velocity anisotropy and attenuation of shale in under- and overpressured conditions   总被引：1，自引：0，他引：1  

Patricia Domnesteanu  Clive McCann  Jeremy Sothcott 《Geophysical Prospecting》2002,50(5):487-503

The seismic velocity and attenuation of fully saturated shales were measured for the first time under overpressured conditions, using the ultrasonic reflection technique. Shale cores from naturally overpressured horizons in the North Sea were tested in the laboratory, at confining and pore pressures relevant to in situ conditions.
A single-frequency tone-burst pulse wave was used to determine the seismic wave velocities and quality factors of the shale samples, with errors less than 0.3% and 0.1 dB/cm, respectively, at a frequency of 0.75 MHz. Sample length changes with varying confining and pore pressure were measured and the pore pressure equilibration time was monitored for each sample.
The anisotropy of the seismic attributes ( V _p, V _s, Q _p and Q _s) was determined over a range of differential pressures from 5 to 60 MPa, with respect to the predominant foliation. The ultrasonic velocity data followed a transversely isotropic pattern depending on the direction of wave propagation with respect to the laminations. The Poisson's ratio was found to rise by 5% as the shale material progressed from a normally pressured to an overpressured state. The quality factor ( Q ) characteristics were interpreted in terms of pore geometry and connectivity as well as the directional permeability of the transversely isotropic shale material. The results were converted to bulk and shear loss modulus defects, and a positive bulk loss was observed for waves propagating perpendicular to the lamination plane even above differential pressures of 20 MPa. This indicates different levels of Biot-flow and squirt-flow attenuation mechanisms acting within the shale structure, depending on the wave propagation and vibration directions.  相似文献   

Interrupting a multi-species bioinvasion vector: the efficacy of in-water cleaning for removing biofouling on obsolete vessels     

Davidson IC  McCann LD  Sytsma MD  Ruiz GM 《Marine pollution bulletin》2008,56(9):1538-1544

Vector management is the primary method for reducing and preventing nonindigenous species (NIS) invasions and their ecological and economic consequences. This study was the first to examine the efficacy of in-water scrubbing using a submersible cleaning and maintenance platform (SCAMP) to prevent invertebrate species transfers from a heavily fouled obsolete vessel. Initially, prior to treatment, 37 species were recorded in a biofouling matrix that reached 30cm depth in some locations. The bryozoan Conopeum chesapeakensis, and bivalves Mytilopsis leucophaeata and Ischadium recurvum, were dominant sessile species that created structure, supporting mobile biota that included crabs and the associated parasitic barnacle Loxothylacus panopae. Scrubbing had the effect of significantly reducing organism extent and the number of species per sample, but a substantial and diverse (30 species) residual fouling community remained across the entire vessel. Further assessments of management options are needed to prevent potentially damaging NIS transfers. Additional measures taken within an integrated vector management (IVM) strategy may further improve invasion prevention measures.  相似文献   

Low energy neutral atom imaging on the Moon with the SARA instrument aboard Chandrayaan-1 mission     

Anil Bhardwaj  Stas Barabash  Yoshifumi Futaana  Yoichi Kazama  Kazushi Asamura  David McCann  R. Sridharan  Mats Holmstrom  Peter Wurz  Rickard Lundin 《Journal of Earth System Science》2005,114(6):749-760

This paper reports on the Sub-keV Atom Reflecting Analyzer (SARA) experiment that will be flown on the first Indian lunar mission Chandrayaan-1. The SARA is a low energy neutral atom (LENA) imaging mass spectrometer, which will perform remote sensing of the lunar surface via detection of neutral atoms in the energy range from 10 eV to 3 keV from a 100km polar orbit. In this report we present the basic design of the SARA experiment and discuss various scientific issues that will be addressed. The SARA instrument consists of three major subsystems: a LENA sensor (CENA), a solar wind monitor (SWIM), and a digital processing unit (DPU). SARA will be used to image the solar wind-surface interaction to study primarily the surface composition and surface magnetic anomalies and associated mini-magnetospheres. Studies of lunar exosphere sources and space weathering on the Moon will also be attempted. SARA is the first LENA imaging mass spectrometer of its kind to be flown on a space mission. A replica of SARA is planned to fly to Mercury onboard the BepiColombo mission.  相似文献