Evaluation of formation pore pressure behind the casing using borehole gravity data     

Yuliy A. Dashevsky  Semen Petrov  Alexandr N. Vasilevskiy  Oleg B. Bocharov  Gleb V. Dyatlov 《Studia Geophysica et Geodaetica》2017,61(1):69-92

Reliable estimates of the fluid pressure in the pore space of rocks are critical for different aspects of petroleum exploration and production including injection operations and scenarios of water flooding. Numerous approaches are available for formation pore pressure evaluation, however, these measurements become a challenge inside a cased borehole, and a list of possible options is short: either the casing is to be perforated, or the production tubing needs to be disconnected to perform the pressure tests. We present a method for through-casing evaluation of formation pore pressure without shutting down production. We suggest equipping an observation well with a borehole gravimeter and acquiring time variations of the vertical component of the gravity field. Changes in gravity occur during gas production and are related to time variations of formation pore pressure. Gravity changes obtained in the observation well are supposed to be inverted for time-dependent formation pore pressure variations beyond the casing. Our results and recommendations are based on numerical modeling of pore pressure spatial distribution during gas field exploitation and relevant changes in borehole gravity. Benchmark models were elaborated in order to consider a dynamic process of pressure changes in time and space under conditions similar to those in the Medvezhye gas field (Russia). Different modeling scenarios are considered for early and late stages of gas field exploitation. The sensitivity analysis was performed to estimate quantitatively a sensitivity of borehole temporal gravity changes to variations in formation pore pressure behind the casing. Based on resolution analysis we justify the possibility to extract the gravity measurements directly related to changes in pore pressure from the total changes in the gravity field due to reservoir exploitation. The impact of pore pressure on the gravity field measured in boreholes during the water flooding is also evaluated, and obtained results are discussed.  相似文献   

Oblique Wave-Induced Responses of A VLFS Edged with A Pair of Inclined Perforated Plates     

CHENG Yong  JI Chun-yan  ZHAI Gang-jun  Gaidai Oleg 《海洋工程》2018,32(1):14-25

This paper is concerned with the hydroelastic responses of a mat-like, rectangular very large floating structure (VLFS) edged with a pair of horizontal/inclined perforated anti-motion plates in the context of the direct coupling method. The updated Lagrangian formulae are applied to establish the equilibrium equations of the VLFS and the total potential formula is employed for fluids in the numerical model including the viscous effect of the perforated plates through the Darcy''s law. The hybrid finite element-boundary element (FE-BE) method is implemented to determine the response reduction of VLFS with attached perforated plates under various oblique incident waves. Also, the numerical solutions are validated against a series of experimental tests. The effectiveness of the attached perforated plates in reducing the deflections of the VLFS can be significantly improved by selecting the proper design parameters such as the porous parameter, submergence depth, plate width and inclination angle for the given sea conditions.  相似文献   

A piecewise curve-fitting technique for vertical oceanographic profiles and its application to density distribution     

Viacheslav G. Makarov  Oleg V. Zaytsev  Valentina D. Budaeva  Felipe Salinas-Gonzalez 《Journal of Oceanography》2008,64(5):675-690

A unified method of approximation, extrapolation, and objective layering is offered for processing vertical oceanographic profiles. The method is demonstrated using seawater density and consists of adjustable splitting of each individual profile into N vertical layers based on tentative, piecewise linear homogeneous approximation with specified accuracy and a final fitting of an N-layered analytical model to data. A set of 3N coefficients of the model includes one density value at the sea surface; N−1 depths of layer interfaces; and N pairs of coefficients that describe a profile shape within the n-th layer—an asymptotic density value (a key parameter for extrapolation) and a vertical scale of maximum density variability (related to vertical gradient). Several distinctive characteristics of the technique are: (1) It can be used for the analysis of the vertical structure of individual profiles when N is an unknown parameter, and spatial interpolation when N should be equal for all profiles. (2) A justified downward extrapolation of incomplete data is possible with the model, especially if historical deepwater profiles are available. (3) Layer interfaces, as well as other coefficients, are derived with only one fitting to the entire profile. (4) The technique, using its general formulation, can serve as a parent for developing various types of models. The simpler step-like (with hyperbolic or exponential approximation) and more complicated smooth (continuous in gradient space) models were designed and tested against a large number of density profiles from the Sea of Okhotsk and the Gulf of California. Comparison of parametric, z-levels and isopycnal averaging was done for the region off the northeastern coast of Sakhalin.  相似文献