Near-Surface Flow Fields Deduced Using Correlation Tracking and Time-Distance Analyses     

De Rosa  Marc  Duvall  T.L.  Toomre  Juri 《Solar physics》2000,192(1-2):351-361

Near-photospheric flow fields on the Sun are deduced using two independent methods applied to the same time series of velocity images observed by SOI-MDI on SOHO. Differences in travel times between f modes entering and leaving each pixel measured using time-distance helioseismology are used to determine sites of supergranular outflows. Alternatively, correlation tracking analysis of mesogranular scales of motion applied to the same time series is used to deduce the near-surface flow field. These two approaches provide the means to assess the patterns and evolution of horizontal flows on supergranular scales even near disk center, which is not feasible with direct line-of-sight Doppler measurements. We find that the locations of the supergranular outflows seen in flow fields generated from correlation tracking coincide well with the locations of the outflows determined from the time-distance analysis, with a mean correlation coefficient after smoothing of _s=0.890. Near-surface velocity field measurements can be used to study the evolution of the supergranular network, as merging and splitting events are observed to occur in these images. The data consist of one 2048-min time series of high-resolution (0.6 pixels) line-of-sight velocity images taken by MDI on 1997 January 16–18 at a cadence of one minute.  相似文献   

PM₁₀ and heavy metal measurements in an industrial area of southern Italy   总被引：1，自引：0，他引：1  

Maria Ragosta  Rosa Caggiano  Mariagrazia D'Emilio  Serena Sabia  Serena Trippetta  Maria Macchiato   《Atmospheric Research》2006,81(4):304-319

Atmospheric particulate concentrations and heavy metal content are measured from March to July 2001 at an industrial site located in a rural zone of the southern Italy. PM₁₀ samples are collected by a low-volume sampler and each sample is analysed by AAS techniques for its content of Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. We measure also temperature, atmospheric pressure and relative humidity, and we collect anemometric data. The study purpose is the investigation of pollutant levels in an industrial area located in a rather unpolluted region and the characterization of the correlation structure among particulate concentrations, heavy metal content and local meteorological parameters. Data analysis is carried out by means of univariate and multivariate statistical methods. In the investigated period, the average value of PM₁₀ daily concentrations (24 μg Nm^− 3) does not exceed the national standard of 40 μg Nm^− 3 and only nine values are higher than the European daily limit value of 50 μg Nm^− 3. Particularly, the occurrence of two anomalous values (183 μg Nm^− 3 in 3 March and 94 μg Nm^− 3 in 22 June) seems to be related to no-local events as confirmed both by in situ data measured in the AQM network of Potenza city (about 10 km far from the study area) and by remote measurements performed in the same days. Regarding the heavy metal levels, we observe high levels of Cr (34 ng Nm^− 3), Ni (85 ng Nm^− 3) and Zn (214 ng Nm^− 3) in agreement with the local industrial source pattern. The multivariate analysis, carried out using meteorological parameters as exogenous variables, allow to evaluate the role of the different variables as driving factors of the correlation structure among the metals.  相似文献   

Could the Observable Universe Be Inside of a Black Hole?     

Rosa Doran  Paulo Crawford 《Astrophysics and Space Science》1998,261(1-4):301-302

  相似文献   

Axially symmetric flow round a non-conducting obstacle in the shape of a hemisphere by a homogeneous electrical current field     

Klement Rosa  Reviewer O. Praus 《Studia Geophysica et Geodaetica》1981,25(4):376-392

m amamu n¶rt;ma au ¶rt; nmuaa mu n ma a, ¶rt;a ¶rt;¶rt; maua mu n ¶rt; nmam ¶rt;um n¶rt; nnmmu n. u m umau n aa mau a, m m nmmu ma nu ¶rt;¶rt; n naa u umuu n. maa a¶rt;aa a u um ¶rt;uam. a u nu¶rt;m um ua u au, nu u n a auu mam, n¶rt;ma [5, 6]. m um nu num m amamu au ¶rt; nmuaa mu n, n¶rt;mau u¶rt; ¶rt;a nu a¶rt;a.  相似文献   

Monte guardia sequence: a late-pleistocene eruptive cycle on Lipari (Italy)     

G. M. Crisci  R. De Rosa  G. Lanzafame  R. Mazzuoli  M. F. Sheridan  G. G. Zuffa 《Bulletin of Volcanology》1981,44(3):241-255

This paper documents a complex sequence of interbedded lapilli-fall, base-surge, and pyroclastic-flow deposits, here named the Monte Guardia sequence, that erupted from volcanic centers in the southern part of Lipari (Aeolian Island Arc). Radiocarbon data from ash-flow tuffs above and below this sequence bracket its eruption between 22,600 and 16,800 years ago. Geologic evidence, however, suggests that this single eruptive cycle had a more restricted duration of years to tens-of-years. The basis for our interpretations comes from data measured at 38 detailed sections located throughout the island. The Monte Guardia sequence rests on a series of lower rhyolitic endogenous domes in the southern part of Lipari and it covers the oldest lavas, lahars, and pyroclastic flows in the north. Only in the northeast part of the island is it covered by younger deposits which there consist of lapilli tuffs and lavas of the Monte Pilato rhyolitic cycle. The deposit ranges in thickness from more than 60 m surrounding the vents in the south to less than a few decimeters at 10 km distance in the north. Throughout most of the island the Monte Guardia sequence overlies a thin andesitic lapilli-fall layer which is a key bed for correlation. This lapilli tuff probably erupted from a volcanic center on another island of the Aeolian Arc (possibly Salina). The principal activity of the Monte Guardia sequence started with an explosion that formed a continuous breccia blanket covering most of the island. Some pumiceous blocks within this breccia are composed of alternating bands of acidic and andesitic composition suggesting that the initiation of pyroclastic activity could have been triggered by magma mixing. Typical Monte Guardia sequence consists of explosive products that grade from magmatic (pumice-fall) to phreatomagmatic (base-surge) character. The eruptive cycle is characterized by a number of energy decreasing megarhythms that start with a lapilli-fall bed and end with a base-surge set that progresses through sand-wave, massive, and planar beds. Isopach maps of the fall and surge deposits indicate that both types were directed to the northwest by prevailing winds. Existing topographic relief was an additional factor that affected the emplacement of surge products. At the end of the cycle andesitic pyroclastic flows and rhyolitic endogenous domes were emplaced above the Monte Guardia deposits near the vent.  相似文献   

Dirichlet's problem for a body limited by two intersecting spherical surfaces     

Klement Rosa  Reviewer T. Kolbenheyer 《Studia Geophysica et Geodaetica》1977,21(3-4):236-241

Summary The solution of the internal and external Dirichlet problem is given without assuming rotational symmetry for a body, limited by two intersecting spherical surfaces. The problem is treated in a toroidal system of co-ordinates, using the generalized Mehler integral transform. The results are compared with the solution, presented by Lebedev [1] for the case of rotational symmetry.  相似文献   

Implementation of the European Water Framework Directive: Natural variability associated with the CARLIT method on the rocky shores of the Ligurian Sea (Italy)     

Valentina Asnaghi  Mariachiara Chiantore  Rosa‐Maria Bertolotto  Valeriano Parravicini  Riccardo Cattaneo‐Vietti  Federico Gaino  Paolo Moretto  Davide Privitera  Luisa Mangialajo 《Marine Ecology》2009,30(4):505-513

The Water Framework Directive (WFD) 2000/60/EC, adopted by the European Community in 2000 with the goal of maintaining and improving the aquatic environments, requires that member states achieve and maintain a good ecological status of all water bodies by 2015. In the marine context, the ecological status has to be quantified applying indexes based on appropriate key biological elements, which allow the categorization of water bodies into five Ecological Status (ES) classes. The CARLIT index is a cartographic monitoring tool enabling the Ecological Quality Ratio (EQR) to be calculated using macroalgae in coastal hard bottoms as a key biological element; at present it is being applied in Spain, France and Italy. To detect actual changes of water quality and, consequently, rely on the application of indexes for the assessment of the ecological status in the marine environment, it is necessary to evaluate their sensitivity to natural variability at different temporal and spatial scales. In this study we present a first quantification of natural (spatial and temporal) variability of EQR‐CARLIT quality assessment in 2006 and 2007 along the Ligurian coast (North‐Western Mediterranean, Italy). The EQR‐CARLIT values recorded along the Ligurian coastline show that natural variability of EQR‐CARLIT is low and that it does not affect the attribution of a given stretch of coast to a particular ES class, in agreement with the major human pressures acting in the area (urbanization, river load, sea‐farming). A small‐scale variability was detected, strengthening the use of cartography of the whole rocky shore, whenever possible, or, alternatively, the assessment of the ecological status for long stretches of coast, to encompass the small‐scale variability due to local factors.  相似文献   

Broad-band X-ray spectrum of the newly discovered broad-line radio galaxy IGR J21247+5058     

M. Molina  M. Giroletti  A. Malizia  R. Landi  L. Bassani  A. J. Bird  A. J. Dean  A. De Rosa  M. Fiocchi  F. Panessa 《Monthly notices of the Royal Astronomical Society》2007,382(2):937-943

  相似文献   

Coloured dissolved organic matter (CDOM) in Southern North Sea waters: Optical characterization and possible origin   总被引：1，自引：0，他引：1  

Rosa Astoreca  Véronique Rousseau  Christiane Lancelot 《Estuarine, Coastal and Shelf Science》2009

The variability and origin of the Coloured Dissolved Organic Matter (CDOM) were studied in the Belgian coastal and adjacent areas including offshore waters and the Scheldt estuary, through the parameters: absorption at 375 nm, a_CDOM(375), and the slope of the absorption curve, S. a_CDOM(375) varied between 0.20 and 1.31 m⁻¹ and between 0.97 and 4.30 m⁻¹ in the marine area and Scheldt estuary, respectively. S fluctuated between 0.0101 and 0.0203 nm⁻¹ in the marine area and between 0.0167 and 0.0191 nm⁻¹ in the Scheldt estuary. The comparative analysis of a_CDOM(375) and S variations evidenced different origins of CDOM in the BCZ. The Scheldt estuarine waters showed decreasing a_CDOM(375) values with increasing salinity but constant S value of ∼0.018 nm⁻¹ suggesting a dominant terrestrial origin of CDOM. On the contrary, samples collected in the marine domain showed a narrow range of a_CDOM(375) but highly variable S suggesting the additional presence of autochthonous sources of CDOM. This source was evidenced based on the sorting of the marine offshore data according to the stage of the phytoplankton bloom when they were collected. A clear distinction was made between CDOM released during the growth stage characterized by high S (∼0.017 nm⁻¹) and low a_CDOM(375) and the decay phase characterized by low S (∼0.013 nm⁻¹) and high a_CDOM(375). This observation was supported by CDOM measurements performed on pure phytoplankton cultures which showed increased CDOM release along the wax and wane of the bloom but decreasing S. We concluded that the high variability of the CDOM signature in offshore waters is explained by the local biological production and processing of CDOM.  相似文献   

A reach‐scale biogeochemical model for temporary rivers     

Ourania Tzoraki  Nikolaos P. Nikolaidis  Anna Rosa Trancoso  Frank Braunschweig  Ramiro Neves 《水文研究》2009,23(2):272-283

The RS‐tempQ Model ( r each– s cale t emporary flow biogeochemical model) is a conceptual model that can describe the hydrologic, sediment transport and biogeochemical processes of temporary rivers at the reach scale. The model takes into account the expansion–contraction of the inundated area of the river. It simulates the sediment transport and the nutrient fluxes that are transferred to the coastal area due to the first flash flood and during extreme rain events. The RS‐tempQ Model simulates the in‐stream processes during the wet and dry cycles as the river corridor expands and contracts. The model was used to assess and quantify the hydrologic and geochemical processes occurring in a temporary river reach (Krathis River) in Greece. Since the conventional gauging techniques cannot measure the flow in rivers that are split into small braided streams, discharge measurements could not be obtained in order to calibrate and verify the model. Other field measurements such as infiltration losses and sediment accumulation were used for model calibration. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献