Simulations of dense planetary rings: IV. Spinning self-gravitating particles with size distribution     

Ryuji Morishima  Heikki Salo 《Icarus》2006,181(1):272-291

Previous self-gravitating simulations of dense planetary rings are extended to include particle spins. Both identical particles as well as systems with a modest range of particle sizes are examined. For a ring of identical particles, we find that mutual impact velocity is always close to the escape velocity of the particles, even if the total rms velocity dispersion of the system is much larger, due to collective motions associated to wakes induced by near-gravitational instability or by viscous overstability. As a result, the spin velocity (i.e., the product of the particle radius and the spin frequency) maintained by mutual impacts is also of the order of the escape velocity, provided that friction is significant. For the size distribution case, smaller particles have larger impact velocities and thus larger spin velocities, particularly in optically thick rings, since small particles move rather freely between wakes. Nevertheless, the maximum ratio of spin velocities between the smallest and largest particles, as well as the ratio for translational velocities, stays below about 5 regardless of the width of the size distribution. Particle spin state is one of the important factors affecting the temperature difference between the lit and unlit face of Saturn's rings. Our results suggest that, to good accuracy, the spin frequency is inversely proportional to the particle size. Therefore, the mixing ratio of fast rotators to slow rotators on the scale of the thermal relaxation time increases with the width of the particle size distribution. This will offer means to constrain the particle size distribution with the systematic thermal infrared observations carried by the Cassini probe.  相似文献   

Acid‐susceptive material as a host phase of argon‐rich noble gas in the carbonaceous chondrite Ningqiang     

Tomoki NAKAMURA  Michael ZOLENSKY  Minoru SEKIYA  Ryuji OKAZAKI  Keisuke NAGAO 《Meteoritics & planetary science》2003,38(2):243-250

Abstract— A fine‐grained dark inclusion in the Ningqiang carbonaceous chondrite consists of relatively pristine solar nebular materials and has high concentrations of heavy primordial rare gases. Trapped 36Ar concentration amounts to 6 times 10^?6 cc STP/g, which is higher than that of Ningqiang host by a factor of three. Light HF‐HCl etching of the dark inclusion removed 86, 73, and 64% of the primordial ³⁶Ar, ⁸⁴Kr, and ¹³²Xe, respectively. Thus, the majority of the noble gases in this inclusion are located in very acid‐susceptive material. Based on the elemental composition, the noble gases lost from the dark inclusion during the acid‐treatments are Ar‐rich, and the noble gases remaining in the inclusion are Q and HL gases. Transmission electron microscopy showed that the acid treatments removed thin Si, Mg, and Fe‐rich amorphous rims present around small olivine and pyroxene grains in the dark inclusion, suggesting that the Ar‐rich gases reside in the amorphous layers. A possible origin of the Ar‐rich gases is the acquisition of noble‐gas ions with a composition fractionated relative to solar abundance favoring the heavy elements by the effect of incomplete ionization under plasma conditions at 8000 K electron temperature.  相似文献   

Upper Eocene travertine-lacustrine carbonate in the Jianchuan basin,southeastern Tibetan Plateau: Reappraisal of its origin and implication for the monsoon climate     

Aki Sakuma  Akihiro Kano  Yoshihiro Kakizaki  Ryuji Tada  Honbo Zheng 《Island Arc》2021,30(1):e12416

The Asian monsoon is one of the largest climatic systems in the world, but age of its onset has been estimated differently ranging from the late Eocene to the Quaternary. We investigated the sedimentology and stable isotopic compositions of the upper Eocene Jiuziyan Formation, a terrestrial limestone unit in the Jianchuan basin, Yunnan Province in China. This limestone formation is restricted in several localities in the central part of the basin. Previously, this has been characterized as palustrine carbonate and the transition to the sublacustrine deposit of the overlying Shuanghe Formation was interpreted as the appearance of wetter climate during the late Eocene. Our observations of macro- and microfacies revealed sedimentary fabrics indicating rapid CaCO₃ precipitation, such as dendritic calcite and calcified reed stems, which are unlikely to develop in a simple lacustrine setting. High carbonate content (mostly >90 %) and restricted distribution of the Jiuziyan limestone indicate a depositional setting spatially limited and isolated from clastic influx. These findings, together with clearly higher δ¹³C values (−0.7 ‰ to +6.9 ‰) and lower δ¹⁸O values (−14.6 ‰ to −10.5 ‰) than those of the Shuanghe Formation, indicate that the limestone was mainly travertine, carbonate formed from endogenic spring water. The elevated δ¹³C resulted from a large amount of CO₂ degassing from spring water with high pCO₂. In addition, the occurrence of centimeter-scale lamination coupled with cyclic changes in δ¹³C and δ¹⁸O is almost identical with the modern annually-laminated travertine reported from Baishuitai in northern Yunnan Province, implying comparable amplitude of seasonal temperature and precipitation changes to the record of the modern travertine at Baishuitai. Our results do not contradict the previous interpretation of late Eocene wetting and additionally suggest the existence of the late Eocene monsoon climate in the Jianchuan basin.  相似文献   

Financial risk management for energy service project under the Tokyo emission trading system     

Tsuyoshi Yoshioka  Michinobu Furukawa  Koji Yoshizaki  Ryuji Matsuhashi  Yoshikuni Yoshida 《Stochastic Environmental Research and Risk Assessment (SERRA)》2011,25(5):677-683

Recently, energy service providers (ESP) have increased due to deregulation in the power market. They install energy supply equipment at their own cost and supply the necessary energy to the client. The Tokyo Metropolitan Government started Asia’s first cap-and-trade program in April 2010. This program caps energy-related carbon dioxide emissions from some 1,330 offices and factories in Tokyo. Then, ESPs have to manage the many risks of energy service project directly linked to the profits. In this paper, we describes the risk analysis and investment optimization for energy service projects using financial engineering.  相似文献   

Improved provenance tracing of Asian dust sources using rare earth elements and selected trace elements for palaeomonsoon studies on the eastern Tibetan Plateau   总被引：2，自引：0，他引：2  

Marion Ferrat  Dominik J. Weiss  Stanislav Strekopytov  Hongyun Chen  Youbin Sun  Ryuji Tada 《Geochimica et cosmochimica acta》2011,75(21):6374-6399

The Asian Monsoon forms an important part of the earth’s climate system, yet our understanding of the past interactions between its different sub-systems, the East Asian and Indian monsoons, and between monsoonal winds and other prevailing wind currents such as the Westerly jet, is limited, particularly in central Asia. This in turn affects our ability to develop climate models capable of accurately predicting future changes in atmospheric circulation patterns and monsoon intensities in Asia. Provenance studies of mineral dust deposited in terrestrial settings such as peat bogs can address this problem directly, by offering the possibility to examine past deposition rates and wind direction, and hence reconstruct past atmospheric circulation patterns. However, such studies are challenged by several issues, most importantly the identification of proxies that unambiguously distinguish between the different potential dust sources and that are independent of particle size. In addition, a single analytical method that is suitable for sample preparation of both dust source (i.e. desert sand, soil) and receptor (i.e. dust archive such as peat or soil profiles) material is desirable in order to minimize error propagation derived from the experimental and analytical work. Here, an improved geochemical framework of provenance tracers to study atmospheric circulation patterns and palaeomonsoon variability in central Asia is provided, by combining for the first time mineralogical as well as major and trace elemental (Sc, Y, Th and the rare earth elements) information on Chinese (central Chinese loess plateau, northern Qaidam basin and Taklamakan, Badain Juran and Tengger deserts), Indian (Thar desert) and Tibetan (eastern Qinghai-Tibetan Plateau) dust sources.Quartz, feldspars and clay minerals are the major constituents of all studied sources, with highly variable calcite contents reflected in the CaO concentrations. Chinese and Tibetan dust sources are enriched in middle REE relative to the upper continental crust and average shale but the Thar desert has a REE signature distinctly different from all other dust sources. There are significant differences in major, trace and REE compositions between the coarse and fine fractions of the surface sands, with the finest <4 μm fraction enriched in Al₂O₃, Fe₂O₃, MnO, MgO and K₂O and the <32 μm fractions in Sc, Y, Th and the REE relative to the coarse fractions. The <4 μm fraction best represents the bulk REE geochemistry of the samples. The provenance tracers Y/∑REE, La/Er, La/Gd, Gd/Er, La/Yb, Y/Tb, Y/La, Y/Nd and to a certain extent the europium anomaly Eu/Eu^∗ (all REE normalized to post-Archean Australian shale, PAAS) are particle size-independent tracers, of which combinations of Y/∑REE, La/Yb, Y/Tb, Y/La and Eu/Eu^∗ can be used to distinguish the Thar desert, the Chinese deserts, the Chinese loess plateau and the Tibetan soils. Their independence upon grain size means that these tracers can be applied to the long-range provenance tracing of Asian dust even when only bulk samples are available in the source region. Combinations of La/Th, Y/Tb, Y/∑REE, Sc/La and Y/Er distinguish the Tibetan soils from the Chinese loess plateau and the Chinese deserts. La/Th and notably Th/∑REE isolate the signature of the Badain Juran desert and the combination of Sc/La and Y/Er that of the Taklamakan desert. The similarity in all trace and REE-based provenance tracers between the northern Qaidam basin and Tengger desert suggests that these two deposits may have a common aeolian source.  相似文献   

Density measurements of liquid Fe–Si alloys at high pressure using the sink–float method     

Ryuji Tateyama  Eiji Ohtani  Hidenori Terasaki  Keisuke Nishida  Yuki Shibazaki  Akio Suzuki  Takumi Kikegawa 《Physics and Chemistry of Minerals》2011,38(10):801-807

The compositional dependence on the density of liquid Fe alloys under high pressure is important for estimating the amount of light elements in the Earth’s outer core. Here, we report on the density of liquid Fe–Si at 4 GPa and 1,923 K measured using the sink–float method and our investigation on the effect of the Si content on the density of the liquid. Our experiments show that the density of liquid Fe–Si decreases from 7.43 to 2.71 g/cm³ non-linearly with increasing Si content (0–100 at%). The molar volume of liquid Fe–Si calculated from the measured density gradually decreases in the compositional range 0–50 at% Si, and increases in the range 50–100 at% Si. It should be noted that the estimated molar volume of the alloys shows a negative volume of mixing between Fe and Si. This behaviour is similar to Fe–S liquid (Nishida et al. in Phys Chem Miner 35:417–423, 2008). However, the excess molar volume of mixing for the liquid Fe–Si is smaller than that of liquid Fe–S. The light element contents in the outer core estimated previously may be an underestimation if we take into account the possible negative value of the excess mixing volume of iron–light element alloys in the outer core.  相似文献   

Flocculation and particle size analysis of expansive clay sediments affected by biological, chemical, and hydrodynamic factors     

Xiaoling Tan  Liming Hu  Allen H. Reed  Yoko Furukawa  Guoping Zhang 《Ocean Dynamics》2014,64(1):143-157

Expansive clay sediments are abundant in riverine and estuarine waters and bottom beds, and their particle size distributions (PSD) are important for the analysis of sediment transport. This paper presents an experimental study to evaluate, using a laser particle size analyzer under varying flow conditions, the intrinsic PSD of two expansive clays, a Ca- and a Na-montmorillonite and the influence of biological, chemical, and hydrodynamic factors on their flocculation and PSD. The considered biological factor consists of three extracellular polymeric substances of varying polarity, including xanthan gum, guar gum, and chitosan; the chemical factor is the salinity; and the hydrodynamic factor is the types of flow indicated by the Reynolds number and shear rate. The intrinsic PSD of both clays show a multimodal lognormal distribution with sizes ranging from 0.2 to 50 μm. All three biopolymers, xanthan gum, guar gum, and chitosan, can facilitate flocculation through long-range polymer bridging and short-range ion-dipole interaction, hydrogen bonding, and Coulomb force. The influence of salinity is different for the two clays: the particle size of the Na-montmorillonite increases with salinity, which is caused by flocculation resulting from the suppressed electrical double layer, while that of the Ca-montmorillonite is slightly reduced owing to the decreased basal spacing and cation exchange. For different hydrodynamic conditions, higher shear rate promotes the flocculation of Ca-montmorillonite, but breaks the Na-montmorillonite flocs. The significance of understanding the flocculation and PSD of expansive clays is also discussed in terms of sediment transport under different aquatic environments.  相似文献   

Parameterization of rain cell properties using an advection-diffusion model and rain gage data     

Akira Kawamura  Kenji Jinno  Ronny Berndtsson  Takashi Furukawa 《Atmospheric Research》1996,42(1-4)

To reduce flooding risks and improve urban drainage management, there is a need to increase the forecasting accuracy for rainfall models on small typical urban time and space scales. Increased rainfall forecasting accuracy will in turn improve runoff prediction and thus, prevent flooding hazards, decrease pollution discharge through combined sewers, increase waste water treatment efficiency, etc. For this purpose, we analyzed the parameters of a two-dimensional stochastic advection-diffusion model including a Fourier domain method and an extended Kalman filter algorithm for investigation of motion, shape, size, and intensity distribution of convective rainfall. The resulting set of model parameters (advective velocity, apparent turbulent diffusion, and development/decay of rainfall rate) is used to study convective rainfall variability. It appears that the speed at which the rainfall cell is advected is not dependent on the cell development stage or apparent diffusion. Instead, there is a dependence between the source/sink term and apparent diffusion. This can be explained by the turbulent updraft of warm air which results in large rainfall intensity increase. This strong turbulence results in larger diffusion (and vice versa). The behavior of the model parameters is therefore physically explainable and relevant. The results can be used as first choice of parameter values when modeling convective rainfall over ungaged areas.  相似文献   

In situ stress measurements in a borehole close to the Nojima Fault   总被引：1，自引：0，他引：1  

Hiroaki Tsukahara  Ryuji Ikeda  Kiyohiko Yamamoto 《Island Arc》2001,10(3-4):261-265

Abstract In situ stress was measured close to the fault associated with the 1995 Kobe Earthquake (Hyogo-ken Nanbu earthquake; January 1995; M 7.2) using the hydraulic fracturing method. The measurements were made approximately 2 years after the earthquake. The measured points were approximately 40 m from the fault plane at depths of about 1500 m. The maximum and the minimum horizontal compressive stresses were 45 MPa and 31 MPa, respectively. The maximum compressive stress and the maximum shear stress are very small in comparison with those of other seismically active areas. The azimuth of the maximum horizontal compressive stress was estimated from the observed azimuths of well bore breakouts at depths between 1400 m and 1600 m and was found to be N135° (clockwise). The maximum stress axis is perpendicular to the fault strike, N45°. These features are interpreted in terms of a small frictional coefficient of the fault. The shear stress on the fault was released and dropped almost to zero during the earthquake and it has not yet recovered. Zero shear stress on the fault plane resulted from the perpendicular orientation of one of the principal stress to the fault plane.  相似文献   

Distribution of fault rocks in the fracture zone of the Nojima Fault at a depth of 1140 m: Observations from the Hirabayashi NIED drill core     

Kenta Kobayashi  Satoshi Hirano  Takashi Arai  Ryuji Ikeda  Kentaro Omura  Hiroyuki Sano  Takashi Sawaguchi  Hidemi Tanaka  Tomoaki Tomita  Naoto Tomida  Tatsuo Matsuda  Akiko Yamazaki 《Island Arc》2001,10(3-4):411-421

Abstract Characteristics of deformation and alteration of the 1140 m deep fracture zone of the Nojima Fault are described based on mesoscopic (to the naked eye) and microscopic (by both optical and scanning electron microscopes) observations of the Hirabayashi National Research Institute for Earth Science and Disaster Prevention (NIED) drill core. Three types of fault rocks; that is, fault breccia, fault gouge and cataclasite, appear in the central part of the fault zone and two types of weakly deformed and/or altered rocks; that is, weakly deformed and altered granodiorite and altered granodiorite, are located in the outside of the central part of the fault zone (damaged zone). Cataclasite appears occasionally in the damaged zone. Six distinct, thin foliated fault gouge zones, which dip to the south-east, appear clearly in the very central part of the fracture zone. Slickenlines plunging to the north-east are observed on the surface of the newest gouge. Based on the observations of XZ thin sections, these slickenlines and the newest gouge have the same kinematics as the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake), which was dextral-reverse slip. Scanning electron microscopy observations of the freeze-dried fault gouge show that a large amount of void space is maintained locally, which might play an important role as a path for fluid migration and the existence of either heterogeneity of pore fluid pressure or strain localization.  相似文献