Plate tectonics and the fusion of Asia     

Clive F. Burrett 《Earth and Planetary Science Letters》1974,21(2):181-189

The coincidence of orogenic belts containing zones of high pressure metamorphism, ophiolites and deepwater sediments with faunal province boundaries leads to the postulation of several sutural zones within Asia. About nine blocks are defined and it is suggested on the basis of palaeogeographical, palaeontological and tectonic evidence that Asia did not fuse completely until well into the Mesozoic.  相似文献   

Burial dolomitization of the Woo Dale Limestones Formation (Lower Carboniferous), Derbyshire, England     

KEVIN SCHOFIELD  ANTHONY E. ADAMS 《Sedimentology》1986,33(2):207-219

Dolomite occurs in open-shelf packstones and grainstones of the Vincent House Member of the Woo Dale Limestones Formation (Lower Carboniferous) in the Wye Valley area, east of Buxton, Derbyshire, Central England. Two stages of dolomitization can be recognized. Stage 1 consists of limpid, non-luminescent dolomite lacking detectable iron and manganese. Stage 2 comprises cloudy, inclusion-rich, orange-red luminescing dolomite with significant iron and manganese. The contact between the two stages is irregular and suggests a hiatus between dolomite growth stages. Dolostones lacking any unreplaced limestone may contain up to 35% calcite cement rilling intercrystal porosity. This cement shows a characteristic zonal sequence and is normally in optical continuity with the surrounding dolomite crystals. In some cases, precementation compaction of the dolomite mosaic caused fracturing of the crystals. Sherds of dolomite on the floors of pore-spaces then provided the nucleus for growth of calcite cement. The petrographic character and stratigraphic distribution of the dolomite suggest that dolomitization occurred at depth, during burial of the Woo Dale Limestones in the Late Carboniferous. Dolomitizing solutions, expelled from basinal shales, moved up-dip along permeable limestones or along the sub-Carboniferous unconformity. Fluids responsible for the generation of stage 2 dolomite may have been contaminated by ions such as iron and manganese released from the alteration of volcanic rocks which occur beneath the Carboniferous Limestone in the Wye Valley area.  相似文献   

Velocities of compressional and shear waves in limestones   总被引：2，自引：1，他引：2  

Solomon Assefa  Clive McCann  Jeremy Sothcott 《Geophysical Prospecting》2003,51(1):1-13

Carbonate rocks are important hydrocarbon reservoir rocks with complex textures and petrophysical properties (porosity and permeability) mainly resulting from various diagenetic processes (compaction, dissolution, precipitation, cementation, etc.). These complexities make prediction of reservoir characteristics (e.g. porosity and permeability) from their seismic properties very difficult. To explore the relationship between the seismic, petrophysical and geological properties, ultrasonic compressional‐ and shear‐wave velocity measurements were made under a simulated in situ condition of pressure (50 MPa hydrostatic effective pressure) at frequencies of approximately 0.85 MHz and 0.7 MHz, respectively, using a pulse‐echo method. The measurements were made both in vacuum‐dry and fully saturated conditions in oolitic limestones of the Great Oolite Formation of southern England. Some of the rocks were fully saturated with oil. The acoustic measurements were supplemented by porosity and permeability measurements, petrological and pore geometry studies of resin‐impregnated polished thin sections, X‐ray diffraction analyses and scanning electron microscope studies to investigate submicroscopic textures and micropores. It is shown that the compressional‐ and shear‐wave velocities (V_p and V_s, respectively) decrease with increasing porosity and that V_p decreases approximately twice as fast as V_s. The systematic differences in pore structures (e.g. the aspect ratio) of the limestones produce large residuals in the velocity versus porosity relationship. It is demonstrated that the velocity versus porosity relationship can be improved by removing the pore‐structure‐dependent variations from the residuals. The introduction of water into the pore space decreases the shear moduli of the rocks by about 2 GPa, suggesting that there exists a fluid/matrix interaction at grain contacts, which reduces the rigidity. The predicted Biot–Gassmann velocity values are greater than the measured velocity values due to the rock–fluid interaction. This is not accounted for in the Biot–Gassmann velocity models and velocity dispersion due to a local flow mechanism. The velocities predicted by the Raymer and time‐average relationships overestimated the measured velocities even more than the Biot model.  相似文献   

The acoustic signature of fluid flow in complex porous media   总被引：2，自引：0，他引：2  

Morten Jakobsen  Tor Arne Johansen  Clive McCann   《Journal of Applied Geophysics》2003,54(3-4):219

Effective medium approximations for the frequency-dependent and complex-valued effective stiffness tensors of cracked/porous rocks with multiple solid constituents are developed on the basis of the T-matrix approach (based on integral equation methods for quasi-static composites), the elastic–viscoelastic correspondence principle, and a unified treatment of the local and global flow mechanisms, which is consistent with the principle of fluid mass conservation. The main advantage of using the T-matrix approach, rather than the first-order approach of Eshelby or the second-order approach of Hudson, is that it produces physically plausible results even when the volume concentrations of inclusions or cavities are no longer small. The new formulae, which operates with an arbitrary homogeneous (anisotropic) reference medium and contains terms of all order in the volume concentrations of solid particles and communicating cavities, take explicitly account of inclusion shape and spatial distribution independently. We show analytically that an expansion of the T-matrix formulae to first order in the volume concentration of cavities (in agreement with the dilute estimate of Eshelby) has the correct dependence on the properties of the saturating fluid, in the sense that it is consistent with the Brown–Korringa relation, when the frequency is sufficiently low. We present numerical results for the (anisotropic) effective viscoelastic properties of a cracked permeable medium with finite storage porosity, indicating that the complete T-matrix formulae (including the higher-order terms) are generally consistent with the Brown–Korringa relation, at least if we assume the spatial distribution of cavities to be the same for all cavity pairs. We have found an efficient way to treat statistical correlations in the shapes and orientations of the communicating cavities, and also obtained a reasonable match between theoretical predictions (based on a dual porosity model for quartz–clay mixtures, involving relatively flat clay-related pores and more rounded quartz-related pores) and laboratory results for the ultrasonic velocity and attenuation spectra of a suite of typical reservoir rocks.  相似文献   

Three-Dimensional Geopositioning Accuracy of Ikonos Imagery   总被引：3，自引：0，他引：3  

Clive Fraser  Harry Hanley  & Takeshi Yamakawa 《The Photogrammetric Record》2002,17(99):465-479

An investigation of the accuracy potential of Ikonos 1m satellite imagery is reported. Three sensor orientation/triangulation models are applied to stereo- and three-image configurations of "Geo" imagery with the aim of achieving 3D geopositioning to sub-metre accuracy. The models considered comprise rational functions with bias compensation, affine projection and the direct linear transformation. Test results from the Melbourne Ikonos Testfield are reported and these show that with modest provision of good quality ground control, Ikonos "Geo" imagery can yield 3D object-point determination to an accuracy of 0.5m in planimetry and 0.7m in height. The accuracy achieved is not only consistent with expectations for rigorous sensor orientation models, but is also readily attainable in practice with only a small number of ground control points being required  相似文献   

Modelling the seismic attributes of overpressured siliciclastic rocks, with a genetic annealing (GAN) algorithm     

Patricia Domnesteanu  Robert Domnesteanu  Clive McCann 《Geophysical Prospecting》2002,50(2):169-182

ABSTRACT A genetic annealing (GAN) algorithm is used to derive an empirical model which predicts compressional-wave velocity values for overpressured siliciclastic rocks. The algorithm involves non-linear random searching and mutation techniques and its annealing component imposes a very strict control over the rate of convergence of the search. This technique provides an alternative to the standard calculations involving the effective stress coefficient ( n ). The pore pressure is introduced into the model as an explicit variable and as part of an overpressure coefficient, ( P _p/ P _c) − the ratio of pore to confining pressure. Empirical model-derived data and known laboratory data are compared and their differences are shown to be within statistically acceptable error limits. The empirical equation fits all under- and overpressured data simultaneously, irrespective of pore fluid pressure level, with the same parameters. It is used to predict seismic velocities very accurately for extreme levels of overpressure, starting from normally pressured experimental data. The model highlights the effect of pore pressure on the compressional-wave velocity of fully saturated samples with different clay contents. It can be used when the experimental data available are sparse and particularly when a prediction of material behaviour is necessary at specific pore fluid pressure and depth conditions.  相似文献   

Regional structural controls of gold mineralisation,Bendigo and Castlemaine goldfields,Central Victoria,Australia     

Clive E. Willman 《Mineralium Deposita》2007,42(5):449-463

The Bendigo and Castlemaine goldfields are classic examples of structurally controlled orogenic gold deposits in the Bendigo Zone of central Victoria, SE Australia. Detailed mapping and biostratigraphic interpretation has led to a better understanding of the regional structural controls of this type of gold-quartz mineralisation. Mineralised quartz veins are hosted by the Castlemaine Group, an Early-to-Middle Ordovician turbidite succession at least 3,000 m thick. Gold deposits are controlled by low-displacement faults that are clustered into several belts (the goldfields) indicating a regional structural control. The timing of mineralisation overlapped with that of the major period of deformation including folding, cleavage development and regional faulting. The Bendigo and Castlemaine goldfields are located in an area termed the Whitelaw thrust sheet bounded by two unmineralised, high-displacement, regional-scale faults. Mapping has revealed an interrelationship between the regional-scale faults, regional structural style and goldfield location. The goldfields lie immediately west of the boundary between the upper and lower portions of the thrust sheet and are characterised by symmetric folds with sub-horizontal to synclinal enveloping surfaces, relatively low co-axial strains and moderate cleavage development. The non-gold-bearing areas immediately east of each goldfield correspond with the lower part of the Whitelaw thrust sheet and are characterised by higher non-coaxial strains, stronger cleavage and folds with wide west-dipping limbs giving rise to easterly vergent sections and steeply west-dipping enveloping surfaces. That mineralisation was an integral part of the thin-skinned style of deformation in the central Bendigo Zone is indicated by timing relationships and the interrelationship between local-scale mineralised structures and regional-scale features such as large-displacement unmineralised faults, regional variations in fold style and overall thrust sheet geometry. The work supports previous models that suggest mineralised fluids were focussed along a linked system of deep-seated faults. The primary conduits may have been major regional-scale ‘intrazone’ faults, which are inferred to sole into detachments near the base of the Castlemaine Group. It is proposed that these structures linked with minor intrazone faults and then with networks of low-displacement mineralised faults that were strongly controlled by folds. The location of minor intrazone faults was probably controlled by internal thrust sheet geometry. The distribution of gold deposits and of gold production suggests that maximum fluid flow was concentrated along the eastern margins of networks of low-displacement faults.  相似文献   

Large magnitude silicic volcanism in north Afar: the Nabro Volcanic Range and Ma’alalta volcano     

Pierre Wiart  Clive Oppenheimer 《Bulletin of Volcanology》2005,67(2):99-115

  相似文献   

Petrology and geochemistry of LaPaz Icefield 02205: A new unique low-Ti mare-basalt meteorite     

Mahesh Anand  Lawrence A. Taylor  Clive R. Neal  Shiho Tanikawa 《Geochimica et cosmochimica acta》2006,70(1):246-264

LaPaz Icefield 02205 (LAP 02205) is a new low-Ti mare-basalt meteorite that was discovered in the LaPaz Ice Field in Antarctica. This is the first crystalline lunar basalt in the US Antarctic collection and the only 5th unbrecciated mare-basalt meteorite to be discovered to date. The rock has a typical basaltic texture with tabular and elongated pyroxene and plagioclase crystals, and minor olivine grains commonly rimmed by pyroxenes. Core- to rim-zoning in terms of Fe and Mg is present in almost all pyroxene grains. Accessory minerals include ilmenite, chromite, ulvöspinel, troilite, and FeNi metal. This rock is highly enriched in late-stage mesostasis. Free silica is also abundant. In terms of texture and mineralogy, LAP 02205 displays features of low-Ti mare basalts, with similarities to some low-Ti Apollo 12 and Apollo 15 basalts. Whole-rock major- and trace-element compositions confirm the highly fractionated nature of this basalt. The whole-rock REE contents of the meteorite are the highest among all known low-Ti mare basalts. The platinum group element (PGE) contents in LAP are also enriched suggesting the possibility of endogenously enriched source regions or the PGEs generally behaved as incompatible elements during crystal fractionation under low fO₂ conditions. Trace-element contents of mineral grains in LAP 02205 display wide variations, suggesting extensive non-equilibrium crystallization. The REE concentrations in the earliest-formed minerals provide constraints on the composition of the parental liquid, which is similar to the measured whole-rock composition. Crystallization modeling of the LAP 02205 bulk composition yields a reasonable fit between predicted and observed mineral phases and compositions, except for the high-Mg olivine cores, which are observed in the rock but not predicted by the modeling. An isochron age of 2929 ± 150 Ma for phosphate minerals makes this rock one of the youngest lunar basalts known to date. The young age and specific geochemical characteristics of LAP distinguish it from those of most other low-Ti mare basalts. However, the low-Ti mare basalt meteorite, NWA 032, has a similar young age, and the two meteorites also appear to be closely related from some geochemical perspectives and might have originated from similar source regions on the Moon.  相似文献   

Graphical methods for rapid vector analysis of demagnetization data     

Clive A. Foss 《Geophysical Journal International》1981,65(1):217-221

Summary. Working graphs are presented which, when used in conjunction with a stereographic projection, enable (a) magnitude and direction of the difference between two vectors to be estimated, and (b) a vector to be resolved into two or three components of prescribed directions. Applications of the methods to multicomponent natural remanent magnetizations are illustrated.  相似文献