Tidal simulation revisited     

Huang  Wei  Zhang  Y. Joseph  Wang  Zhengui  Ye  Fei  Moghimi  Saeed  Myers  Edward  Yu  Haocheng 《Ocean Dynamics》2022,72(3):187-205

Ocean Dynamics - Accurate representation of tides is a pre-requisite for simulating many complex coastal processes. This study examines several most important factors for rigorous validation of...  相似文献   

Investigation of RS and GIS techniques on MPSIAC model to estimate soil erosion     

Hamed Noori  Hojat Karami  Saeed Farzin  Seyed Mostafa Siadatmousavi  Barat Mojaradi  Ozgur Kisi 《Natural Hazards》2018,91(1):221-238

Soil erosion due to surface water is a standout among the serious threat land degradation problem and an hazard environmental destruction. The first stage for every kind of soil conservation planning is recognition of soil erosion status. In this research, the usability of two new techniques remote sensing and geographical information system was assessed to estimate the average annual specific sediments production and the intensity erosion map at two sub-basins of DEZ watershed, southwest of Lorestan Province, Iran, namely Absorkh and Keshvar sub-basins with 19,920 ha, using Modified Pacific Southwest Inter-Agency Committee (MPSIAC) soil erosion model. At the stage of imagery data processing of IRS-P6 satellite, the result showed that an overall accuracy and kappa coefficient were 90.3% and 0.901, respectively, which were considered acceptable or good for imagery data. According to our investigation, the study area can be categorized into three level of severity of erosion: moderate, high, and very high erosion zones. The amount of specific sediments and soil erosion predicted by MPSIAC model was 1374.656 and 2396.574 m³ km^?2 year^?1, respectively. The areas situated at the center and south parts of the watershed were subjected to significant erosion because of the geology formation and ground cover, while the area at the north parts was relatively less eroded due to intensive land cover. Based on effective of nine factors, the driving factors from high to low impact included: Topography > Land use > Upland erosion > Channel erosion > Climate > Ground cover > Soil > Runoff > Surface geology. The measured sediment yield of the watershed in the hydrometric station (Keshvar station) was approximately 2223.178 m³ km^?2 year^?1 and comparison of the amount of total sediment yield predicted by model with the measured sediment yield indicated that the MPSIAC model 38% underestimated the observed value of the watershed.  相似文献   

Biomarker analysis of the upper Jurassic Naokelekan and Barsarin formations in the Miran Well-2, Miran oil field,Kurdistan region,Iraq     

Ibrahim M. J. Mohialdeen  Karwan A. Mustafa  Danyar A. Salih  Mark A. Sephton  Diyar A. Saeed 《Arabian Journal of Geosciences》2018,11(3):51

The Miran oilfield is one of the new oil fields in Kurdistan region, northern Iraq, located in the Sulaimani Governorate. Twelve Cuttings samples from the Upper Jurassic Naokelekan and Barsarin formations in well Miran-2 were selected for detailed organic geochemical investigations. All the samples were subjected to bitumen extraction in order to study any biomarkers present using gas chromatography-mass spectrometry. The dominance of low-molecular-weight n-alkanes and other calculated parameters indicate a marine source for the organic matter derived from planktonic algal and bacterial precursors deposited under anoxic conditions. The isoprenoids/n-alkanes ratios indicate type II and mixed II/III kerogen for both formations. The type II/III kerogen is characteristic of transitional environment under anoxic to dysoxic conditions as also indicated by the homohopane index for studied samples. More argillaceous carbonate rocks were deposited when reducing conditions were prevalent. Medium to high gammacerane index values in the rock extracts probably indicate a stratified water column during deposition of both formations. The studied samples from both formations have entered peak oil window maturity as reflected from the biomarker ratios from both aliphatic and aromatic fractions of the extracts.  相似文献   

Application of GAINS model for assessing selected air pollutants in Khyber Pakhtunkhwa and Balochistan,Pakistan     

Aisha Khan  Sheikh Saeed Ahmad 《Arabian Journal of Geosciences》2018,11(9):217

Pakistan is a developing country existing geographically at a pivoted location between two of the world’s largest pollution emitting countries (China and India) which adds to the severity of environmental issues faced by the country. These concerns include air pollution, climate change, and extreme weather situations prevailing in Pakistan. This increasing air pollution is deteriorating the health, threatening the food security and adding up its share to the already existing global warming. The initial step in devising a wide ranging, multifaceted, economically feasible, and sustainable solution to deal with the severity of this issue is the quantification of the air pollution and greenhouse gas emission in Pakistan. The GAINS model is one of the most comprehensive tools, dealing with the air pollutants and greenhouse gases covered by the Kyoto Protocol. This study has utilized this model to analyze the source-based anthropogenic emissions of air pollutants (NH₃ and SO₂), volatile organic compounds (VOCs), and greenhouse gases (CH₄ and CO₂), their impacts and abatement cost, for the duration of 1990–2030, in the Khyber Pakhtunkhwa and Balochistan regions of Pakistan. An overall increasing trend was observed during 1990–2030 for (a) air pollutants: NH₃ (223.52–568.87kT/Y); SO₂ (50.52–332.95kT/Y), (b) VOCs (121.76–246.81kT/Y), and (c) greenhouse gases: CO₂ (7.83–62.45MT/Y) and CH₄ (1120-2314kT/Y). The emission inventories created for all greenhouse gases together estimated the increase of 42.37 to 138.57 MTCO₂eq. for greenhouse gases over the time duration of 1990–2030.  相似文献   

Correction to: New climatic zones in Iran: a comparative study of different empirical methods and clustering technique     

Abbasi  Faezeh  Bazgeer  Saeed  Kalehbasti  Parviz Rezazadeh  Oskoue  Ebrahim Asadi  Haghighat  Masoud  Kalehbasti  Pouya Rezazadeh 《Theoretical and Applied Climatology》2022,147(1-2):63-63

Theoretical and Applied Climatology -  相似文献   

Proposed algorithm for optimization of directional additional exploratory drill holes and computer coding   总被引：2，自引：1，他引：1  

Saeed Soltani  Ardeshir Hezarkhani 《Arabian Journal of Geosciences》2013,6(2):455-462

Block model estimated based on the drill hole information gathered during exploration stage is not appropriate for short- and medium-term mine planning. Additional information prior to mining is required for various purposes, that the source of this information is drill holes. In most situations, reducing the overall uncertainty on the estimation is the major objective of additional drilling and collecting samples from them. The topic of selecting the optimum location for additional exploratory drill holes has been of interest to mining engineers and geostatisticians in the second half of last century, but all of them are not able to optimize directional drill holes because they are based on the 2D space and do not consider the 3D extension of drill holes and block model. This study introduces a methodology to optimize the dip and location of additional exploratory drill holes based on the defined objective function with considering 3D extension of ore body and drill holes. Direct search simulated annealing used that is efficient and robust method for solving the nonlinear unconstrained global optimization problems. This method is very useful in the case that drilling the drill holes with different dips has been obligated due to topography condition and ore body situation. A case study in gold resource illustrates the method.  相似文献   

Biodegradation of phenol from a synthetic aqueous system using acclimatized activated sludge     

Haniyeh Jalayeri  Faramarz Doulati Ardejani  Reza Marandi  Saeed Rafiee pur 《Arabian Journal of Geosciences》2013,6(10):3847-3852

Phenol is one of the aromatic hydrocarbons. Phenol and its derivatives are highly toxic. These pollutants can be observed in the effluents of many industries. This research investigates the removal of phenol by the use of activated sludge in a batch system. The effects of influencing factors on biodegradation efficiency have been evaluated. The main factors considered in this study were the volume of acclimatized activated sludge inoculation, pH, temperature, and initial concentration of phenol. The inoculation volumes of 1, 3, and 5 mL of acclimatized activated sludge were taken into account. Different pH values of 3, 5, 7, 9, and 11 were examined. The experiments were conducted for temperatures of 25, 30, 35, and 40 °C and initial phenol concentrations of 400, 800, 1,000, and 1,500 ppm. The results show that the acclimatized activated sludge has a high capacity for the removal of phenol. From a 100-mL aqueous solution was removed 1,500 ppm of phenol after 80 h. Furthermore, maximum phenol removal was observed for an inoculation volume of 5 mL for three different phenol concentrations of 100, 400, and 800 ppm. The best pH was 7 for the biodegradation process, and the optimum temperature was 30 °C. It was further found that an increase in the phenol concentration increased its removal time. Moreover, the activated sludge could effectively remove about 99.9 % of phenol from a synthetic aqueous solution in a batch system.  相似文献   

Ascribing soil erosion types for sediment yield using composite fingerprinting technique     

Seyed Hamidreza Sadeghi  Saeed Najafi  Alireza Riyahi Bakhtiari  Parviz Abdi 《水文科学杂志》2013,58(9):1753-1762

Abstract

Soil erosion and eroded sediment are serious threats to sound land management. However, less attention has been given to quantifying the importance of different soil erosion features based on appropriate control measures that could be designated. Accordingly, this research was planned to quantify the contribution of potential sediment sources, i.e. sheet, rill and gully erosion, in Idelo watershed in Zanjan Province, Iran, using composite fingerprinting. Toward this aim, 16 geochemical and organic tracers were detected in sediment sources and sediment deposited at the outlet. The results of applying the composite fingerprinting technique, with a relative error of 16%, showed that sheet, rill and gully sources contributed 56%, 44% and 0%, respectively, to sediment yield. It was also apparent from the results that the composite fingerprinting approach could be successfully utilized to assess the provenance of sediment deposited at the main outlet of the study watershed by soil erosion type.

Editor Z.W. Kundzewicz  相似文献   

Analysis of recharge conceptualization in inverse groundwater modelling     

Majid Ehtiat  Saeed A. Vaghefi  Abbas Ghaheri 《水文科学杂志》2013,58(15):2789-2801

ABSTRACT

This study presents a systematic illustration quantifying how misleading the calibration results of a groundwater simulation model can be when recharge rates are considered as the model parameters to be estimated by inverse modelling. Three approaches to recharge estimation are compared: autocalibration (Model 1), the empirical return coefficient method (Model 2), and distributed hydrological modelling using the Soil and Water Assessment Tool, SWAT (Model 3). The methodology was applied in the Dehloran Plain, western Iran, using the MODFLOW modular flow simulator and the PEST method for autocalibration. The results indicate that, although Model 1 performed the best in simulating water levels at observation wells in the calibration stage, it did not perform satisfactorily in real future scenarios. Model 3, with SWAT-based recharge rates, performed better than the other models in the validation stage. By not evaluating the model performance solely on calibration results, we demonstrate the relative significance of using more accurate recharge estimates when calibrating groundwater simulation models.