Metamorphic Environments around the Cretaceous Kurihashi Pluton in the Kitakami Mountains, NE Japan: in Comparison to the Ganidake Pluton - Kamaishi Skarn Metasomatism     

Kazuhiro Sasaki    Kazuo Nakashima  Satoshi Kanisawa 《Resource Geology》2005,55(2):111-122

Abstract. Many granitic plutons of Early Cretaceous age are intruded on various scales in the Kitakami Mountains. The stock‐type Ganidake pluton accompanies enormous Fe‐Cu mineralization of the Kamaishi deposits, whereas the Kurihashi pluton accompanies less mineralization. To elucidate the cause of these differences, the metamorphic conditions and redox state of the contact metamorphic aureole around the Kurihashi pluton have been examined by the petrochemical study and gas analysis of the metamorphic rocks. A typical mineral assemblage in the pelitic rocks in the lowest‐grade part is biotite‐muscovite‐chlorite‐quartz‐plagio‐clase‐graphite, which occur more than 2 km away from the contact point with the Kurihashi pluton. Graphite disappears at the 1550 m point, and cordierite and garnet appear in the middle and highest‐grade parts, respectively. A typical mineral assemblage in the tuffaceous rocks in the lower‐grade part is chlorite‐actinolite‐biotite‐quartz‐plagioclase. Actinolite changes into hornblende near to the pluton. The CO₂/CH₄ ratios obtained in measurements by gas chromatography exceeds 100 in the pelitic rocks at the contact point with the pluton. The ratios decrease and become less than 0.1 with distance from the pluton. Equilibrium temperatures calculated from a garnet‐biotite pair in the pelitic rock and a hornblende‐plagioclase pair in the tuffaceous rock are 640d? and 681 d?C at the contact point, respectively. The log?o₂ values among these metamorphic aureoles estimated from the CO₂/CH₄ ratios are slightly lower than the FMQ‐buffer. Redox states of the contact metamorphic aureole are kept in an intermediate condition between oxidized magma of the Kurihashi pluton and graphite‐bearing pelitic country rocks. Judging from these metamorphic conditions around the Kurihashi pluton and from the re‐evaluation of the previous knowledge about contact metasomatism around the Ganidake pluton, the Kurihashi metamorphism has occurred at higher temperatures and dry conditions than the Ganidake metasomatism. These differences in the metamorphic conditions and presence or absence of a large limestone mass around the pluton might be the principal reasons why the Kurihashi pluton accompanies less mineralization and the Ganidake pluton accompanies gigantic Kamaishi skarn mineralization.  相似文献   

Temporal change of interplate coupling in northeastern Japan during 1995–2002 estimated from continuous GPS observations     

Takuya Nishimura  Tomowo Hirasawa  Shin'ichi Miyazaki  Takeshi Sagiya  Takashi Tada  Satoshi Miura  Kazuo Tanaka 《Geophysical Journal International》2004,157(2):901-916

  相似文献   

Accuracy assessment of QuickBird stereo imagery   总被引：2，自引：0，他引：2  

Mayumi Noguchi  Clive S. Fraser  Takayuki Nakamura  Takahiro  Shimono  Shoichi Oki 《The Photogrammetric Record》2004,19(106):128-137

The Geographical Survey Institute of Japan has recently carried out an evaluation of the metric performance of QuickBird stereo satellite imagery. This paper describes the accuracy assessment of the sensor orientation and geopositioning phases of the study, the aim of which was twofold. First, it was desired to confirm the metric potential of QuickBird imagery for 1:25 000 scale topographic mapping. Second, a determination was to be made of the accuracy attainable from the Basic image product. The techniques of rational functions and affine bundle adjustment were employed, the former with bias compensation. The results obtained both reassert the high precision of the rational functions approach and cast doubt upon the applicability of the 3D affine model for accurate geopositioning from QuickBird imagery.  相似文献   

Radiation-induced decomposition of U(VI) phases to nanocrystals of UO₂     

Satoshi Utsunomiya  Lu-Min Wang 《Earth and Planetary Science Letters》2005,240(2):521-528

U⁶⁺-phases are common alteration products, under oxidizing conditions, of uraninite and the UO₂ in spent nuclear fuel. These U⁶⁺-phases are subjected to a radiation field caused by the α-decay of U, or in the case of spent nuclear fuel, incorporated actinides, such as ²³⁹Pu and ²³⁷Np. In order to evaluate the effects of α-decay events on the stability of the U⁶⁺-phases, we report, for the first time, the results of ion beam irradiations (1.0 MeV Kr²⁺) of U⁶⁺-phases. The heavy-particle irradiations are used to simulate the ballistic interactions of the recoil-nucleus of an α-decay event with the surrounding structure. The Kr²⁺-irradiation decomposed the U⁶⁺-phases to UO₂ nanocrystals at doses as low as 0.006 displacements per atom (dpa). U⁶⁺-phases accumulate substantial radiation doses (∼1.0 displacement per atom) within 100,000 yr if the concentration of incorporated ²³⁹Pu is as high as 1 wt.%. Similar nanocrystals of UO₂ were observed in samples from the natural fission reactors at Oklo, Gabon. Multiple cycles of radiation-induced decomposition to UO₂ followed by alteration to U⁶⁺-phases provide a mechanism for the remobilization of incorporated radionuclides.  相似文献   

Energy dissipation behaviour of shear panels made of low yield steel     

Masayoshi Nakashima  Satoshi Iwai  Mamoru Iwata  Toru Takeuchi  Shinzo Konomi  Takashi Akazawa  Kazuhiro Saburi 《地震工程与结构动力学》1994,23(12):1299-1313

This paper presents the results of a pilot test conducted for evaluating the energy dissipation behaviour of shear panels made of low yield steel whose 0.2 per cent offset yield stress is 120 MPa. A total of six full-scale shear panels were tested with the loading condition, stiffener spacing, and magnitude of axial force as test variables. The shear panels tested yielded at a shear force that is approximately 1/3 of the yield shear force of equivalent shear panels made of common mild steel. Shear panels with proper stiffener arrangement exhibited stable hysteresis, thus ensuring large energy dissipation capacity. Sufficient strain hardening was observed in the shear panels tested, with their energy dissipation capacity about 1.5 times larger than that of an equivalent linear-elastic and perfect-plastic system. Plate buckling did not lead the shear panels to immediate degradation in their energy dissipation capacity. Post-buckling resistance was found to be a subject that requires further studies for quantifying the performance of shear panels made of low yield stress steel as hysteretic dampers.  相似文献   

Slope instability phenomena in permafrost regions of Qinghai-Tibet Plateau, China   总被引：1，自引：2，他引：1  

Ma Wei  Niu Fujun  Akagawa Satoshi  Jin Dewu 《Landslides》2006,3(3):260-264

Permafrost covers a significant area of the Qinghai-Tibet Plateau. Slope instability problem in the region was often neglected, though it plays important roles in engineering construction and landform processes. In this paper, the slope instability phenomena in the permafrost regions on the plateau are discussed. The slope failures often occur in the forms of thaw-induced landslides and gelifluction. Thaw-induced landslides are closely related to active layer detachment and changes of permafrost conditions. Such landslides include retrogressive flow and thaw slump and are hazardous to engineering constructions. Gelifluction includes deep-seated movement and surface movement. It is an important factor in landform planation because it may spread over a large area and remain active for a long period of time.  相似文献   

Trace Element Analysis of Fused Whole-Rock Glasses by Laser Ablation-ICP-MS and PIXE     

Masanori Kurosawa  Kunihiro Shima  Satoshi Ishii  Kimikazu Sasa 《Geostandards and Geoanalytical Research》2006,30(1):17-30

The concentrations of fifty trace elements, including relatively volatile elements and transition metal elements, in fused glasses of Geological Survey of Japan rock reference materials GSJ JR-2, JA-1, JA-2, JB-1a, JB-3, JGb-1 and JF-1 were determined by particle (proton) induced X-ray emission (PIXE) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). The fused glasses were prepared by rapid fusion and subsequent quenching in welded platinum capsules and were found to be homogeneous for major elements and for trace elements with concentrations of more than 1 μg g^-1 within the observed precision (± 10% mean) on a 70 μm sampling scale. The values obtained by PIXE and LA-ICP-MS for the transition elements (Cr, Mn, Fe, Ni and Cu), the relatively volatile elements (Zn, Ga, Rb and Pb) and the refractory elements (Y, Zr, Nb and Th) with concentrations greater than a few μg g^-1 showed good agreement (within 10 % relative difference). The values for almost all the elements detected at concentrations higher than 1 μg g^-1 as determined by LA-ICP-MS also agreed well with the reference values (mean relative difference < ± 10%), except for B and Cu. The good agreement confirmed the appropriateness of the NIST SRM 600 series glass calibration reference material for LA-ICP-MS analysis of glasses with variable major-element compositions for almost all elements. The concentrations of Cu in all the samples were lower than the reference values, which was attributed to adsorption of the transition metals onto the platinum capsule during preparation.  相似文献   

Crystallization of microlites and degassing during magma ascent: Constraints on the fluid mechanical behavior of magma during the Tenjo Eruption on Kozu Island, Japan   总被引：1，自引：0，他引：1  

Satoshi Noguchi  Atsushi Toramaru  Taketo Shimano 《Bulletin of Volcanology》2006,68(5):432-449

Bubble and crystal textures provide information with regard to the kinetics of the vesiculation and crystallization processes. They also provide insights into the fluid mechanical behavior of magma in a conduit. We performed textural (bubble and crystal) and compositional analyses of pyroclasts that were obtained from the Tenjo pyroclastic flow, which resulted on account of the eruption in 838 A.D. on Kozu Island, about 200 km south of Tokyo, Japan. Pyroclasts in one flow unit (300∼2,060 kg/m³; average density 1330 kg/m³) can be classified into three types on the basis of vesicle textures. Type I pyroclasts have small isolated spherical bubbles with higher vesicularities (67–77 vol.%) and number density (10.8–11.7 log m⁻³). Type II pyroclasts have vesicularities similar to type I (61–69 vol.%), but most bubbles exhibit evidences of bubble coalescence, and lower number densities than type I (8.9–9.5 log m⁻³). Type III pyroclasts contain highly deformed bubbles with lower vesicularities (16–34 vol.%) and number densities (8.2–9.0 log m⁻³). The microlite volume fraction (DRE converted) also changes consistently across type I, type II, and type III as 0.06, 0.08, and 0.10–0.15, respectively. However, the number density of the microlites remains nearly invariant in all the pyroclast types. These facts indicate that the variation in the microlite volume fraction is controlled not by the number density (i.e., nucleation process), but by the size (i.e., growth process); the growth history of each type of microlite was different. Water content determinations show that the three types of pumices have similar H₂O contents (2.6±0.2 wt%). This fact implies that all three types were quenched at nearly the same depth (35±5 MPa, assuming that the magma was water-saturated) in the conduit. If the crystal sizes are limited only by growth time, a variation in this parameter can be related to the residence time, which is attributed to the flow heterogeneity in the conduit. By assuming a laminar Poiseuille-type flow, these textural observations can be explained by the difference in ascent velocity and shearing motion across the conduit, which in turn results in the differences in growth times of crystals, degrees of deformation, and bubble coalescence. Consequently, for crystals in the inner part of the conduit, the crystal growth time from nucleation to quenching is shorter than that near the conduit wall. The vesicle texture variation of bubbles in types I, II, and III results from the difference in the deformation history, implying that the effect of degassing occurred primarily towards the conduit wall.  相似文献   

Persistence of road runoff generation in a logged catchment in Peninsular Malaysia     

Alan D. Ziegler  Junjiro N. Negishi  Roy C. Sidle  Takashi Gomi  Shoji Noguchi  Abdul Rahim Nik 《地球表面变化过程与地形》2007,32(13):1947-1970

Measurements of saturated hydraulic conductivity (K_s) and diagnostic model simulations show that all types of logging road/trail in the 14·4 ha Bukit Tarek Experimental Catchment 3 (BTEC3) generate substantial Horton overland flow (HOF) during most storms, regardless of design and level of trafficking. Near‐surface K_s(0–0·05 m) on the main logging road, skid trails and newly constructed logging terraces was less than 1, 2 and 34 mm h^?1, respectively. Near‐surface K_s on an abandoned skid trail in an adjacent basin was higher (62 mm h^?1), owing to the development of a thin organic‐rich layer on the running surface over the past 40 years. Saturated hydraulic conductivity measured at 0·25 m below the surface of all roads was not different (all <6 mm h^?1) and corresponded to the K_s of the adjacent hillslope subsoil, as most roads were excavated into the regolith more than 0·5–1 m. After 40 years, only limited recovery in near‐surface K_s occurred on the abandoned skid trail. This road generated HOF after the storage capacity of the upper near‐surface layer was exceeded during events larger than about 20 mm. Thus, excavation into low‐K_s substrate had a greater influence on the persistence of surface runoff production than did surface compaction by machinery during construction and subsequent use during logging operations. Overland flow on BTEC3 roads was also augmented by the interception of shallow subsurface flow traveling along the soil–saprolite/bedrock interface and return flow emerging from the cutbank through shallow biogenic pipes. The most feasible strategy for reducing long‐term road‐related impacts in BTEC3 is limiting the depth of excavation and designing a more efficient road network, including minimizing the length and connectivity of roads and skid trails. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Age characteristics of walleye pollock school echoes     

Kang  Myounghee; Honda  Satoshi; Oshima  Tatsuki 《ICES Journal of Marine Science》2006,63(8):1465-1476

  相似文献