Strain and tilt changes measured during a water injection experiment at the Nojima Fault zone, Japan   总被引：2，自引：0，他引：2  

Kunio Fujimori  Hiroshi Ishii  Atsushi Mukai  Shigeru Nakao  Shigeo Matsumoto  Yasuhiro Hirata 《Island Arc》2001,10(3-4):228-234

Abstract In order to make geophysical and geological investigations of the Nojima Fault on Awaji Island, Japan, three boreholes measuring 1800 m, 800 m and 500 m deep were drilled into the fault zone. The fault is one of the seismic source faults of the 1995 Hyogo-ken Nanbu earthquake of M 7.2. A new multicomponent borehole instrument was installed at the bottom of the 800 m borehole and continuous observations of crustal strain and tilt have been made using this instrument since May 1996. A high-pressure water injection experiment within the 1800 m borehole was done in February and March 1997 to study the geophysical response, behavior, permeability, and other aspects of the fault zone. The injection site was located approximately 140 m horizontally and 800 m vertically from the instrument. Associated with the water injection, contraction of approximately 0.7 × 10⁻⁷ str (almost parallel to the fault) and tilt of approximately 1 × 10^-7 rad in the sense of upheaval toward the injection site were observed. In addition to these controlled experiments, the strainmeter and tiltmeter also recorded daily variations. We interpret strain and tilt changes to be related to groundwater discharge and increased ultra-micro seismicity induced by the injected water.  相似文献   

The use of sintered diamond anvils in the MA8 type high-pressure apparatus     

Tadashi Kondo  Hiroshi Sawamoto  Akira Yoneda  Manabu Kato  Akihito Matsumuro  Takehiko Yagi  Takumi Kikegawa 《Pure and Applied Geophysics》1993,141(2-4):601-611

A new multi-anvil type high-presure apparatus has been developed using sintered diamond anvils to generate pressures over 30 GPa and temperatures up to about 2000°C. A maximum sample volume of about 1 mm³ is available in this system. The pressure was confirmed by dissociation of forsterite into Mg-perovskite and periclase. The basic techniques and problems in utilizing sintered diamond in the MA8 type high-pressure apparatus are discussed with an emphasis on the future prospect of incorporating simultancous X-ray diffraction observation.  相似文献   

Convective instability and overstability in the sunspot umbra     

Mamoru Saitō  Shoji Kato 《Solar physics》1968,3(4):531-542

Convective instability and overstability of a plane-parallel medium in the presence of a uniform vertical magnetic field is studied. We take into account both the effect of penetration of disturbances into sub-adiabatically stratified semi-infinite upper and lower layers, and the effect of thermal damping of disturbances introduced by the compressibility of the medium. If the degree of super-adiabaticity in temperature stratification in the middle layer is relatively large compared with that of sub-adiabaticity in the upper and lower layers, the range of physical conditions in which overstable convection occurs is very narrow. However, if it is not the case the range is rather wide. In the normal sunspot umbra, only disturbances with selected sizes in vertical dimension will be able to become overstable. The overstable convection might be a cause of some dynamical features (such as dots) in the sunspot umbra, but will not be the main contributor for transporting mechanical energy in the sunspot region.  相似文献   

Evolution of Planetesimal Velocities Based on Three-Body Orbital Integrations and Growth of Protoplanets     

Keiji OhtsukiGlen R. Stewart  Shigeru Ida 《Icarus》2002,155(2):436-453

We obtain the viscous stirring and dynamical friction rates of planetesimals with a Rayleigh distribution of eccentricities and inclinations, using three-body orbital integration and the procedure described by Ohtsuki (1999, Icarus137, 152), who evaluated these rates for ring particles. We find that these rates based on orbital integrations agree quite well with the analytic results of Stewart and Ida (2000, Icarus 143, 28) in high-velocity cases. In low-velocity cases where Kepler shear dominates the relative velocity, however, the three-body calculations show significant deviation from the formulas of Stewart and Ida, who did not investigate the rates for low velocities in detail but just presented a simple interpolation formula between their high-velocity formula and the numerical results for circular orbits. We calculate evolution of root mean square eccentricities and inclinations using the above stirring rates based on orbital integrations, and find excellent agreement with N-body simulations for both one- and two-component systems, even in the low-velocity cases. We derive semi-analytic formulas for the stirring and dynamical friction rates based on our numerical results, and confirm that they reproduce the results of N-body simulations with sufficient accuracy. Using these formulas, we calculate equilibrium velocities of planetesimals with given size distributions. At a stage before the onset of runaway growth of large bodies, the velocity distribution calculated by our new formulas are found to agree quite well with those obtained by using the formulas of Stewart and Ida or Wetherill and Stewart (1993, Icarus106, 190). However, at later stages, we find that the inclinations of small collisional fragments calculated by our new formulas can be much smaller than those calculated by the previously obtained formulas, so that they are more easily accreted by larger bodies in our case. The results essentially support the previous results such as runaway growth of protoplanets, but they could enhance their growth rate by 10-30% after early runaway growth, where those fragments with low random velocities can significantly contribute to rapid growth of runaway bodies.  相似文献   

A Model for the Quiescent Phase of the Recurrent Nova U Scorpii     

Hachisu I  Kato M  Kato T  Matsumoto K  Nomoto K 《The Astrophysical journal》2000,534(2):L189-L192

A theoretical light curve is constructed for the quiescent phase of the recurrent nova U Scorpii in order to resolve the existing distance discrepancy between the outbursts (d approximately 6 kpc) and the quiescences (d approximately 14 kpc). Our U Sco model consists of a very massive white dwarf (WD), an accretion disk (ACDK) with a flaring-up rim, and a lobe-filling, slightly evolved, main-sequence star (MS). The model properly includes an accretion luminosity of the WD, a viscous luminosity of the ACDK, and a reflection effect of the MS and the ACDK irradiated by the WD photosphere. The B light curve is well reproduced by a model of 1.37 M middle dot in circle WD + 1.5 M middle dot in circle MS (0.8-2.0 M middle dot in circle MS is acceptable) with an ACDK having a flaring-up rim and the inclination angle of the orbit i approximately 80&j0;. The calculated color is rather blue (B-V approximately 0.0) for a suggested mass accretion rate of 2.5x10-7 M middle dot in circle yr-1, thus indicating a large color excess of E(B-V) approximately 0.56 with the observational color of B-V=0.56 in quiescence. Such a large color excess corresponds to an absorption of AV approximately 1.8 and AB approximately 2.3, which reduces the distance to 6-8 kpc. This is in good agreement with the distance estimation of 4-6 kpc for the latest outburst. Such a large intrinsic absorption is very consistent with the recently detected period change of U Sco, which is indicating a mass outflow of approximately 3x10-7 M middle dot in circle yr-1 through the outer Lagrangian points in quiescence.  相似文献   

Wide-Field Camera for Gravitational Microlensing Survey: MOA-cam2     

Toshifumi Yanagisawa  Yasushi Muraki  Yutaka Matsubara  Fumio Abe  Kimiaki Masuda  Sachiyo Noda  Takahiro Sumi  Yuji Kato  Mitsuaki Fujimoto  Shuji Sato  Ian Bond  Nicholas Rattenbury  Philip Yock  Pam Kilmartin  John Hearnshaw  Micheal Reid  Denis Sullivan  Brian Carter  Richard Dodd  Garry Nankivell  Noiman Rumsey  Morihiro Honda  Maki Sekiguchi  Masanori Yoshizawa  Takashi Nakamura  Humitaka Sato  Seiji Kabe  Makoto Kobayashi  Yoshiyuki Watase  Jun Jugaku  Toshiharu Saito  Barbel Koribalsky 《Experimental Astronomy》2000,10(4):519-535

We have constructed a large, mosaic CCD camera called MOA-cam2 which has 4096 × 6144-pixelsto search for gravitational microlensing events. MOA-cam2 has three4096 × 2048-pixel SITe CCD chips, which have a very high quantum efficiency (nearly 80% in the wave region 500 to 800 nm),and three buttable sides. We have placed the threechips side by side with 100 m dead space. MOA-cam2 has been installed on the 61 cm Boller and Chivens telescope of the MOA collaboration at the Mt. John University Observatory (MJUO) in NewZealand since July 1998. The field coverage is 0.92° × 1.38° per exposure. The technical details of MOA-cam2 and the first images obtained with the Boller and Chivens telescope are presented. MOA-cam2 introduces a second phase of research on gravitational microlensing by the MOA collaboration.  相似文献   

Preparation of Two New GSJ Geochemical Reference Materials: Basalt JB-1b and Coal Fly Ash JCFA-1   总被引：1，自引：0，他引：1  

Shigeru Terashima  Masahiro Taniguchi  Masumi Mikoshiba  Noboru Imai 《Geostandards and Geoanalytical Research》1998,22(1):113-117

  相似文献   

Jointing of two tunnel shields using artificial underground freezing     

Tsutomu Takashi  Shiro Kiriyama  Tetsuji Kato 《Engineering Geology》1979,13(1-4):519-529

Freezing was used in the jointing section of two shields (diameter 3.14 m) which ran across at right angles and at 25-m depth under the crossing of main roads for the construction of a 2.4-m diameter sewer tunnel. The object of freezing was to create a frozen barrier to prevent the inflow of water and fine sand into the area to be excavated.

Thirty-five freeze pipes (length about 7 m) were placed from one shield conically in the direction of the flank of another shield with freeze pipes attached to its inside wall. The cooling unit was placed on unoccupied land at about 60 m distant from the jointing section and the freeze pipes were connected with the cooling unit by supply and return pipelines.

The cooling unit had a cooling capacity of 79,000 kcal/h at an evaporation temperature of −27°C and a condensation temperature of +40°C. Freezing was continued for 180 days and the CaCl₂ brine temperature was −25 to −30°C. These works were accomplished without the sinking of shaft and the use of injection, in complete safety with no traffic restriction on the road surface.  相似文献   

Chemical species of copper in the river Shukunohe and the lake Ohnuma waters in Japan     

Katsuhiko Matsunaga  Masami Negishi  Shigeru Fukase  Kiyoshi Hasebe 《Geochimica et cosmochimica acta》1980,44(10):1615-1619

  相似文献   

Control performance in the horizontal plane of a fish robot withmechanical pectoral fins     

Kato  N. 《Oceanic Engineering, IEEE Journal of》2000,25(1):121-129

The mechanism of locomotion of aquatic animals can provide us with new insight into the maneuverability and stabilization of underwater robots. This paper focuses on biomimesis in the maneuvering performance of aquatic animals to develop a new device for maneuvering underwater robots. In this paper, guidance and control in the horizontal plane of a fish robot equipped with a pair of two-motor-driven mechanical pectoral fins on both sides of the robot in water currents is presented. The fish robot demonstrates high performance in terms of maneuverability in such activities as lateral swimming. The use of fuzzy control enables the fish robot to perform rendezvous and docking with an underwater post in water currents  相似文献