A realistic model for point-sources imaged on array detectors: The model and initial results     

W. J. Merline  Steve B. Howell 《Experimental Astronomy》1995,6(1-2):163-210

We have constructed a computer model for simulation of point-sources imaged on two-dimensional detectors. An attempt has been made to ensure that the model produces data that mimic real data taken with 2-D detectors. To be realistic, such simulations must include randomly generated noise of the appropriate type from all sources (e.g. source, background, and detector). The model is generic and accepts input values for parameters such as pixel size, read noise, source magnitude, and sky brightness. Point-source profiles are then generated with noise and detector characteristics added via our model. The synthetic data are output as simple integrations (onedimensional), as radial slices (two-dimensional), and as intensity-contour plots (three-dimensional). Each noise source can be turned on or off so that they can be studied separately as well as in combination to yield a realistic view of an image. This paper presents the basic properties of the model and some examples of how it can be used to simulate the effects of changing image position, image scale, signal strength, noise characteristics, and data reduction procedures.Use of the model has allowed us to confirm and quantify three points: 1) The use of traditionalsize apertures for photometry of faint point-sources adds substantial noise to the measurement which can significantly degrade the quality of the observation; 2) The number of pixels used to estimate the background is important and must be considered when estimating errors; and 3) The CCD equation normally used by the astronomical community consistently overestimates the signal-to-noise obtainable by a measurement while a revised equation, discussed here, provides a better estimator.  相似文献   

Coronal changes associated with a disappearing filament     

N. R. Sheeley Jr.  J. D. Bohlin  G. E. Brueckner  J. D. Purcell  V. E. Scherrer  R. Tousey  J. B. Smith Jr.  D. M. Speich  E. Tandberg-Hanssen  R. M. Wilson  A. C. De Loach  R. B. Hoover  J. P. Mc Guire 《Solar physics》1975,45(2):377-392

This paper describes Skylab/ATM observations of the events associated with a disappearing filament near the center of the solar disk on January 18, 1974. As the filament disappeared, the nearby coronal plasma was heated to a temperature in excess of 6 × 10⁶K. A change in the pattern of coronal emission occurred during the 11/3 hr period that the soft X-ray flux was increasing. This change seemed to consist of the formation and apparent expansion of a loop-like coronal structure which remained visible until its passage around the west limb several days later. The time history of the X-ray and microwave radio flux displayed the well-known gradual-rise-and-fall (GRF) signature, suggesting that this January 18 event may have properties characteristic of a wide class of X-ray and radio events.In pursuit of this idea, we examined other spatially-resolved Skylab/ATM observations of long-duration X-ray events to see what characteristics they may have in common. Nineteen similar long-lived SOLRAD X-ray events having either the GRF or post-burst radio classification occurred during the nine-month Skylab mission. Sixteen of these occurred during HAO/ATM coronagraph observations, and 7 of these 16 events occurred during observations with both the NRL/ATM slitless spectrograph and the MSFC-A/ATM X-ray telescope. The tabulation of these events suggests that all long-lived SOLRAD X-ray bursts involve transients in the outer corona and that at least two-thirds of the bursts involve either the eruption or major activation of a prominence. Also, these observations indicate that long-lived SOLARD events are characterized by the appearance of new loops of emission in the lower corona during the declining phase of the X-ray emission. However, sometimes these loops disappear after the X-ray event (like the post-flare loops associated with a sporadic coronal condensation), and sometimes the loops remain indefinitely (like the emission from a permanent coronal condensation).Visiting Scientist, Kitt Peak National Observatory, Tucson, Ariz. 85726, U.S.A. operated by the Association of Universities for Research in Astronomy, Inc., under contract with the National Science Foundation.Presently located at NASA/MSFC, Space Sciences Laboratory, Marshall Space Flight Center, Ala. 35812, U. S.A.  相似文献   

The effect of iron on montmorillonite stability. (I) Background and thermodynamic considerations   总被引：1，自引：0，他引：1  

James Wilson  David Savage  Masahiro Shibata 《Geochimica et cosmochimica acta》2006,70(2):306-322

It is envisaged that high-level nuclear waste (HLW) will be disposed of in underground repositories. Many proposed repository designs include steel waste canisters and bentonite backfill. Natural analogues and experimental data indicate that the montmorillonite component of the backfill could react with steel corrosion products to produce non-swelling Fe-rich phyllosilicates such as chamosite, berthierine, or Fe-rich smectite. In K-bearing systems, the alteration of montmorillonite to illite/glauconite could also be envisaged. If montmorillonite were altered to non-swelling minerals, the swelling capacity and self-healing properties of the bentonite backfill could be reduced, thereby diminishing backfill performance. The main aim of this paper was to investigate Fe-rich phyllosilicate mineral stability at the canister-backfill interface using thermodynamic modelling. Estimates of thermodynamic properties were made for Fe-rich clay minerals in order to construct approximate phase-relations for end-member/simplified mineral compositions in logarithmic activity space. Logarithmic activity diagrams (for the system Al₂O₃-FeO-Fe₂O₃-MgO-Na₂O-SiO₂-H₂O) suggest that if pore waters are supersaturated with respect to magnetite in HLW repositories, Fe(II)-rich saponite is the most likely montmorillonite alteration product (if f_O2(g) values are significantly lower than magnetite-hematite equilibrium). Therefore, the alteration of montmorillonite may not be detrimental to nuclear waste repositories that include Fe, as long as the swelling behaviour of the Fe-rich smectite produced is maintained. If f_O2(g) exceeds magnetite-hematite equilibrium, and solutions are saturated with respect to magnetite in HLW repositories, berthierine is likely to be more stable than smectite minerals. The alteration of montmorillonite to berthierine could be detrimental to the performance of HLW repositories.  相似文献   

Changes in the circulation of Tampa Bay due to Hurricane Frances as recorded by ADCP measurements and reproduced with a numerical Ocean model     

M. Wilson  S. D. Meyers  M. E. Luther 《Estuaries and Coasts》2006,29(6):914-918

Hurricane Frances is shown to greatly alter the hydrodynamics within Tampa Bay, Florida, and the exchange of water with the Gulf of Mexico in both observational data and a realistic numerical circulation model of the Tampa Bay estuary. Hurricane Frances hit Tampa Bay on September 5, 2004 with surface winds peaking twice near 22 m s⁻¹. There were three stages to the hydrodynamic effect of Frances on Tampa Bay. The first stage included the approach of Frances up to the first wind peak. The winds were to the south and southeast. During this stage sea level was maintained below mean sea level (MSL) and the residual current (demeaned, detided) was weak. The second stage began as the winds turned to the east and northeast, as the eye passed near the bay, and ended as the second wind peak appeared. During this stage the residual currents were strongly positive (into the bay), raising sea level to 1.2 m above MSL at St. Petersburg. The measured residual circulation peaked at over +0.7 m s⁻¹ near the surface. The model shows this velocity peak yielded a maximum volume flux into the bay of +44,227 m³ s⁻¹, displacing a total volume of 1.5 billion m³ in just a few hours, about 42% of the bay volume. In the third stage a strong negative flow developed as the wind and sea level relaxed to near normal levels. The ADCP measured a peak outflow of −0.8 m s⁻¹ during this time. Model results indicate a maximum flux of −37,575 m³ s⁻¹, and that it took about 50 h to drain the extra volume driven into the bay by Hurricane Frances.  相似文献   

Magnitudes, spatial scales and processes of environmental antimony mobility from orogenic gold–antimony mineral deposits, Australasia     

P. M. Ashley  D. Craw  M. K. Tighe  N. J. Wilson 《Environmental Geology》2006,51(4):499-507

Antimony (Sb) is strongly concentrated into hydrothermal mineral deposits, commonly with gold, in metasedimentary sequences around the Pacific Rim. These deposits represent potential point sources for Sb in the downstream environment, particularly when mines are developed. This study documents the magnitude and scale of Sb mobility near some mineral deposits in Australia and New Zealand. Two examples of New Zealand historic mining areas demonstrate that natural groundwater dissolution of Sb from mineral deposits dominates the Sb load in drainage waters, with Sb concentrations between 3 and 24 μg/L in major streams. Mine-related discharges can exceed 200 μg/L Sb, but volumes are small. Sb flux in principal stream waters is ca 1–14 mg/s, compared to mine tunnel fluxes of ca 0.001 mg/s. Dissolved Sb is strongly attenuated near some mine tunnels by adsorption on to iron oxyhydroxide precipitates. Similar Sb mobilisation and attenuation processes are occurring downstream of the historic/active Hillgrove antimony–gold mine of New South Wales, Australia, but historic discharges of Sb-bearing debris has resulted in elevated Sb levels in stream sediments (ca 10–100⁺ mg/kg) and riparian plants (up to 100 mg/kg) for ca 300 km downstream. Dissolution of Sb from these sediments ensures that river waters have elevated Sb (ca 10–1,000 μg/L) over that distance. Total Sb flux reaching the Pacific Ocean from the Hillgrove area is ca 8 tonnes/year, of which 7 tonnes/year is particulate and 1 tonne/year is dissolved.  相似文献   

Monte Carlo simulation of mixing in Ca3Fe2Ge3O12–Ca4Ge4O12 garnets and implications for the thermodynamic stability of pyrope–majorite solid solution     

Victor L. Vinograd  Bjoern Winkler  Daniel J. Wilson  Andrew Putnis  Julian D. Gale 《Physics and Chemistry of Minerals》2006,33(8-9):533-544

Static lattice energy calculations, based on empirical pair potentials, were performed for a large set of structures differing in the arrangement of octahedral cations within the garnet 2 × 2 × 2 supercell. The compositions of these structures varied between Ca₃Fe₂Ge₃O₁₂ and Ca₄Ge₄O₁₂. The energies were cluster expanded using pair and quaternary terms. The derived ordering constants were used to constrain Monte Carlo simulations of temperature-dependent mixing properties in the ranges of 1,073–3,673 K and 0–10 GPa. The free energies of mixing were calculated using the method of thermodynamic integration. The calculations predict a wide miscibility gap between Fe-rich (cubic) and Fe-pure (tetragonal) garnets consistent with recent experimental observations of Iezzi et al. (Phys Chem Miner 32:197–207, 2005). It is shown that the miscibility gap arises due to a very strong cation ordering at the Fe-pure composition, driven by the charge difference between Ca²⁺ and Ge⁴⁺ cations. The structural and thermodynamic analogies between Ca–Ge and Mg–Si systems suggest that a similar miscibility gap should exist between pyrope and Mg–Si-majorite.  相似文献   

The effects of hazard zone information on judgements about earthquake damage     

Michael Crozier  John McClure  Jessica Vercoe  Marc Wilson 《Area》2006,38(2):143-152

This study investigates the extent to which people's views on the causes and preventability of earthquake damage might be influenced by their degree of exposure to hazard as well as what information they have been given about the hazard. The results show that the provision of hazard zoning information influences judgements on preventability and causes of damage, but this effect depends on the degree of hazard faced by residents. In low hazard zones, information leads to the view that causes are manageable, whereas in high hazard zones information may induce a degree of fatalism. The use of public information in risk management needs to take into account the degree of risk faced by the recipients.  相似文献   

Mixing and differentiation in the Oruanui rhyolitic magma, Taupo, New Zealand: evidence from volatiles and trace elements in melt inclusions     

Yang Liu  Alfred T. Anderson  Colin J. N. Wilson  Andrew M. Davis  Ian M. Steele 《Contributions to Mineralogy and Petrology》2006,151(1):71-87

Large pyroclastic rhyolites are snapshots of evolving magma bodies, and preserved in their eruptive pyroclasts is a record of evolution up to the time of eruption. Here we focus on the conditions and processes in the Oruanui magma that erupted at 26.5 ka from Taupo Volcano, New Zealand. The 530 km³ (void-free) of material erupted in the Oruanui event is comparable in size to the Bishop Tuff in California, but differs in that rhyolitic pumice and glass compositions, although variable, did not change systematically with eruption order. We measured the concentrations of H₂O, CO₂ and major and trace elements in zoned phenocrysts and melt inclusions from individual pumice clasts covering the range from early to late erupted units. We also used cathodoluminescence imaging to infer growth histories of quartz phenocrysts. For quartz-hosted inclusions, we studied both fully enclosed melt inclusions and reentrants (connecting to host melt through a small opening). The textures and compositions of inclusions and phenocrysts reflect complex pre-eruptive processes of incomplete assimilation/partial melting, crystallization differentiation, magma mixing and gas saturation. ‘Restitic’ quartz occurs in seven of eight pumice clasts studied. Variations in dissolved H₂O and CO₂ in quartz-hosted melt inclusions reflect gas saturation in the Oruanui magma and crystallization depths of ∼3.5–7 km. Based on variations of dissolved H₂O and CO₂ in reentrants, the amount of exsolved gas at the beginning of eruption increased with depth, corresponding to decreasing density with depth. Pre-eruptive mixing of magma with varying gas content implies variations in magma bulk density that would have driven convective mixing. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.  相似文献   

Cripple Creek and other alkaline-related gold deposits in the southern Rocky Mountains, USA: influence of regional tectonics   总被引：1，自引：0，他引：1  

Karen D. Kelley  Steve Ludington 《Mineralium Deposita》2002,37(1):38-60

Alkaline-related epithermal vein, breccia, disseminated, skarn, and porphyry gold deposits form a belt in the southern Rocky Mountains along the eastern edge of the North American Cordillera. Alkaline igneous rocks and associated hydrothermal deposits formed at two times. The first was during the Laramide orogeny (about 70-40 Ma), with deposits restricted spatially to the Colorado mineral belt (CMB). Other alkaline igneous rocks and associated gold deposits formed later, during the transition from a compressional to an extensional regime (about 35-27 Ma). These younger rocks and associated deposits are more widespread, following the Rocky Mountain front southward, from Cripple Creek in Colorado through New Mexico. All of these deposits are on the eastern margin of the Cordillera, with voluminous calc-alkaline rocks to the west. The largest deposits in the belt include Cripple Creek and those in the CMB. The most important factor in the formation of all of the gold deposits was the near-surface emplacement of relatively oxidized volatile-rich alkaline magmas. Strontium and lead isotope compositions suggest that the source of the magmas was subduction-modified subcontinental lithosphere. However, Cripple Creek alkaline rocks and older Laramide alkaline rocks in the CMB that were emplaced through hydrously altered LREE-enriched rocks of the Colorado (Yavapai) province have ²⁰⁸Pb/²⁰⁴Pb ratios that suggest these magmas assimilated and mixed with significant amounts of lower crust. The anomalously hot, thick, and light crust beneath Colorado may have been a catalyst for large-scale transfer of volatiles and crustal melting. Increased dissolved H₂O (and CO₂, F, Cl) of these magmas may have resulted in more productive gold deposits due to more efficient magmatic-hydrothermal systems. High volatile contents may also have promoted Te and V enrichment, explaining the presence of fluorite, roscoelite (vanadium-rich mica) and tellurides in the CMB deposits and Cripple Creek as opposed to deposits to the south. Deep-seated structures of regional extent that formed during the Proterozoic allowed the magmas to rise to shallow crustal levels. Proterozoic sites of intrusions at 1.65, 1.4, and 1.1 Ga were also important precursors to alkaline-related gold deposits. Many of the larger gold deposits are located at sites of Proterozoic intrusions, and are localized at the intersection of northeast-trending ductile shear zones formed during Mesoproterozoic deformation, and an important north-trending fault formed during 1.1 Ga rifting.  相似文献   

Ludlow (Silurian) stromatoporoid biostromes from Gotland, Sweden: facies, depositional models and modern analogues   总被引：1，自引：0，他引：1  

Olof Sandström  Steve Kershaw† 《Sedimentology》2002,49(3):379-395

Stacked stromatoporoid‐dominated biostromes of the Ludlow‐age Hemse Group (Silurian) in eastern Gotland, Sweden, are 0·5–5 m thick and a few tens of metres to >1 km in lateral extent. They form one of the world's richest Palaeozoic stromatoporoid deposits. This study compiles published and new data to provide an overall facies model for these biostromes, which is assessed in relation to possible modern analogues. Some biostromes have predominantly in‐place fossils and are regarded as reefs, but lack rigid frameworks because of abundant low‐profile non‐framebuilding stromatoporoids; other biostromes consist of stromatoporoid‐rich rudstones interpreted here as storm deposits. Variation between these two `end‐members' occurs both between interlayered biostromes and also vertically and laterally within individual biostromes. Such variation produces problems of applying established reef classification terms and demonstrates the need for the development of terminology that recognizes taphonomic destruction of reef fabrics. An approach to such terminology is found in all four categories of a recent biostrome classification scheme that are easily recognized in the Hemse biostrome facies: autobiostromes (>60% in place); autoparabiostromes (a mixture of in‐place and overturned reef‐building organisms, 20–60% in place); parabiostromes (builders are overturned and damaged, <20% in place); and allobiostromes (transported and detrital reef material, nothing in place). These categories provide a broad taphofacies scheme for the Hemse biostromes, which are mostly autoparabiostrome to allobiostrome. The biostromes developed on crinoidal grainstone sheets and expanded laterally across relatively flat substrates in a marine setting of low siliciclastic input. Planar erosion surfaces commonly terminate biostrome tops. Three broadly similar modern analogues are identified, each of which has elements in common with the Hemse biostromes, but none of which is an exact equivalent: (a) laterally expanded and coalesced back‐barrier patch reefs behind the Belize barrier, an area influenced by limited accommodation space; (b) a hurricane‐influenced shelf, interpreted for Grand Cayman, where reef cores consist of rubble and lack substantial framework; the wide distribution of rounded pebbles and cobbles of stromatoporoids in the Hemse biostromes most probably resulted from hurricanes; (c) coral carpets in 5–15 m water depth of the northern Red Sea, where lateral expansion of low‐diversity frames dominated by Porites coral has produced low‐profile biostromes up to 8 m thick and several km long. Such carpets accumulated large amounts of carbonate, with little export, as in the Hemse biostromes, although the latter did not build frameworks because of the nature of growth of the stromatoporoids. The notable lack of algae in the Hemse biostrome facies is also a feature of Red Sea coral carpets; nevertheless, coral carpets are ecologically different. Hemse biostromes lack evidence of a barrier reef system, although this may not be exposed; the facies assemblage is consistent with either a storm/hurricane‐influenced mid‐ to upper ramp or back‐barrier system.  相似文献