Occurrence,durée et intensité des précipitations simulées par deux modèles régionaux canadiens du climat sur la région du Maghreb     

Mariem Jelassi  Philippe Gachon  René Laprise 《大气与海洋》2016,54(5):469-497

[Translated by the editorial staff] Simulating the precipitation regime of Northern Africa is challenging for regional climate models, particularly because of the strong spatial and temporal variability of rain events in the region. In this study we evaluate simulations conducted with two recent versions of regional climate models (RCM) developed in Canada: the CRCM5 and CanRCM4. Both are also used in the COordinated Regional Climate Downscaling EXperiment (CORDEX)-Africa. The assessment is based on the occurrence, duration, and intensity indices of daily precipitation in Maghreb during the fall and spring seasons from 1998 to 2008. We also examine the links between the North-Atlantic Oscillation (NAO) index, weather systems, and the precipitation regime over the region. During the rainy season (September to February), the CRCM5 reproduces the frequency and intensity of extreme precipitation adequately, as well as the occurrence of days with rain, while the CanRCM4 underestimates precipitation extremes. The study of links between weather systems and the precipitation regime shows that, along the Atlantic coast, precipitation (occurrence, intensity, and wet sequences) increases significantly with storm frequency in the fall. In winter, these links grow stronger going east, from the Atlantic coast to the Mediterranean coast. The negative phases of the NAO index are statistically associated with the increase in rain intensity, extremes, and accumulation along the Atlantic coast in the fall. However, the link weakens in winter over these regions and strengthens along the Mediterranean coast as the precipitation frequency rises during negative phases of the NAO. Both RCMs generally reproduce the links between the NAO and the precipitation regime well, regardless of location.  相似文献   

贵州西北部基性侵入岩锆石U-Pb年代学、岩石地球化学特征 及其与铅锌成矿关系初探   总被引：1，自引：0，他引：1  

齐有强  胡瑞忠  张海  任光明  武丽艳  朱经经  王新松  孟昌忠  金翔霖 《地质学报》2016,90(5):933-949

贵州西北部发育多处基性侵入岩,总体规模较小(约0.25 Km2),多沿深大断裂侵位,出露于铅锌矿点外围,本文对猫猫厂、凉山两处矿点附近的儿马冲和白岩庆两地小型基性侵入岩进行了重点研究。侵入岩主要岩性为细粒辉长岩,造岩矿物主要为拉长石、普通辉石。SiO2范围为49.60-51.09 wt%,MgO从3.88-4.27 wt %,TiO2为3.69-3.85 wt %。LA-ICP-MS锆石U-Pb定年结果为268.3±7.4 Ma,显示岩浆侵位于二叠纪。基性侵入岩的微量元素蛛网图呈OIB型特征,富集大离子亲石元素（LILE）、轻稀土元素（LREE）,亏损重稀土元素（HFEE）,相对亏损高场强元素（Nb,Ta）,有Sr、Y亏损,Pb富集。(87Sr/86Sr)i范围0.706749～0.707069,(143Nd/144Nd)i范围0.512313～0.512363,εNd(t)范围0.2～1.2;源区熔融深度处于石榴石橄榄岩相深度,可能经历了1-3 %的部分熔融,处于亏损石榴石二辉橄榄岩相向原始石榴石二辉橄榄岩相的过渡区。成岩过程中发生了单斜辉石、斜长石等矿物分离结晶,受到了有限的地壳混染作用,未经历明显的AFC过程。地壳物质在地幔源区中的加入可能是造成地幔富集的主要原因。侵入岩与成矿作用之间的关系,主要通过两方面所表现。一方面是二者间构造活动上的耦合性。另一方面是基性岩在成矿过程中可能发挥了重要的化学屏障层作用。  相似文献   

Generating GPS satellite fractional cycle bias for ambiguity-fixed precise point positioning   总被引：1，自引：0，他引：1  

Pan Li  Xiaohong Zhang  Xiaodong Ren  Xiang Zuo  Yuming Pan 《GPS Solutions》2016,20(4):771-782

With the development of precise point positioning (PPP), the School of Geodesy and Geomatics (SGG) at Wuhan University is now routinely producing GPS satellite fractional cycle bias (FCB) products with open access for worldwide PPP users to conduct ambiguity-fixed PPP solution. We provide a brief theoretical background of PPP and present the strategies and models to compute the FCB products. The practical realization of the two-step (wide-lane and narrow-lane) FCB estimation scheme is described in detail. With GPS measurements taken in various situations, i.e., static, dynamic, and on low earth orbit (LEO) satellites, the quality of FCB estimation and the effectiveness of PPP ambiguity resolution (AR) are evaluated. The comparison with CNES FCBs indicated that our FCBs had a good consistency with the CNES ones. For wide-lane FCB, almost all the differences of the two products were within ±0.05 cycles. For narrow-lane FCB, 87.8 % of the differences were located between ±0.05 cycles, and 97.4 % of them were located between ±0.075 cycles. The experimental results showed that, compared with conventional ambiguity-float PPP, the averaged position RMS of static PPP can be improved from (3.6, 1.4, 3.6) to (2.0, 1.0, 2.7) centimeters for ambiguity-fixed PPP. The average accuracy improvement in the east, north, and up components reached 44.4, 28.6, and 25.0 %, respectively. A kinematic, ambiguity-fixed PPP test with observation of 80 min achieved a position accuracy of better than 5 cm at the one-sigma level in all three coordinate components. Compared with the results of ambiguity-float, kinematic PPP, the positioning biases of ambiguity-fixed PPP were improved by about 78.2, 20.8, and 65.1 % in east, north, and up. The RMS of LEO PPP test was improved by about 23.0, 37.0, and 43.0 % for GRACE-A and GRACE-B in radial, tangential, and normal directions when AR was applied to the same data set. These results demonstrated that the SGG FCB products can be produced with high quality for users anywhere around the world to carry out ambiguity-fixed PPP solutions.  相似文献   

Using Geomechanical Method to Predict Tectonic Fractures in Low-Permeability Sandstone Reservoirs     

Feng Jianwei  Ren Qiqiang  Xu Ke 《地球科学进展》2016,31(9):946-967

Understanding and interpreting the timing, location, orientation, and intensity of natural fractures within a geological structure are commonly important to both exploration and production planning activities of low-porosity and low-permeability carbonate reservoirs. In this study, we explore the application of comprehensive geomechanical methods to quantitatively characterize the fracture parameters based on Strain Energy Density Theory, such as linear fracture density and volume fracture density. This study approach is based on the idea that energy generated by tectonic stress on brittle sandstone,which can be distinguished fracture surface energy, friction energy dissipation and residual strain energy and natural fractures can be interpreted or inferred from geomechanical-model-derived strains. For this analysis, we model an extension and compression compound fault block developed in a mechanically stratified sandstone and shale sequence because mechanics experimental data and drilling data exist that can be directly compared with model results.However, the results show that the approach and our study conclusion are independent of the specified structural geometry, which can correlate fracture parameters in different stages with different tectonic activities, and finally build and visualize fracture networks in sandstone. The presence or absence of filling minerals in fractures is shown to strongly control the destruction and transformation of low-permeability sandstone, and this control possesses crucial implications for interpreting fracture aperture and reservoir flow simulation.  相似文献   

珠江黄茅海河口洪季侧向余环流与泥沙输移   总被引：1，自引：1，他引：0  

杨名名  吴加学  张乾江  任杰  刘欢 《海洋学报》2016,38(1):31-45

2012年洪季对珠江黄茅海河口湾侧向动力结构与泥沙输移过程进行了系统观测,采用动量平衡和泥沙通量机制分解等方法,分析了河口流、温盐和泥沙侧向分布特征以及泥沙输移过程,探讨了侧向动量平衡与泥沙输移机制。洪季黄茅海河口存在明显的侧向流,西滩和北槽均形成表层向东、底层向西的两层侧向流,拦门沙滩顶呈现表、底层向西、中层向东的三层侧向流,而拦门沙前缘侧向流整体向西。河口湾纵向净泥沙通量表现为北槽向海、西滩向陆,拦门沙滩顶及其前缘均向海;侧向净泥沙通量表现为滩顶及其前缘均向西,西滩向东、北槽向西。这种侧向泥沙辐聚过程是高浓度悬沙聚集于滩槽界面的重要原因,向陆净通量是西滩回淤的重要原因。滩槽间侧向余环流动量平衡主要是侧向斜压梯度力、科氏力和侧向平流作用。欧拉平流输运在侧向泥沙输运中起主要作用,潮泵效应也起重要作用。  相似文献   

Modern modes of provenance and dispersal of terrigenous sediments in the North Pacific and Bering Sea: implications and perspectives for palaeoenvironmental reconstructions   总被引：1，自引：0，他引：1  

Rong Wang  Boris K. Biskaborn  Arne Ramisch  Jian Ren  Yongzhan Zhang  Rainer Gersonde  Bernhard Diekmann 《Geo-Marine Letters》2016,36(4):259-270

During expedition 202 aboard the RV Sonne in 2009, 39 seafloor surface sediment sites were sampled over a wide sector of the North Pacific and adjoining Bering Sea. The data served to infer land–ocean linkages of terrigenous sediment supply in terms of major sources and modes of sediment transport within an over-regional context. This is based on an integrated approach dealing with grain-size analysis, bulk mineralogy and clay mineralogy in combination with statistical data evaluation (end-member modelling of grain-size data, fuzzy cluster analysis of mineralogical data). The findings on clay mineralogy served to update those of earlier work extracted from the literature. Today, two processes of terrigenous sediment supply prevail in the study area: far-distance aeolian sediment supply to the pelagic North Pacific, and hemipelagic sediment dispersal from nearby land sources via ocean currents along the continental margins and island arcs. Aeolian particles show the finest grain sizes (clay and fine silt), whereas hemipelagic sediments have high abundances of coarse silt. Exposed sites on seamounts and the continental slope are partly swept by strong currents, leading to residual enrichment of fine sand. Four sediment sources can be distinguished on the basis of distinct index minerals revealed by statistical data analysis: dust plumes from central Asia (quartz, illite), altered materials from the volcanic regions of Kamchatka and the Aleutian Arc (smectite), detritus from the Alaskan Cordillera (chlorite, hornblende), and fluvial detritus from far-eastern Siberia and the Alaska mainland (quartz, feldspar, illite). These findings confirm those of former studies but considerably expand the geographic range of this suite of proxies as far south as 39°N in the open North Pacific. The present integrated methodological approach proved useful in identifying the major modern processes of terrigenous sediment supply to the study region. This aspect deserves attention in the selection of sediment core sites for future palaeoenvironmental reconstructions related to aeolian and glacial dynamics, as well as the recognition of palaeo-ocean circulation patterns in general.  相似文献   

Experimental study of nonlinear behaviors of a free-floating body in waves     

贺铭  任冰  邱大洪 《中国海洋工程》2016,30(3):421-430

Nonlinear behaviors of a free-floating body in waves were experimentally investigated in the present study. The experiments were carried out for 6 different wave heights and 6 different wave periods to cover a relatively wide range of wave nonlinearities. A charge-coupled device (CCD) camera was used to capture the real-time motion of the floating body. The measurement data show that the sway, heave and roll motions of the floating body are all harmonic oscillations while the equilibrium position of the sway motion drifts in the wave direction. The drift speed is proportional to wave steepness when the size of the floating body is comparable to the wavelength, while it is proportional to the square of wave steepness when the floating body is relatively small. In addition, the drift motion leads to a slightly longer oscillation period of the floating body than the wave period of nonlinear wave and the discrepancy increases with the increment of wave steepness.  相似文献   

基于动态极值理论和Copula函数的极端海平面高度预测建模     

汪杨骏  侯太平  张韧  钱龙霞  王锋  龙强 《海洋工程》2016,34(4):62-70

全球气候变化背景下,海平面上升是一个潜在的重大风险,为防范气候灾害,应对极端气象海洋事件,需客观、定量地对未来极端海平面变化进行科学预测。为此,基于Copula函数和动态极值分析理论,综合考虑平均海平面变化(包括垂直陆地运动和基准的局地变化)与潮、涌、浪等其他气候变化的增水对极端海平面高度的影响,采用DREAM方法改进Bayes推断对动态极值模型的参数空间估计问题,提出一种新的模型对未来极端海平面高度变化进行预测,旨在改进传统模型存在的不确定性问题,并运用该模型对气候变化背景下厦门地区未来35年的海平面变化情景进行了模型应用和实验模拟。  相似文献   

Production and Certification of Synthetic Selenium Isotopic Reference Materials          下载免费PDF全文

Tongxiang Ren  Jun Wang  Hai Lu  Tao Zhou  Yuanjing Zhou 《Geostandards and Geoanalytical Research》2016,40(2):227-238

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.  相似文献   

Geological formation and geo-hazards during subway construction in Guangzhou     

Dong-Jie Ren  Shui-Long Shen  Wen-Chieh Cheng  Ning Zhang  Zhi-Feng Wang 《Environmental Earth Sciences》2016,75(11):934

  相似文献