Ocean Data Assimilation in the Tropical Pacific: A Short Survey     

Masafumi Kamachi  Yosuke Fujii  Xiaobing Zhou 《Journal of Oceanography》2002,58(1):45-55

This short survey presents several research and operational developments of ocean data assimilation in the tropical Pacific, primarily for climate-scale phenomena. Aspects of theoretical error estimations, diagnostics and practical reduced space techniques are also briefly reported. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

A new expression for the production rate of sea water droplets on the sea surface     

Noriko Iida  Yoshiaki Toba  Masaaki Chaen 《Journal of Oceanography》1992,48(4):439-460

A new set of empirical formulas for the production rate and the number concentration of sea-water droplets on the sea surface are proposed, synthesizing past observation data of sea-salt particles in the sea and water droplets in wind-wave tanks. A new levelz _c is introduced as the effective wind-sea surface where seawater droplets are produced. The new formulas are expressed in linear functions in logarithmic scales ofu*²/v _p , a parameter to describe overall conditions of airsea boundary processes, whereu _* is the friction velocity of air,v the kinematic viscosity of air and _p the peak angular frequency of wind-wave part of wave spectra. A model of coexistence of spray droplets and suspended particles near the sea surface is proposed. As for the independent parameter, a comparison between the uses ofu*²/v _p and ofu _* ³ which was the traditional way of parameterization excluding wave measure, shows that the advantage of usingu*²/v _p is statistically significant with a confidence limit 89% in F-test.  相似文献   

Data assimilation of sea ice concentration into a global ocean–sea ice model with corrections for atmospheric forcing and ocean temperature fields     

Takahiro Toyoda  Yosuke Fujii  Tamaki Yasuda  Norihisa Usui  Koji Ogawa  Tsurane Kuragano  Hiroyuki Tsujino  Masafumi Kamachi 《Journal of Oceanography》2016,72(2):235-262

  相似文献   

A large-scale excavation in soft Holocene deposit and its elasto-viscoplastic analysis     

Fusao Oka  Naoki Takada  Kazuyuki Shimono  Yosuke Higo  Sayuri Kimoto 《Acta Geotechnica》2016,11(3):625-642

In the present study, the large-scale excavation in the construction is numerically back-analyzed using a soil–water-coupled finite element method with an elasto-viscoplastic model which considers the strain-induced degradation. The measurements of the deformation have been performed during the construction of a new railway station in Osaka, Japan, in which a large and deep excavation has been successfully carried out using a special deep mixing type of soil improvement method with earth retaining walls through the thick Holocene Osaka Umeda clay deposit. A comparison between the numerical results and the measurements of the excavation at Osaka shows that the simulation method can reproduce the overall deformation of the soft ground and the earth retaining walls including the time-dependent behaviour during the excavation and a deep mixing soil improvement method as an additional technique for stability are effective.  相似文献   

Influence of evaporation from the forest floor on evapotranspiration from the dry canopy     

Kenichi Daikoku  Shigeaki Hattori  Aiko Deguchi  Yu Aoki  Mari Miyashita  Kazuho Matsumoto  Junichi Akiyama  Shinichi Iida  Tae Toba  Yuji Fujita  Takeshi Ohta 《水文研究》2008,22(20):4083-4096

  相似文献   

Near-Infrared Colors of the Binary Kuiper Belt Object 1998 WW 31     

Takato  Naruhisa  Fuse  Tetsuharu  Gaessler  Wolfgang  Goto  Miwa  Kanzawa  Tomio  Kobayashi  Naoto  Minowa  Yosuke  Oya  Shin  Pyo  Tae-Soo  Saint-Jacque  D.  Takami  Hideki  Terada  Hiroshi  Hayano  Yutaka  Iye  Masanori  Kamata  Yukiko  Tokunaga  A. T. 《Earth, Moon, and Planets》2003,92(1-4):183-191

We have measured near-infrared colorsof the binary Kuiper Belt object (KBO)1998 WW₃₁ using the Subaru Telescope withadaptive optics. The satellite was detectednear its perigee and apogee(0.18“ and 1.2” apart from the primary).The primary and the satellite have similar H–Kcolors, while the satellite is redder thanthe primary in J–H. Combined with the Rband magnitude previously published byVeillet et al., 2002, the color of the primaryis consistent with that of optically red KBOs. Thesatellite's R-, J-, H-colors suggest thepresence of ～1 μm absorption band dueto rock-forming minerals. If the surface of thesatellite is mainly composed by olivine, thesatellite's albedo is higher value than the canonicallyassumed value of 4%.  相似文献   

Detailed paleoseismic history of the Hinagu fault zone revealed by the high-density radiocarbon dating and trenching survey across a surface rupture of the 2016 Kumamoto earthquake,Kyushu, Japan     

Yoshiki Shirahama  Yukari Miyashita  Masao Kametaka  Yuji Suzuki  Yosuke Miyairi  Yusuke Yokoyama 《Island Arc》2021,30(1):e12376

The NE-trending Hinagu fault zone, length 81 km, is one of the major active faults in Kyushu, Japan. From north to south, it is divided into three segments based on geomorphic features and paleoseismic behavior: the Takano-Shirahata, Hinagu, and Yatsushiro Sea segments. The 2016 Kumamoto earthquake produced a 6-km-long surface rupture with a dextral strike-slip displacement on the northern part of the Takano-Shirahata segment. Surface rupture, a faint east-side-up flexure with a vertical offset of less than 8 cm, was observed near the middle of the Takano-Shirahata segment. To examine past surface-rupturing earthquakes on the Takano-Shirahata segment, including rupture frequency and timing, we conducted a paleoseismic study with boring and trenching at Yamaide. A trench across the surface rupture exposed multiple fault strands associated with multiple surface-rupturing events that deformed several strata of fine-grained sediments. By structural and stratigraphic interpretation, high-density radiocarbon dating and tephra analysis, and Bayesian modeling, we constrained the timing of seven events, Events 1–7, to 0.84–1.25, 1.31–7.06, 9.99–11.0, 10.8–12.1, 12.0–13.0, 14.2–15.1, and before 14.8 kcal BP. Slip during Events 1–6 was obviously larger than the 2016 slip. The estimated average recurrence interval was about 2596–2860 years, but the interval between Events 2 and 3 was much longer than other intervals. Moreover, the vertical throw associated with Event 2 was larger than that of other events. This implies that the Takano-Shirahata segment has a period with rare larger earthquakes and a period with frequent smaller earthquakes. Some events might have produced ruptures on both the Takano-Shirahata and the northern part of the Hinagu segments simultaneously or in a short time. The variety of recurrence intervals suggests that the seismic activity has been affected by one or both activities of the Futagawa fault zone and the Hinagu segment.  相似文献   

Three‐dimensional structures and elemental distributions of Stardust impact tracks using synchrotron microtomography and X‐ray fluorescence analysis     

A. Tsuchiyama  T. Nakamura  T. Okazaki  K. Uesugi  T. Nakano  K. Sakamoto  T. Akaki  Y. Iida  T. Kadono  K. Jogo  Y. Suzuki 《Meteoritics & planetary science》2009,44(8):1203-1224

Abstract— Three‐dimensional structures and elemental abundances of four impact tracks in silica aerogel keystones of Stardust samples from comet 81P/Wild 2 (bulbous track 67 and carrot‐type tracks 46, 47, and 68) were examined non‐destructively by synchrotron radiation‐based microtomography and X‐ray fluorescence analysis. Track features, such as lengths, volumes and width as a function of track depth, were obtained quantitatively by tomography. A bulbous portion was present near the track entrance even in carrot‐type tracks. Each impact of a cometary dust particle results in the particle disaggregated into small pieces that were widely distributed on the track walls as well as at its terminal. Fe, S, Ca, Ni, and eight minor elements are concentrated in the bulbous portion of track 68 as well as in terminal grains. It was confirmed that bulbous portions and thin tracks were formed by disaggregation of very fine fragile materials and relatively coarse crystalline particles, respectively. The almost constant ratio of whole Fe mass to track volume indicates that the track volume is almost proportional to the impact kinetic energy. The size of the original impactor was estimated from the absolute Fe mass by assuming its Fe content (CI) and bulk density. Relations between the track sizes normalized by the impactor size and impact conditions are roughly consistent with those of previous hypervelocity impact experiments.  相似文献   

Aerodynamic Scaling for Estimating the Mean Height of Dense Canopies   总被引：1，自引：1，他引：0  

Taro Nakai  Akihiro Sumida  Kazuho Matsumoto  Ken’ichi Daikoku  Shin’ichi Iida  Hotaek Park  Mie Miyahara  Yuji Kodama  Alexander V. Kononov  Trofim C. Maximov  Hironori Yabuki  Toshihiko Hara  Takeshi Ohta 《Boundary-Layer Meteorology》2008,128(3):423-443

We used an aerodynamic method to objectively determine a representative canopy height, using standard meteorological measurements. The canopy height may change if the tree height is used to represent the actual canopy, but little work to date has focused on creating a standard for determining the representative canopy height. Here we propose the ‘aerodynamic canopy height’ h _a as the most effective means of resolving the representative canopy height for all forests. We determined h _a by simple linear regression between zero-plane displacement d and roughness length z ₀, without the need for stand inventory data. The applicability of h _a was confirmed in five different forests, including a forest with a complex canopy structure. Comparison with stand inventory data showed that h _a was almost equivalent to the representative height of trees composing the crown surface if the forest had a simple structure, or to the representative height of taller trees composing the upper canopy in forests with a complex canopy structure. The linear relationship between d and z ₀ was explained by assuming that the logarithmic wind profile above the canopy and the exponential wind profile within the canopy were continuous and smooth at canopy height. This was supported by observations, which showed that h _a was essentially the same as the height defined by the inflection point of the vertical profile of wind speed. The applicability of h _a was also verified using data from several previous studies.  相似文献   

Sudden strong current generated by an eddy in the eastern part of Wakasa Bay,Japan     

Atsushi Kaneda  Kouta Ayukawa  Naoki Hirose  Jun Tsuzuki  Yutaka Kumaki  Tomoharu Senjyu  Yosuke Igeta  Tatsuro Watanabe 《Journal of Oceanography》2017,73(2):181-192

A sudden strong coastal current called a “kyucho” occurred in August 2013 in the eastern coastal waters of Wakasa Bay, Japan. This study examined its characteristics based on both observational data collected by intensive field investigations and the simulation results of a numerical model. The field investigations comprised moored buoy observations near the coast and voyages by a research vessels and fishing boats. The mooring observations indicated that a current speed exceeding 50 cm s^?1 occurred abruptly near the eastern coast of the bay, in association with a synchronous change in the current direction. Data collected by acoustic Doppler current profilers (ACDPs) mounted on the vessels showed that a clockwise eddy existed in the bay and that the current on the east side of the eddy generated the kyucho near the coast. Based on the results of the numerical model and the analysis of the ADCP data, it was considered that the clockwise eddy was generated by a strong current at the tip of the Tango Peninsula, in the western part of the bay. As the eddy propagated from west to east across the bay, it induced the kyucho in the coastal waters in the east of the bay.  相似文献