Physical Controls on Spatial Variability in Decomposition of Organic Matter in Lake Kinneret,Israel     

Ami Nishri  Alon Rimmer  Udi Wagner  Zvi Rosentraub  Peter Yeates 《Aquatic Geochemistry》2011,17(3):195-207

High resolution chemical data collected during summer 2003 indicate that the lower water mass (LWM) of the thermally stratified Lake Kinneret (LK) can be subdivided into three layers: a benthic boundary layer (BBL), overlain by the hypolimnion (HYP), and on top, the lower part of the metalimnion (ME-L). After onset of thermal stratification, the BBL is the first layer that turns anoxic, followed shortly afterward by the ME-L, while the HYP remains oxic and has relatively higher pH until later in summer. Thus, during the early summer, the HYP forms an oxygen-containing layer in-between two DO-deficient layers. Somewhat later, the HYP is characterized by still having significant levels of nitrate NO₃, while in both adjacent layers nitrate is already removed through denitrification. The mechanisms controlling the gradual decline of dissolved oxygen (DO) in the HYP during the summer were studied. The seasonal mean lake-wide vertical eddy diffusion coefficient in this layer, evaluated from heat flux measurements, is approximately 4 × 10⁻⁶ m² s⁻¹. The vertical oxygen flux due to diffusion from within the HYP toward its oxygen-deficient upper and lower boundaries accounts for most of the slow summer decline in DO in this layer. A smaller portion of this decline can be attributed to in-layer respiratory processes. The low turbidity, relatively high pH, and slow accumulation rate of NH₄ in the HYP support the notion that the slower mineralization processes occurring in this layer result from relatively low ambient concentrations of biodegradable organic matter, most probably due to the short residence time of the particles settling through this layer.  相似文献   

Eigenrays in 3D heterogeneous anisotropic media,Part I: Kinematics     

Zvi Koren  Igor Ravve 《Geophysical Prospecting》2021,69(1):3-27

We present a new ray bending approach, referred to as the Eigenray method, for solving two‐point boundary‐value kinematic and dynamic ray tracing problems in 3D smooth heterogeneous general anisotropic elastic media. The proposed Eigenray method is aimed to provide reliable stationary ray path solutions and their dynamic characteristics, in cases where conventional initial‐value ray shooting methods, followed by numerical convergence techniques, become challenging. The kinematic ray bending solution corresponds to the vanishing first traveltime variation, leading to a stationary path between two fixed endpoints (Fermat's principle), and is governed by the nonlinear second‐order Euler–Lagrange equation. The solution is based on a finite‐element approach, applying the weak formulation that reduces the Euler–Lagrange second‐order ordinary differential equation to the first‐order weighted‐residual nonlinear algebraic equation set. For the kinematic finite‐element problem, the degrees of freedom are discretized nodal locations and directions along the ray trajectory, where the values between the nodes are accurately and naturally defined with the Hermite polynomial interpolation. The target function to be minimized includes two essential penalty (constraint) terms, related to the distribution of the nodes along the path and to the normalization of the ray direction. We distinguish between two target functions triggered by the two possible types of stationary rays: a minimum traveltime and a saddle‐point solution (due to caustics). The minimization process involves the computation of the global (all‐node) traveltime gradient vector and the traveltime Hessian matrix. The traveltime Hessian is used for the minimization process, analysing the type of the stationary ray, and for computing the geometric spreading of the entire resolved stationary ray path. The latter, however, is not a replacement for the dynamic ray tracing solution, since it does not deliver the geometric spreading for intermediate points along the ray, nor the analysis of caustics. Finally, we demonstrate the efficiency and accuracy of the proposed method along three canonical examples.  相似文献   

Seismic stratigraphy and structural setting of the Adventure Plateau (Sicily Channel)     

D. Civile  E. Lodolo  H. Alp  Z. Ben-Avraham  A. Cova  L. Baradello  D. Accettella  M. Burca  J. Centonze 《Marine Geophysical Researches》2014,35(1):37-53

Within the central Mediterranean, the northwestern sector of the Sicily Channel is the unique area where two independent tectonic processes can be analyzed: the building of the Sicilian–Maghrebian Chain occurred in Late Miocene and the continental lithospheric rifting of the northern African margin occurred since Early Pliocene. These two geodynamic processes generated a peculiar structural style that is largely recognizable in the Adventure Plateau. This plateau is the shallowest part of the Sicily Channel, where water depths do not generally exceed 150 m. It hosts several areas of geomorphic relief, which in some cases rise up to less than 20 m beneath sea-level. A series of submarine magmatic manifestations occur in this area, mainly associated with the extensional phase which produced the rift-related depressions of Pantelleria, Malta and Linosa. Seismic-stratigraphic and structural analyses, based on a large set of multichannel seismic reflection profiles and well information acquired mostly for commercial purposes in the 1970s and 1980s, have allowed us to reconstruct the Triassic-Quaternary sedimentary succession of the Adventure Plateau and define its structural setting. A broad lithological distinction can be made between the successions ranging from Triassic to Paleogene, predominantly carbonate, and the successions ranging from Miocene to Quaternary, predominantly siliciclastic. Three main structural belts have been identified within the Adventure Plateau: (1) the northern belt, affected during Late Miocene time by ESE-verging thrusts belonging to the External Thrust System orogenic domain, which represents the lowermost structural level of the Sicilian–Maghrebian Orogen; (2) the Apenninic–Maghrebian domain of the Sicilian–Maghrebian Orogen, which occupies the northwestern sector of the Adventure Plateau, and that is overthrusted on the External Thrust System orogenic domain during the Late Miocene; (3) the extensional belt of the southwestern sector of the Adventure Plateau, affected by broad NW-trending, high-angle normal faults associated with the Early Pliocene continental rifting phase. The eastern boundary of the Adventure Plateau corresponds to a broadly N–S trending lithospheric transfer zone separating two sectors of the Sicily Channel characterized by a different tectonic evolution.  相似文献   

Magnetic Anomalies in the Eastern Mediterranean and the Tectonic Setting of the Eratosthenes Seamount     

Zvi Ben-Avraham  Yoram Shoham  Avihu Ginzburg 《Geophysical Journal International》1976,45(1):105-123

  相似文献   

Tectonic evolution of the Qumran Basin from high-resolution 3.5-kHz seismic profiles and its implication for the evolution of the northern Dead Sea Basin     

Ronald K. Lubberts  Zvi Ben-Avraham 《Tectonophysics》2002,346(1-2)

The Dead Sea Basin is a morphotectonic depression along the Dead Sea Transform. Its structure can be described as a deep rhomb-graben (pull-apart) flanked by two block-faulted marginal zones. We have studied the recent tectonic structure of the northwestern margin of the Dead Sea Basin in the area where the northern strike-slip master fault enters the basin and approaches the western marginal zone (Western Boundary Fault). For this purpose, we have analyzed 3.5-kHz seismic reflection profiles obtained from the northwestern corner of the Dead Sea. The seismic profiles give insight into the recent tectonic deformation of the northwestern margin of the Dead Sea Basin. A series of 11 seismic profiles are presented and described. Although several deformation features can be explained in terms of gravity tectonics, it is suggested that the occurrence of strike-slip in this part of the Dead Sea Basin is most likely. Seismic sections reveal a narrow zone of intensely deformed strata. This zone gradually merges into a zone marked by a newly discovered tectonic depression, the Qumran Basin. It is speculated that both structural zones originate from strike-slip along right-bending faults that splay-off from the Jordan Fault, the strike-slip master fault that delimits the active Dead Sea rhomb-graben on the west. Fault interaction between the strike-slip master fault and the normal faults bounding the transform valley seems the most plausible explanation for the origin of the right-bending splays. We suggest that the observed southward widening of the Dead Sea Basin possibly results from the successive formation of secondary right-bending splays to the north, as the active depocenter of the Dead Sea Basin migrates northward with time.  相似文献   

Hydrous pyrolysis of Monterey asphaltenes     

Zvi Sofer   《Organic Geochemistry》1988,13(4-6)

Hydrous pyrolysis of asphaltenes has been tested as a method to reconstruct the chemical composition of biodegraded oils and oil seeps. The asphaltenes of three oils (a nondegraded oil, a biodegraded oil, and a biodegraded oil seep) from the Monterey Formation were studied. Results show that the aliphatic fraction generated by hydrous pyrolysis is very similar in chemical composition to the non-degraded oil. This makes the method very useful in correlation studies of biodegraded and nondegraded oils. It also allows to roughly estimate the maturity of the source of the biodegraded oil or oil seep.  相似文献   

The origin of the Dead Sea rift     

Vladimir Lyakhovsky  Zvi Ben-Avraham  Moshe Achmon 《Tectonophysics》1994,240(1-4):29-43

The Dead Sea rift is considered to be a plate boundary of the transform type. Several key questions regarding its structure and evolution are: Does sea floor spreading activity propagate from the Red Sea into the Dead Sea rift? Did rifting activity start simultaneously along the entire length of the Dead Sea rift, or did it propagate from several centres? Why did the initial propagation of the Red Sea into the Gulf of Suez stop and an opening of the Gulf of Elat start?

Using crustal structure data from north Africa and the eastern Mediterranean and approximating the deformation of the lithosphere by a deformation of a multilayer thin sheet that overlies an inviscid half-space, the regional stress field in this region was calculated. Using this approach it is possible to take into account variations of lithospheric thickness and the transition from a continental to an oceanic crust. By application of a strain-dependent visco-elastic model of a solid with damage it is possible to describe the process of creation and evolution of narrow zones of strain rate localization, corresponding to the high value of the damage parameter i.e. fault zones.

Mathematical simulation of the plate motion and faulting process suggests that the Dead Sea rift was created as a result of a simultaneous propagation of two different transforms. One propagated from the Red Sea through the Gulf of Elat to the north. The other transform started at the collision zone in Turkey and propagated to the south.  相似文献   

Collisional processes in the eastern Mediterranean     

Dr. Zvi Ben-Avraham  Amos Nur 《International Journal of Earth Sciences》1986,75(1):209-217

In the eastern Mediterranean the collision of the Erastosthenes and the Anaximander Seamounts with the Cyprus arc results in a unique tectonic setting due to the small size of the eastern Mediterranean basin. As a result of the collision, some of the motion between the African plate and the Eurasian plate is taking place by thrust faulting along the north African passive margin. It seems that the stress at the plate boundary along the Cyprus arc may be transmitted southward to cause the reactivation of a pre-existing fault zone along the passive margin of eastern north Africa.

---

Zusammenfassung Im östlichen Mittelmeerbecken hat die Kollision des Erastosthenes und des Anaximander Seamounts mit dem Cypern-Bogen eine spezielle tektonische Situation geschaffen, die durch den engen Raum dieses Beckens bestimmt wird. Als Ergebnis dieser Kollision erscheinen Überschiebungen der Afrikanischen Platte auf Eurasische Platte entlang des passiven nordafrikanischen Randes. Es erscheint möglich, daß das Streßfeld an der Plattengrenze entlang des Zypernbogens südwärts wirkt und dadurch die alte Störungszone entlang des passiven Kontinentrandes von Nordafrika reaktiert wird.

---

Résumé En Méditerrannée orientale, la collision des guyots Eratosthène et Anaximandre avec l'arc de Chypre a engendré une situation tectonique particulière, due à la faible dimension du bassin est-méditerrannéen. Cette collision a eu pour conséquence la production de charriages de la plaque africaine sur la plaque eurasiatique le long de la marge passive nord-africaine. Il semble que les contraintes règnant au bord de la plaque le long de l'arc de Chypre se soient transmises vers le Sud pour y provoquer la réactivation d'une zône failleuse préexistante le long de la marge passive du NE de l'Afrique.

---

, . . , . . .

  相似文献   

Formation of sequential basins along a strike–slip fault–Geophysical observations from the Dead Sea basin     

Michael Lazar  Zvi Ben-Avraham  Uri Schattner   《Tectonophysics》2006,421(1-2):53-69

The Dead Sea basin is often cited as one of the classic examples for the evolution of pull-apart basins along strike–slip faults. Despite its significance, the internal structure of the northern Dead Sea basin has never been addressed conclusively. In order to produce the first comprehensive, high-resolution analysis of this area, all available seismic data from the northern Dead Sea (lake)–lower Jordan valley (land) were combined. Results show that the northern Dead Sea basin is comprised of a system of tectonically controlled sub-basins delimited by the converging Western and Eastern boundary faults of the Dead Sea fault valley. These sub-basins grow shallower and smaller to the north and are separated by structural saddles marking the location of active transverse faults. The sedimentary fill within the sub-basins was found to be relatively thicker than previously interpreted. As a result of the findings of this study, the “classic” model for the development of pull-aparts, based on the Dead Sea, is revised. The new comprehensive compilation of data produced here for the first time was used to improve upon existing conceptual models and may advance the understanding of similar basinal systems elsewhere.  相似文献   

Parameterization of a Composite Attenuation Relation for the Dead Sea Area Based on 3-D Modeling of Elastic Wave Propagation     

Adrien Oth  Friedemann Wenzel  Hillel Wust-Bloch  Ellen Gottschämmer  Zvi Ben-Avraham 《Pure and Applied Geophysics》2007,164(1):23-37

3-D simulations of elastic wave propagation generated by earthquakes with magnitudes between 5.5 and 7.0 are used to parameterize strong ground motion attenuation relations for the Dead Sea Rift (DSR) graben structure. The results show that standard attenuation relations with an isotropic distance parameter are inadequate for a graben structure with a deep sedimentary trough. A new strategy is devised for the parameterization of attenuation relations in graben structures by looking at the statistical properties of 53 simulated earthquakes of variable magnitudes located at various sites along the western boundary fault of the DSR graben. An exemplary attenuation relation is designed from the synthetics for the 1 Hz spectral acceleration, modifying the Joyner-Boore-type parametrization by adding coefficients suited for three different source-to-sensor configurations: within the graben, beyond the graben and path unaffected by the graben structure.  相似文献