Attenuation Correction Procedures for Water Vapour Fluxes from Closed-Path Eddy-Covariance Systems   总被引：1，自引：1，他引：0  

Benjamin R. K. Runkle  Christian Wille  Michal Gažovič  Lars Kutzbach 《Boundary-Layer Meteorology》2012,142(3):401-423

Evapotranspiration is a source of water vapour to the atmosphere, and as a crucial indicator of landscape behaviour its accurate measurement has widespread implications. Here we investigate errors that are prevalent and systematic in the closed-path eddy-covariance measurement of latent heat flux: the attenuation of fluxes through dampened cospectral power at high frequencies. This process is especially pronounced during periods of high relative humidity through the adsorption and desorption of water vapour along the tube walls. These effects are additionally amplified during lower air temperature conditions. Here, we quantify the underestimation of evapotranspiration by a closed-path system by comparing its flux estimate to simultaneous and adjacent measurements from an open-path sensor. We apply models relating flux loss to relative humidity itself, to the lag time of the cross-correlation peak between the water vapour and vertical wind velocity signals, and to models of cospectral attenuation relative to the cospectral power of simultaneous sensible heat-flux measurements. We find that including the role of temperature in modifying the attenuation–humidity relationship is essential for unbiased flux correction, and that physically based cospectral attenuation methods are effective characterizers of closed-path instrument signal loss relative to the unattenuated flux value.  相似文献   

Characterization of atmospheric surfactants in the bulk precipitation by electrochemical tools     

Palma Orlović-Leko  Zlatica Kozarac  Božena Ćosović  Slađana Strmečki  Marta Plavšić 《Journal of Atmospheric Chemistry》2010,66(1-2):11-26

Characterization of atmospheric surfactants in bulk precipitations was carried out by adsorption study at the mercury electrode/solution interface using phase sensitive AC voltammetry. The structure and permeability of the adsorbed organic films at the mercury electrode was tested using the redox processes of lead and cadmium ions as electrochemical tools. The effects of organic matter from the bulk precipitations (rainwater and melted snow) were compared to those obtained for aqueous solutions of model substances: aromatic hydrocarbon (naphtalene), anionic surfactant (sodium dodecylbenzene sulfonate, NDBS), protein (albumine) and selected model substances suggested to be representative of water soluble organic compounds (WSOC) in atmospheric water (monocarboxylic, dicarboxylic, and polyacidic compounds and levoglucosan). It was found that substances like humic acid and 3-hydroxybutanoic acid may play an important role in atmospheric heterogeneous chemistry because of their surface active potential.  相似文献   

Abstracts of papers from other journals     

L. D. De Feiter  G. Vassilyeva  J. -C. Henoux  Pavel Ambrož 《Solar physics》1971,17(2):512-511

  相似文献   

Morphometric and geological conditions for sediment accumulation in the Udava River,Outer Carpathians,Slovakia     

Dušan Barabas  Ján Bóna  Daniel Klein  Lenka Balážovičová 《地理学报(英文版)》2017,27(8):981-998

The accumulation of sediment in river channels is a phenomenon that is not only influenced by the channel morphology, but also by the physical and geographical characteristics and the endogenous and exogenous processes taking place in the catchment. This paper presents an analysis of the impact the changes in lithological conditions have on the morphological and morphometric parameters of the Udava River channel and their relation to the channel accumulation forms representative of the river’s longitudinal profile as well as of its planform. Results document when accumulation forms occur and what is their spatial distribution within the longitudinal and cross-sectional river profiles. More resistant structures created sections with a lower degree of sedimentation, while in depression segments the degree of sedimentation was higher. With the increase in longitudinal slope, the impact of channel width on the average channel bar size increased. Also a difference in the accumulation was observed between the left and right bank which could be possibly explained by the impact of Coriolis force.  相似文献   

Flares in Sigmoidal Coronal Structures – a Case Study     

Aurass  H.  Vršnak  B.  Hofmann  A.  Rudžjak  V. 《Solar physics》1999,190(1-2):267-293

We analyze radio observations, magnetograms and extrapolated field line maps, Hα filtergrams, and X-ray observations of two flare events (6 February 1992 in AR 7042 and 25 October 1994 in AR 7792) and study properties, evolution and energy release signatures of sigmoidal loop systems. During both events, the loop configuration seen in soft X-ray (SXR) images changes from a preflare sigmoidal shape to a relaxed post-flare loop system. The underlying magnetic field system consists of a quadrupolar configuration formed by a sheared arcade core and a remote field concentration. We demonstrate two possibilities: a sigmoidal SXR pattern can be due to a single continuous flux tube (the 1992 event). Alternatively, it can be due to a set of independent loops appearing like a sigmoid (the 1994 event). In both cases, the preflare and post-flare loops can be well reproduced by a linear force-free field and potential field, respectively, computed using preflare magnetograms. We find that thermal and non-thermal flare energy release indicators of both events become remarkably similar after applying spatial and temporal scale transformations. Using the spatial scaling between both events we estimated that the non-thermal energy release in the second event liberated about 1.7 times more energy per unit volume. A two-and-a-half times faster evolution indicates that the rate of the energy release per unit volume is more than four times higher in this event. A coronal type II burst reveals ignition and propagation of a coronal shock wave. In contrast, the first event, which was larger and released about a 10 times more energy during the non-thermal phase, was associated with a CME, but no type II burst was recorded. During both events, in addition to the two-ribbon flare process an interaction was observed between the flaring arcade and an emerging magnetic flux region of opposite polarity next to the dominant leading sunspot. The arcade flare seems to stimulate the reconnection process in an `emerging flux-type' configuration, which significantly contributes to the energy release. This regime is characterized by the quasiperiodic injection of electron beams into the surrounding extended field line systems. The repeated beam injections excite pulsating broadband radio emission in the decimetric-metric wavelength range. Each radio pulse is due to a new electron beam injection. The pulsation period (seconds) reflects the spatial scale of the emerging flux-type field configuration. Since broadband decimetric-metric radio pulsations are a frequent radio flare phenomenon, we speculate that opposite-polarity small-scale flux intrusions located in the vicinity of strong field regions may be an essential component of the energy release process in dynamic flares.  相似文献   

Estimation of Mining Tremor Occurrence by Using Neural Networks     

V. Rudajev  R. Číž 《Pure and Applied Geophysics》1999,154(1):57-72

—Changes of the primary strain-stress state (caused by interaction between natural conditions and mining activity) can result, under special circumstances, to the origin of seismic induced events. The question of induced seismic activity prediction was treated as a problem of time series extrapolation of maximum cumulative amplitudes and numbers of seismic events recorded per day. The treatment was carried out by means of Multilayered Perceptron Neural Networks (MLP NN). The application to mining tremor prediction has been tested and methodological conditions have been obtained. It was proved that the prediction of the number of mining tremors per day is more precise than the prediction of future energy (maximum amplitudes). Further advance, based on the processing of seismo-acoustic activity series, is introduced.  相似文献   

Refraction Effect in Geothermal Heat Flow Due to a 3-D Prism in a Two-Layered Earth     

Hvoždara  M.  Valkovlč  L. 《Studia Geophysica et Geodaetica》1999,43(4):407-426

A mathematical model of the disturbance of the stationary geothermal field due to a three-dimensional perturbing body embedded near the surface of a two layered earth. The theoretical analysis is based on the generalized theory of the double-layer potential, similar to the boundary integral method likely to direct current geoelectricity problems. Special attention is paid to cases in which a pan of the body's surface is tangential to the planar boundaries of the substratum or of the surface of the earth The numerical calculations are performed for a three-dimensional prism using methods similar to the boundary element method (BEM). Numerous graphs are shown for the disturbance of the temperature field and of the heat flow on the surface of the earth and along vertical profiles (boreholes).  相似文献   

Plastic litter in sediments from the Croatian marine protected area of the natural park of Telaščica bay (Adriatic Sea)     

Andrea Blašković  Paolo Fastelli  Hrvoje Čižmek  Cristiana Guerranti  Monia Renzi 《Marine pollution bulletin》2017,114(1):583-586

This paper reports baseline levels of litter (macro, meso and microplastics) in sediments collected from different areas of the Croatian MPA of the Natural Park of Tela??ica bay (Adriatic Sea, GSA n. 17). The distribution of total abundance according to size, for all analysed locations evidences that microplastics are the dominant fraction concerning item's numbers. In all analysed samples no macroplastics were found, while microplastics are 88.71% and mesoplastics are 11.29% of the total.  相似文献   

A finite element model for seismic response analysis of deformable rocking frames          下载免费PDF全文

Michalis F. Vassiliou  Kevin R. Mackie  Božidar Stojadinović 《地震工程与结构动力学》2017,46(3):447-466

A new finite element model to analyze the seismic response of deformable rocking bodies and rocking structures is presented. The model comprises a set of beam elements to represent the rocking body and zero‐length fiber cross‐section elements at the ends of the rocking body to represent the rocking surfaces. The energy dissipation during rocking motion is modeled using a Hilber–Hughes–Taylor numerically dissipative time step integration scheme. The model is verified through correct prediction of the horizontal and vertical displacements of a rigid rocking block and validated against the analytical Housner model solution for the rocking response of rigid bodies subjected to ground motion excitation. The proposed model is augmented by a dissipative model of the ground under the rocking surface to facilitate modeling of the rocking response of deformable bodies and structures. The augmented model is used to compute the overturning and uplift rocking response spectra for a deformable rocking frame structure to symmetric and anti‐symmetric Ricker pulse ground motion excitation. It is found that the deformability of the columns of a rocking frame does not jeopardize its stability under Ricker pulse ground motion excitation. In fact, there are cases where a deformable rocking frame is more stable than its rigid counterpart. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

IM‐based and EDP‐based decision models for the verification of the seismic collapse safety of buildings          下载免费PDF全文

Matjaž Dolšek  Nuša Lazar Sinković  Jure Žižmond 《地震工程与结构动力学》2017,46(15):2665-2682

Decision models for the verification of seismic collapse safety of buildings are introduced. The derivations are based on the concept of the acceptable (target) annual probability of collapse, whereas the decision making involves comparisons between seismic demand and capacity, which is familiar to engineering practitioners. Seismic demand, which corresponds to the design seismic action associated with a selected return period, can be expressed either in terms of an intensity measure (IM) or an engineering demand parameter (EDP). Seismic capacity, on the other hand, is defined by dividing the near‐collapse limit‐state IM or EDP by an appropriate risk‐targeted safety factor (γ _im or γ _edp ), which is the only safety factor used in the proposed decision model. Consequently, the seismic performance assessment of a building should be based on the best possible estimate. For a case study, it is shown that if the target collapse risk is set to 10^?4 (0.5% over a period of 50 years), and if the seismic demand corresponds to a return period of 475 years (10% over a period of 50 years), then it can be demonstrated that γ _im is approximately equal to 2.5 for very stiff buildings, whereas for buildings with long periods the value of γ _im can increase up to a value of approximately 5. The model using γ _edp is equal to that using γ _im only if it can be assumed that displacements, with consideration of nonlinear behavior, are equal to displacements from linear elastic analysis.  相似文献