GPS-derived deformation rates in northwestern Himalaya and Ladakh   总被引：1，自引：0，他引：1  

Sridevi Jade  H. J. Raghavendra Rao  M. S. M. Vijayan  V. K. Gaur  B. C. Bhatt  Kireet Kumar  Saigeetha Jaganathan  M. B. Ananda  P. Dileep Kumar 《International Journal of Earth Sciences》2011,100(6):1293-1301

Deformation rates derived from GPS measurements made at two continuously operating stations at Leh (34.1°N, 77.6°E) and Hanle (32.7°N, 78.9°E), and eight campaign sites in the trans-Himalayan Ladakh spanning 11 years (1997–2008), provide a clear picture of the kinematics of this region as well as the convergence rate across northwestern Himalaya. All the Ladakh sites move 32–34 mm/year NE in the ITRF2005 reference frame, and their relative velocities are 13–16 mm/year SW in the Indian reference frame and ~19 mm/year W with reference to the Lhasa IGS station in southeastern Tibet. The results indicate that there is no statistically significant deformation in the 200-km stretch between the continuous sites Leh and Hanle as well as between Leh and Nubra valley sites along the Karakoram fault, whereas the sites in and around the splayed Karakoram fault region indicate surface deformation of 2.5 mm/year. Campaign sites along the Karakoram fault zone indicate a fault parallel surface motion of 1.4–2.5 mm/year in the Tangste and western Panamik segment of the Karakoram fault, which quantifies the best possible GPS-derived dextral slip rate of 3 mm/year along this fault during this 11-year period. Baselines of Ladakh sites show convergence rates of 15–18 mm/year with respect to south India and 12–15 mm/year with respect to Delhi in north India and Almora in the Himalaya ~400 km north-northeast of Delhi. These constitute an arc normal convergence of 12–15 mm/year across the western Himalaya, which is consistent with arc normal convergence all along the Himalayan arc from west to east. Baseline extension rates of 14–16 mm/year between Lhasa and Ladakh sites are consistent with the east–west extension rate of Tibetan Plateau.  相似文献   

Role of unbalanced slab resistive force in the 2004 off Sumatra mega-earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> > 9.0) event     

Prosanta Kumar Khan 《International Journal of Earth Sciences》2011,100(7):1749-1758

Present study addresses the role of major plate-driving forces, particularly the slab pull and slab resistive forces, for the generation of 26 December 2004 M _w > 9.0 off Sumatra megathrust earthquake. Major controls on the plate-driving forces are normally visualized through age, speed, and average dip of the slab during subduction. Wide variation in age, plate obliquity, stress obliquity, subduction rate, dip angle, and flexing depth of the subducting oceanic lithosphere between Andaman and Sumatra thus allowed us for quantitative evaluation of the slab pull (F _SP) and slab resistive (F _SR) forces in three well-defined sectors (I, II and III). Computed values of these forces in the three sectors: (1) F _SP = 1.29 × 10¹³ N/m, F _SR = 1.41 × 10¹³ N/m; sector I, (2) F _SP = 2.10 × 10¹³ N/m, F _SR = 1.13 × 10¹³ N/m; sector II, and (3) F _SP = 2.08 × 10¹³ N/m, F _SR = 2.72 × 10¹³ N/m; sector III clearly suggest a spatial variation of stress regime in the subducting oceanic lithosphere. Excess F _SR in sectors I and III are interpreted as the causative forces behind the triggering of major seismic energy bursts near Sumatra and Andaman on 26 December 2004. A gap of minimum seismic energy burst near Great Nicobar possibly was controlled by the excess of F _SP in sector II. This study further advocates that the cyclic stress, resulted from unbalanced component of slab resistive force, had a definite control on the occurrence of 2004 off Sumatra megathrust earthquake around the flexing zone of the subducting lithosphere.  相似文献   

Identification of aquifer-recharge zones and sources in an urban development area (Delhi, India), by correlating isotopic tracers with hydrological features   总被引：1，自引：0，他引：1  

Manish Kumar  M. Someshwar Rao  Bhishm Kumar  Algappan Ramanathan 《Hydrogeology Journal》2011,19(2):463-474

Recharge zones and sources in an urban setup (NCT of Delhi, India) were identified using environmental isotopes (²H, ³H, ¹⁸O); they were then correlated with hydrogeological conditions. The isotopic results showed that groundwater is being recharged by surface water during the dry season, while recharge associated with local precipitation becomes prominent during the monsoon. The effect of source-water evaporation and altitude on the isotopic characteristics of groundwater was clearly noted. A gradual increase in groundwater age, i.e. decrease in tritium content, while moving away from the river/canals/drains, suggests a degree of mixing of old-aged groundwater with relatively young recharging water. Further, to substantiate the findings of isotopic investigations, surface recharge conditions were differentiated into potential pervious (recharge prone) and impervious (recharge resistant) surfaces through mapping of potential recharge areas based on soil type and water-table depth, to depict a three-dimensional illustration of hydrogeologically mediated recharge zones of the area. The hydrogeological evidence thus obtained about the spatial distribution of permeable zones, slope and boundary conditions, aptly substantiates the isotopic findings. The study seeks its impact by correlation of the isotopic findings with the regional groundwater flow regime which has been altered by the urban development.  相似文献   

Distribution behavior of polycyclic aromatic hydrocarbons in roadside soil at traffic intercepts within developing cities   总被引：2，自引：2，他引：0  

V. Kumar  N. C. Kothiyal 《International Journal of Environmental Science and Technology》2011,8(1):63-72

A study of polycyclic aromatic hydrocarbons pollution in roadside soil was conducted in developing city environment of northern India during autumn and winter season to ascertain the contamination levels and their distribution behavior in soil. The concentration of polycyclic aromatic hydrocarbons was determined at ten locations of Jalandhar city, Punjab in India at 1, 2 and 3 m distances from roadside in soil covering all the major traffic intercepts within city. The samples were extracted in acetone and dichloromethane (1:1) using soxhlet extraction. The extracts were then filtered on a silica gel micro column to remove impurities and elute was subjected to GC-FID. The total average concentration (city average) was found to be 4.04 ?g/g and 16.38 ?g/g during winter and autumn respectively. DiBenzo (ah) Anthracene and Benzo (a) Pyrene were the individual polycyclic aromatic hydrocarbons found in highest concentration at all the intercepts ranging between 0.008 to 28.4 ?g/g during winter and 0.01 to 252.55 ?g/g during autumn. Average concentration of non-carcinogenic and carcinogenic polycyclic aromatic hydrocarbons during winter and autumn was found to be 2.1 and 6.4 and 4.74 and 35.08 ?g/g respectively. The average ratio of non-carcinogenic and carcinogenic Polycyclic Aromatic Hydrocarbons was found to be 1:3 during winter, and 1:7.6 during autumn at most of the intercepts. Total carcinogenic polycyclic aromatic hydrocarbons concentration was found quite high (80 %) in comparison to non-carcinogenic polycyclic aromatic hydrocarbons (20 %) at most of the intercepts.  相似文献   

Morphological signatures of fault lines in an earthquake prone zone of southern Baromura hill, north-east India: a multi source approach for spatial data analysis. A critical review     

Sunil Kumar De  Sunando Bandyopadhyay 《Environmental Earth Sciences》2011,63(2):437-441

In a recent work, Dey et al. (Environ Earth Sci 59:353–361, 2009) presented some new observations on the southern part of one of the anticlinal ridges of Tripura, viz. the Baromura range. The work incorporated a number of irregularities and misinterpretations that need to be addressed to avoid future confusion. The present article critically reviews Dey et al.’s paper to bring out its inaccuracies.  相似文献   

Quantitative modeling of groundwater in Satluj River basin of Rupnagar district of Punjab using remote sensing and geographic information system   总被引：3，自引：1，他引：2  

Chander Kumar Singh  Satyanarayan Shashtri  Amit Singh  Saumitra Mukherjee 《Environmental Earth Sciences》2011,62(4):871-881

Water is a fluctuating resource making it difficult to measure in time and in space. To demonstrate the efficiency of the geographic information system (GIS) for groundwater studies, information on the parameters controlling groundwater such as lithology, geomorphology and lineament analysis were analyzed. LISS-III and Landsat satellite image of the area was used to infer information on the geologic lineaments and geomorphology. To delineate linear features enhancement and direction, filtering was performed on single bands of Landsat images. Thematic maps for geology, slope, geomorphology and lineament were prepared and integrated in GIS by assigning the weights and ranking to various parameters controlling the occurrence of groundwater to generate the groundwater potential map for the study area. The results indicate that the floodplain of river and its adjoining areas have very good groundwater potential, whereas the steeply sloping area in the northern part having high relief and slope possesses poor groundwater potential.  相似文献   

A study of arsenic,iron and other dissolved ion variations in the groundwater of Bishnupur District,Manipur, India   总被引：1，自引：1，他引：0  

Jayalakshmi Devi Oinam  AL. Ramanathan  Anurag Linda  Gurmeet Singh 《Environmental Earth Sciences》2011,62(6):1183-1195

The presence of arsenic (As) in groundwater and its effect on human health has become an issue of serious concern in recent years. The present study assessed the groundwater quality of the Bishnupur District, Manipur, with respect to drinking water standards. Higher concentrations of pH, iron and phosphate were observed at several locations. Phosphate and iron levels were highest in the pre-monsoon, followed by monsoon and post-monsoon seasons. The arsenic concentrations were highest during post-monsoon (1–200 μg L⁻¹) as compared to pre-monsoon (1–108 μg L⁻¹) and monsoon (2–99 μg L⁻¹). Kwakta and Ngakhalawai show higher levels of arsenic concentration as compared to the prescribed World Health Organization (WHO) and Bureau of Indian Standards (BIS) norms. Arsenic showed a strong positive correlation with phosphate and negative correlation with sulphate, suggesting a partial influence of anthropogenic sources. The study suggests that the Bishnupur area has an arsenic contamination problem, which is expected to increase in the near future.  相似文献   

Surface and groundwater quality characterization of Deoria District,Ganga Plain,India   总被引：5，自引：5，他引：0  

Vikram Bhardwaj  Dhruv Sen Singh 《Environmental Earth Sciences》2011,63(2):383-395

A water quality investigation was carried out in the Deoria district, Ganga plain, to assess the suitability of surface and groundwaters for domestic, agricultural, and industrial purposes. As much as 50 representative samples from river and groundwater were collected from various stations to monitor the water chemistry of various ions, comprising Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃ ⁻, SO₄ ²⁻, NO₃ ⁻, Cl⁻, F⁻, and trace metals, such as Fe, Cu, Mn, Zn, Cd, and Pb. The results showed that electrical conductance (EC), total dissolved solids (TDS), HCO₃ ⁻, Mg²⁺, Na⁺, and total hardness (TH) are above the maximum desirable limit, and apart from Fe and Mn all other trace metals are within the maximum permissible limit for drinking water. The calculated values for sodium absorption ratio (SAR), salinity, residual sodium carbonate (RSC), and permeability index (PI) indicate well to permissible use of water for irrigation. High values of Na%, RSC, and Mg-hazard (MH) at some stations restrict its use for agricultural purpose. Anthropogenic activities affect the spatial variation of water quality. Economic and social developments of the study area is closely associated with the characteristics of the hydrological network.  相似文献   

Machine learning techniques applied to prediction of residual strength of clay   总被引：1，自引：0，他引：1  

Sarat Kumar Das  Pijush Samui  Shakilu Zama Khan  Nagarathnam Sivakugan 《Central European Journal of Geosciences》2011,3(4):449-461

Stability with first time or reactivated landslides depends upon the residual shear strength of soil. This paper describes prediction of the residual strength of soil based on index properties using two machine learning techniques. Different Artificial Neural Network (ANN) models and Support Vector Machine (SVM) techniques have been used. SVM aims at minimizing a bound on the generalization error of a model rather than at minimizing the error on the training data only. The ANN models along with their generalizations capabilities are presented here for comparisons. This study also highlights the capability of SVM model over ANN models for the prediction of the residual strength of soil. Based on different statistical parameters, the SVM model is found to be better than the developed ANN models. A model equation has been developed for prediction of the residual strength based on the SVM for practicing geotechnical engineers. Sensitivity analyses have been also performed to investigate the effects of different index properties on the residual strength of soil.  相似文献   

Measurement and modeling of bed shear stress under solitary waves   总被引：1，自引：0，他引：1  

Jaya Kumar Seelam  Paul A. Guard  Tom E. Baldock 《Coastal Engineering》2011

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.  相似文献