In this work the development and the application of an operational management tool for the Greek Seas is described. This tool consists of a three-dimensional floating pollutant prediction model coupled with a weather, a hydrodynamic and a wave model in order to track the movements and the spreading of the pollutants and indicate those coastal areas which might be affected. The tool is part of the Poseidon system which has been designed to provide real time data and forecasts for marine environmental conditions in the Greek Seas. In this paper, we present four case studies based on realistic scenarios that show the value of the application for long-term strategic planning and short-term decision making in oil spill accidents. 相似文献
The mechanical model for plane strain, time-harmonic seismic wave propagation problems in cracked, multi-layered geological regions with surface topography and non-parallel interfaces was described in the first part of this work. Here, this model is used to investigate the response of such a region to the presence of traveling elastic waves generated by a seismic source. The computational methodology that was developed in the first part is based on a combination of both the regular (displacement-based) and the hypersingular (traction-based) Boundary Integral Equation Method (BIEM). First, the accuracy and convergence characteristics of this hybrid BIEM are studied. Then, a series of problems involving four different configurations of a reference geological deposit with both interface and internal cracks are solved, for a loading that is due to a seismically-induced pressure wave propagating upwards from the underlying rigid half-plane. The purpose of the numerical study is to investigate the influence of various key parameters of the problem, such as frequency and incidence angle of the incoming wave, size of the surface relief, location and size of the buried cracks, interaction effects between cracks and finally the presence of layers, on both the scattered displacement field and the stress concentration field. 相似文献
Hydraulic properties of deeply weathered basement rocks and variably weathered sedimentary materials were measured by pumping and slug-test methods. Results from over 200 bores in 13 catchments, and eight pumping-test sites across the eastern and central wheatbelt of Western Australia were analysed. Measurements were made in each of the major lithological units, and emphasis placed on a ubiquitous basal saprolite aquifer. Comparisons were made between alternative drilling and analytical procedures to determine the most appropriate methods of investigation.
Aquifers with an average hydraulic conductivity of 0.55 m day−1 occur in variably weathered Cainozoic sediments and poorly weathered saprolite grits (0.57 m day−1). These aquifers are separated by an aquitard (0.065 m day−1) comprising the mottled and pallid zones of the deeply weathered profile. Locally higher values of hydraulic conductivity occur in the saprolite aquifer, although after prolonged periods of pumping the values decrease until they are similar to those obtained from the slug-test methods. Hydraulic conductivities measured in bores drilled with rotary auger rigs were approximately an order of magnitude lower than those measured in the same material with bores drilled by the rotary air-blast method.
Wheatbelt aquifers range from predominantly unconfined (Cainozoic sediments), to confined (saprolite grit aquifer). The poorly weathered saprolite grit aquifer has moderate to high transmissivities (4–50 m2 day−1) and is capable of producing from less than 5 to over 230 kl day−1 of ground water, which is often of a quality suitable for livestock. Yields are influenced by the variability in the permeability of isovolumetrically weathered materials from which the aquifer is derived.
The overlying aquitard has a low transmissivity (< 1 m2 day−1), especially when deeply weathered, indurated and silicified. The transmissivity of the variably weathered sedimentary materials ranges from less than 0.5 m2 day−1 to over 10 m2 day−1, depending on the texture of the materials and their position within the landscape. Higher transmissivity zones may occur as discrete layers of coarser textured materials. The salinity of the saprolite and sedimentary aquifers ranges from less than 2000 mgl−1 to greater than 250000 mgl−1 (total dissolved solids; TDS), depending on position within the landscape. Secondary soil salinization develops when groundwater discharge occurs from either saprolite or sedimentary aquifers. 相似文献
The dielectric constants and dielectric loss values of 4 Ca-containing minerals were determined at 1 MHz using a two-terminal method and empirically determined edge corrections. The results are: vesuvianitel κ′a=9.93 tan δ=0.006 κ′c=9.79 tan δ=0.005 vesuvianitel κ′a=10.02 tan δ=0.002 κ′c=9.85 tan δ=0.003 zoisite1 κ′a =10.49 tan δ=0.0006 κ′b =15.31 tan δ=0.0008 κ′c=9.51 tan δ=0.0008 zoisite2 κ′a =10.55 tan δ=0.0011 κ′b =15.45 tan δ=0.0013 κ′c=9.39 tan δ=0.0008 epidote κ′11= 9.52 tan δ=0.0008 κ′22=17.1 tan δ=0.0009 κ′33= 9.37 tan δ=0.0006 fluorapatite1 κ′a =10.48 tan δ=0.0008 κ′c= 8.72 tan δ=0.0114 fluorapatite2 κ′a =10.40 tan δ=0.0010 κ′c=8.26 tan δ=0.0178 The deviation (δ) between measured dielectric polarizabilities as determined from the Clausius-Mosotti equation and those calculated from the sum of oxide polarizabilities according to αD (mineral)=∑ αD (oxides) for vesuvianite is ~ 0.5%. The large deviations of epidote and zoisite from the additivity rule with Δ=+ 10.1 and + 11.7%, respectively, are attributed to “rattling” Ca ions. The combined effects of both a large F thermal parameter and possible F-ion conductivity in fluorapatite are believed to be responsible for Δ=+2–3%. Although variation of oxygen polarizability with oxygen molar volume (Vo) is believed to affect the total polarizabilities, the variation of Vo in these Ca minerals is too small to observe the effect. 相似文献
As part of a joint Sino-U.S. research project to study the deep structure of the Tibetan Plateau, 11 broadband digital seismic
recorders were deployed on the Plateau for one year of passive seismic recording. In this report we use teleseimic P waveforms
to study the seismic velocity structure of crust and upper mantle under three stations by receiver function inversion. The
receiver function is obtained by first rotating two horizontal components of seismic records into radial and tangential components
and then deconvolving the vertical component from them. The receiver function depends only on the structure near the station
because the source and path effects have been removed by the deconvolution. To suppress noise, receiver functions calculated
from events clustered in a small range of back-azimuths and epicentral distances are stacked. Using a matrix formalism describing
the propagation of elastic waves in laterally homogeneous stratified medium, a synthetic receiver function and differential
receiver functions for the parameters in each layer can be calculated to establish a linearized inversion for one-dimensional
velocity structure.
Preliminary results of three stations, Wen-quan, Golmud and Xigatze (Coded as WNDO, TUNL and XIGA), located in central, northern
and southern Plateau are given in this paper. The receiver functions of all three stations show clear P-S converted phases.
The time delays of these converted phases relative to direct P arrivals are: WNDO 7.9s (for NE direction) and 8.3s (for SE
direction), TUNL 8.2s, XIGA 9.0s. Such long time delays indicate the great thickness of crust under the Plateau. The differences
between receiver function of these three station shows the tectonic difference between southern and north-central Plateau.
The waveforms of the receiver functions for WNDO and TUNL are very simple, while the receiver function of XIGA has an additional
midcrustal converted phase. The S wave velocity structures at these three stations are estimated from inversions of the receiver
function. The crustal shear wave velocities at WNDO and TUNL are vertically homogeneous, with value between 3.5–3.6 km/s down
to Moho. This value in the lower crust is lower than the normal value for the lower crust of continents, which is consistent
with the observed strong Sn attenuation in this region. The velocity structure at XIGA shows a velocity discontinuity at depth
of 20 km and high velocity value of 4.0 km/s in the midcrust between 20–30 km depth. Similar results are obtained from a DSS
profile in southern Tibet. The velocity under XIGA decreases below a depth of 30 km, reaching the lowest value of 3.2 km/s
between 50–55 km. depth. This may imply that the Indian crust underthrusts the low part of Tibetan crust in the southern Plateau,
forming a “double crust”. The crustal thickness at each of these sites is: WNDO, 68 km; TUNL, 70 km; XI-GA, 80 km.
The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, Supp., 581–592, 1992. 相似文献
Two sections of Triassic carbonate rocks were investigated by means of energy-index logs (EI logs). Three more terms are applied here in addition to the well-known terminology: EI log of the energy minima (EI logmin), EI log of the energy maxima (EI logmax) and differential EI field (DEI field). Characteristics of the EI classification parameters for the Upper Anisian, Ladinian and Carnian carbonate rocks are provided. Their EI classification comprises four types and twelve subtypes of limestones. The application of this classification established eight complete energy cycles (according to the scale chosen). The comparison of the EI logs of the two sections showed certain differences only in the detailed configuration of the cycles. This is due to lateral alternations in the beds. The general energy evolution trend of the two sections is identical. The dolomite formation during the Norian was preceded by rapid lowering of the energy levels in the upper part of the Carnian. The ostracods and foraminifers are related to the lowest energy levels, whereas the crinoids, brachiopods, bryozoans and thickshelled pelecypods are related to the medium and high energy levels. 相似文献
Six crystalline mixtures, picrite, olivine-rich tholeiite, nepheline basanite, alkali picrite, olivine-rich basanite, and olivine-rich alkali basalt were recrystallized at pressures to 40 kb, and the phase equilibria and sequences of phases in natural basaltic and peridotitic rocks were investigated.The picrite was recrystallized along the solidus to the assemblages (1) olivine+orthopyroxene+ clinopyroxene +plagioclase+spinel below 13 kb, (2) olivine+orthopyroxene+clinopyroxene+spinel between 13 kb and 18 kb, (3) olivine+orthopyroxene+clinopyroxene+ garnet+spinel between 18 kb and 26 kb, and (4) olivine+clinopyroxene+garnet above 26 kb. The solidus temperature at 1 atm is slightly below 1,100° and rises to 1,320° at 20 kb and 1,570° at 40 kb. Olivine is the primary phase crystallizing from the melt at all pressures to 40 kb.The olivine-rich tholeiite was recrystallized along the solidus into the assemblages (1) olivine+ clinopyroxene+plagioclase+spinel below 13 kb, (2) clinopyroxene+orthopyroxene+ spinel between 13 kb and 18 kb, (3) clinopyroxene+garnet+spinel above 18 kb. The solidus temperature is slightly below 1,100° at 1 atm, 1,370° at 20 kb, and 1,590° at 40 kb. The primary phase is olivine below 20 kb but is orthopyroxene at 40 kb.In the nepheline basanite, olivine is the primary phase below 14 kb, but clinopyroxene is the first phase to appear above 14 kb. In the alkali-picrite the primary phase is olivine to 40 kb. In the olivine-rich basanite, olivine is the primary phase below 35 kb and garnet is the primary phase above 35 kb. In the olivine-rich alkali basalt the primary phase is olivine below 20 kb and is garnet at 40 kb.Mineral assemblages in a granite-basalt-peridotite join are summarized according to reported experimental data on natural rocks. The solidus of mafic rock is approximately given by T=12.5 PKb+1,050°. With increasing pressure along the solidus, olivine disappears by reaction with plagioclase at 9 kb in mafic rocks and plagioclase disappears by reaction with olivine at 13 kb in ultramafic rocks. Plagioclase disappears at around 22 kb in mafic rocks, but it persists to higher pressure in acidic rocks. Garnet appears at somewhat above 18 kb in acidic rocks, at 17 kb in mafic rocks, and at 22 kb in ultramafic rocks.The subsolidus equilibrium curves of the reactions are extrapolated according to equilibrium curves of related reactions in simple systems. The pyroxene-hornfels and sanidinite facies is the lowest pressure mineral facies. The pyroxene-granulite facies is an intermediate low pressure mineral facies in which olivine and plagioclase are incompatible and garnet is absent in mafic rocks. The low pressure boundary is at 7.5 kb at 750° C and at 9.5 kb at 1,150° C. The high pressure boundary is 8.0 kb at 750° C and 15.0 kb at 1,150° C. The garnet-granulite facies is an intermediate high pressure facies and is characterized by coexisting garnet and plagioclase in mafic rocks. The upper boundary is at 10.3 kb at 750° C and 18.0 kb at 1,150° C. The eclogite facies is the highest pressure mineral facies, in which jadeite-rich clinopyroxene is stable.Compositions of minerals in natural rocks of the granulite facies and the eclogite facies are considered. Clinopyroxenes in the granulite-facies rocks have smaller jadeite-Tschermak's molecule ratios and higher amounts of Tschermak's molecule than clinopyroxenes in the eclogite-facies rocks. The distribution coefficients of Mg between orthopyroxene and clinopyroxene are normally in the range of 0.5–0.6 in metamorphic rocks in the granulite facies. The distribution coefficients of Mg between garnet and clinopyroxene suggest increasing crystallization temperature of the rocks in the following order: eclogite in glaucophane schist, eclogite and granulite in gneissic terrain, garnet peridotite, and peridotite nodules in kimberlite.Temperatures near the bottom of the crust in orogenic zones characterized by kyanitesillimanite metamorpbism are estimated from the mineral assemblages of metamorphic rocks in Precambrian shields to be about 700° C at 7 kb and 800° C at 9 kb, although heat-flow data suggest that the bottom of Precambrian shield areas is about 400° C and the eclogite facies is stable.The composition of liquid which is in equilibrium with peridotite is estimated to be close to tholeiite basalt at the surface pressure and to be picrite at around 30 kb. The liquid composition becomes poorer in normative olivine with decreasing pressure and temperature.During crystallization at high pressure, olivine and orthopyroxene react with liquid to form clinopyroxene, and a discontinuous reaction series, olivine orthopyroxene clinopyroxene is suggested. By fractional crystallization of pyroxenes the liquid will become poorer in SiO2. Therefore, if liquid formed by partial melting of peridotite in the mantle slowly rises maintaining equilibrium with the surrounding peridotite, the liquid will become poorer in MgO by crystallization of olivine, and tholeiite basalt magma will arrive at the surface. On the other hand, if the liquid undergoes fractional crystallization in the mantle, the liquid may change in composition to alkali-basalt magma and alkali-basalt volcanism may be seen at a late stage of volcanic activity.Publication No. 681, Institute of Geophysics and Planetary Physics, University of California, Los Angeles. 相似文献