Seismic Passive Earth Pressure on Walls with Bilinear Backface Using Pseudo-Dynamic Approach     

Sreevalsa Kolathayar  Priyanka Ghosh 《Geotechnical and Geological Engineering》2011,29(3):307-317

By using pseudo-dynamic approach, a method has been proposed in this paper to compute the seismic passive earth pressure behind a rigid cantilever retaining wall with bilinear backface. The wall has sudden change in inclination along its depth and a planar failure surface has been considered behind the retaining wall. The effects of a wide range of parameters like soil friction angle, wall inclination, wall friction angle, amplification of vibration, variation of shear modulus and horizontal and vertical seismic accelerations on the passive earth pressure have been explored in the present study. For the sake of illustration, the computations have been exclusively carried out for constant wall friction through out the depth. Unlike the Mononobe-Okabe method, which incorporates pseudo-static analysis, the present analysis predicts a nonlinear variation of passive earth pressure along the wall.  相似文献   

Variation in groundwater levels and water quality in Chhatna Block, Bankura district, West Bengal — a GIS approach     

S. K. Nag  P. Ghosh 《Journal of the Geological Society of India》2013,81(2):261-280

Ground water levels and quality in Chhatna Block of West Bengal were studied based on different indices for irrigation and drinking purposes. A detailed hydrogeological investigation was carried out to have an overall idea of the aquifer system of the area. The ground water occurs under shallow to moderately deep water table condition. The groundwater is stored mostly in the weathered residuum and fractured — hard rock. Sodium absorption ratio (SAR), soluble sodium percentage (SSP), residual sodium bi-carbonate (RSBC), electrical conductance (EC), magnesium adsorption ratio (MAR) Kelly’s ratio (KR), total hardness (TH), permeability index (PI) were calculated as derived parameters, to investigate the ionic toxicity. From the results of chemical analysis, it was revealed that the values of Sodium Adsorption Ratio indicate that, ground water of the area falls under the category of low sodium hazard. So, there was neither salinity nor toxicity problem of irrigation water, and hence the ground water can safely be used for long-term irrigation. Plotting of analytical results of the groundwater collected from different areas in Piper’s trilinear diagram (1944) indicate that, the waters of the study area fall under fresh and sulphate rich region of the rhombus.  相似文献   

Petromineralogic and rock magnetic aspects of clastic sedimentation in the Surma basin, Mizoram     

A. G. Badekar  S. J. Sangode  Sumit K. Ghosh  R. P. Tiwari  D. C. Meshram  J. Malsawma  P. Lalnuntluanga 《Journal of the Geological Society of India》2013,82(1):23-37

We present here comprehensive petromineralogic, mineral magnetic and lithologic observations from five stratigraphic sections representing the Barail Group, Middle and Upper units of Bhuban Formation, Bokabil Formation and Tipam Group in the Mizoram area. These stratigraphic units mainly display interplay of the grey and buff colored sandstones of the clast compositions varying from sub-lithic to lithic arenites (Q₇₉F₄L₁₇ to Q₅₅F₃L₄₂) including sedimentary, meta-sedimentary and subordinate igneous rock fragments. The buff sandstones with higher lithic fragments [Q₆₉F₄L₂₇ (Ls₆₁Lm₃₈Lv₁)] are dominated by recycled components with higher clast angularity (VA₁A₁₅SA₅₁SR₂₄R₈WR_0.4) relative to the grey sandstones. Mineral magnetic studies decipher bimodal (ferri- and antiferromagnetic) mineralogy with higher concentration in buff sandstones relative to the unimodal ferrimagnetic nature of the grey sandstones. The study infers that the buff sandstones mark the regressive phases driven by hinterland uplifts; whereas the growth of the grey sandstone facies is marked by transgressive basinal processes. Gradual increase in the frequency and appearance of the buff sandstones in the Surma stratigraphy, therefore, can be related to the evolution of the Indo-Burmese ranges.  相似文献   

Analysis of long-term ozone trend over Delhi and its meteorological adjustment   总被引：1，自引：0，他引：1  

S. Kumari  G. Jayaraman  C. Ghosh 《International Journal of Environmental Science and Technology》2013,10(6):1325-1336

Present study deals with the statistical analysis of long-term ground level ozone (O₃) trend and the influence of meteorological variables on its variation over Delhi, India. Daily mean and maximum of O₃ and meteorological data, obtained from India Meteorological Department, were arranged for the period of 9 years (1998–2006). Based on the preliminary correlation study of all the data with O₃, six variables viz. daily maximum temperature, daily average relative humidity, dew point, wind speed, visibility, and total sunshine were selected. Classical additive time series decomposition technique was used to obtain seasonally adjusted long-term trend. To analyze the masking effect of meteorology, adjustment was made using Kolmogorov–Zurbenko filters followed by stepwise regression analysis to the smoothed series of O₃ maximum and meteorological variables, which showed that long-term trend was independent of sunshine duration. Results indicate a significant increasing trend with annual increase of 1.13 % for O₃ mean and 3 % for O₃ maximum. Annual deseasonalized trend for seasonal cycle shows bimodal oscillations. About 43 % of O₃ variation was explained by the selected meteorological factors and rest of variation attributed to factors like emission of precursor gases, pollutant transport, policy changes, etc. Among the three tested regression models, performance of Model 2 with variable temperature, wind speed, and visibility was found to be best that resulted in lowering of O₃ trend. Large variability (23 %) was explained by the variable visibility depicted that the emission of primary pollutants not only provides the precursor gases but also control the local photochemical reactions.  相似文献   

Reconstruction of the layer anisotropic elastic parameters and high-resolution fracture characterization from P-wave data: a case study using seismic inversion and Bayesian rock physics parameter estimation   总被引：2，自引：0，他引：2  

Ran Bachrach  Mita Sengupta  Antoun Salama  Paul Miller 《Geophysical Prospecting》2009,57(2):253-262

Wide-azimuth seismic data can be used to derive anisotropic parameters on the subsurface by observing variation in subsurface seismic response along different azimuths. Layer-based high-resolution estimates of components of the subsurface anisotropic elastic tensor can be reconstructed by using wide-azimuth P-wave data by combining the kinematic information derived from anisotropic velocity analysis with dynamic information obtained from amplitude versus angle and azimuth analysis of wide-azimuth seismic data. Interval P-impedance, S-impedance and anisotropic parameters associated with anisotropic fracture media are being reconstructed using linearized analysis assuming horizontal transverse anisotropy symmetry. In this paper it is shown how additional assumptions, such as the rock model, can be used to reduce the degrees of freedom in the estimation problem and recover all five anisotropic parameters. Because the use of a rock model is needed, the derived elastic parameters are consistent with the rock model and are used to infer fractured rock properties using stochastic rock physics inversion. The inversion is based on stochastic rock physics modelling and maximum a posteriori estimate of both porosity and crack density parameters associated with the observed elastic parameters derived from both velocity and amplitude versus angle and azimuth analysis. While the focus of this study is on the use of P-wave reflection data, we also show how additional information such as shear wave splitting and/or anisotropic well log data can reduce the assumptions needed to derive elastic parameter and rock properties.  相似文献   

Estimation of hysteretic energy demand using concepts of modal pushover analysis   总被引：1，自引：0，他引：1  

Tholen Prasanth  Siddhartha Ghosh  Kevin R. Collins 《地震工程与结构动力学》2008,37(6):975-990

Hysteretic energy dissipation in a structure during an earthquake is the key factor, besides maximum displacement, related to the amount of damage in it. This energy demand can be accurately computed only through a nonlinear time‐history analysis of the structure subjected to a specific earthquake ground acceleration. However, for multi‐story structures, which are usually modeled as multi‐degree of freedom (MDOF) systems, this analysis becomes computation intensive and time consuming and is not suitable for adopting in seismic design guidelines. An alternative method of estimating hysteretic energy demand on MDOF systems is presented here. The proposed method uses multiple ‘generalized’ or ‘equivalent’ single degree of freedom (ESDOF) systems to estimate hysteretic energy demand on an MDOF system within the context of a ‘modal pushover analysis’. This is a modified version of a previous procedure using a single ESDOF system. Efficiency of the proposed procedure is tested by comparing energy demands based on this method with results from nonlinear dynamic analyses of MDOF systems, as well as estimates based on the previous method, for several ground motion scenarios. Three steel moment frame structures, of 3‐, 9‐, and 20‐story configurations, are selected for this comparison. Bias statistics that show the effectiveness of the proposed method are presented. In addition to being less demanding on the computation time and complexity, the proposed method is also suitable for adopting in design guidelines, as it can use response spectra for hysteretic energy demand estimation. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Aeromagnetic study of peninsular India     

P. Harikumar  Mita Rajaram  T. S. Balakrishnan 《Journal of Earth System Science》2000,109(3):381-391

The degree sheet Aeromagnetic maps up to 17‡N, acquired from the Geological Survey of India, have been manually redigitised at 6 minute intervals to study the long wavelength anomalies over peninsular India. These data have been collected at different survey altitude, epochs, flight line directions, etc. Great care has been taken to correct the total field map and remove the contribution due to the core field and prepare an accurate crustal anomaly map. For the first time, a regional map, depicting the NW-SE structural features north of the orthopyroxene isograd with the essentially E-W features to the south of it and revealing several well known structures, is presented. The analytical signal is calculated to delineate the source fields of these anomalies. It dramatically maps the charnockites and is able to delineate the orthopyroxene isograd. In the Dharwar region the magnetic signatures are associated with the intrusives/ iron ore bodies. Thus, we find that the source rocks of the aeromagnetic anomalies are the host province of charnockites in the SGT and the intrusives/iron ore bodies in the Dharwar belt. Gravity residuals are calculated and a tectonic map of the region is presented from the combined geopotential data.  相似文献   

The structure of black hole magnetospheres I. Schwarzschild black holes     

Pranab Ghosh 《Monthly notices of the Royal Astronomical Society》2000,315(1):89-97

We introduce a multipolar scheme for describing the structure of stationary, axisymmetric, force-free black hole magnetospheres in the '3+1' formalism. We focus here on Schwarzschild spacetime, giving a complete classification of the separable solutions of the stream equation. We show a transparent term-by-term analogy of our solutions with the familiar multipoles of flat-space electrodynamics. We discuss electrodynamic processes around disc-fed black holes in which our solutions find natural applications: (i) 'interior' solutions in studies of the BlandfordZnajek process of extracting the rotational energy of holes, and of the formation of relativistic jets in active galactic nuclei and 'microquasars'; (ii) 'exterior' solutions in studies of accretion disc dynamos, disc-driven winds and jets. On the strength of existing numerical studies, we argue that the poloidal field structures found here are also expected to hold with good accuracy for rotating black holes, except for the cases of the maximum possible rotation rates. We show that the closed-loop exterior solutions found here are not in contradiction with the MacdonaldThorne theorem, as these solutions, which diverge logarithmically on the horizon of the hole , only apply to those regions that exclude .  相似文献   

Spatio‐temporal prediction of land surface temperature using semantic kriging     

Shrutilipi Bhattacharjee  Jia Chen  Soumya K. Ghosh 《Transactions in GIS》2020,24(1):189-212

Spatio‐temporal prediction and forecasting of land surface temperature (LST) are relevant. However, several factors limit their usage, such as missing pixels, line drops, and cloud cover in satellite images. Being measured close to the Earth's surface, LST is mainly influenced by the land use/land cover (LULC) distribution of the terrain. This article presents a spatio‐temporal interpolation method which semantically models LULC information for the analysis of LST. The proposed spatio‐temporal semantic kriging (ST‐SemK) approach is presented in two variants: non‐separable ST‐SemK (ST‐SemK_NSep) and separable ST‐SemK (ST‐SemK_Sep). Empirical studies have been carried out with derived Landsat 7 ETM+ satellite images of LST for two spatial regions: Kolkata, India and Dallas, Texas, U.S. It has been observed that semantically enhanced spatio‐temporal modeling by ST‐SemK yields more accurate prediction results than spatio‐temporal ordinary kriging and other existing methods.  相似文献   

On the possible origin of troilite‐metal nodules in the Katol chondrite (L6‐7)          下载免费PDF全文

Dwijesh Ray  S. Ghosh  S.V.S. Murty 《Meteoritics & planetary science》2017,52(1):72-88

Microtextural study of a single troilite‐metal nodule (TMN) from the Katol L6‐7 chondrite, a recent fall (May, 2012) in India suggests that the TMN is primarily an aggregate of submicron‐scale intergrowth of troilite and kamacite (mean Ni: 6.18 wt%) juxtaposed with intensely fractured silicates, mainly olivine (Fa: 25 mole%), low‐Ca pyroxene (Fs: 21.2 mole%), and a large volume of maskelynite. Evidence of shock textures in the TMN indicates a high degree of shock metamorphism that involves plagioclase‐maskelynite and olivine‐wadsleyite/ringwoodite transformations and formation of quenched metal‐sulfide melt textures due to localized shear‐induced frictional melting. It is inferred that the TMN formation is an independent, localized event by a high energy impact and its subsequent incorporation in the ejected chondritic fragment of the parent body. Katol chondrite has been calibrated with a peak shock pressure of S5 (~45 GPa) after Stöffler et al. (1991), whereas peak shock pressure within the TMN exceeds the shock facies S6 (>45 GPa) following Bennett and McSween (1996) and Stöffler et al. (1991). Overall, the shock‐thermal history of the Katol TMN is dissimilar as compared to the host chondrite.  相似文献