Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses   总被引：9，自引：0，他引：9  

Stephen M. Eggins 《Geostandards and Geoanalytical Research》2003,27(2):147-162

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.  相似文献   

The effects of pH, ionic strength, and iron-fulvic acid interactions on the kinetics of non-photochemical iron transformations. II. The kinetics of thermal reduction     

Michael J Pullin  Stephen E Cabaniss 《Geochimica et cosmochimica acta》2003,67(21):4079-4089

A combination of flow-injection analysis and kinetic analysis was used to examine the speciation of iron(II) and iron(III) in fulvic acid solutions as a function of pH, ionic strength, and time. This methodology was used to follow a shift in iron speciation from faster to slower reacting species over a timescale of several days. This speciation data shows that both iron(II) and iron(III)-fulvic acid complexes are important iron species in humic-containing natural waters and that their amounts and their rates of transformation to colloidal iron are controlled primarily by the kinetics of thermal (dark) reduction and iron(II) oxidation. The kinetic analysis methodology also yielded the rate constants for the thermal reduction of iron by the fulvic acid. These rate constants decrease with increasing pH and are independent of ionic strength. While thermal reduction was found to be too slow to produce large amounts of steady state iron(II) at circumneutral pH, it does provide a mechanism for iron redox cycling in the absence of photochemical or biochemical processes.  相似文献   

Naturally precipitating vaterite (μ-CaCO₃) spheres: unusual carbonates formed in an extreme environment     

Stephen E Grasby 《Geochimica et cosmochimica acta》2003,67(9):1659-1666

Vaterite, a rare hexagonal CaCO₃ polymorph, was identified in precipitates forming at a supraglacial sulfur spring, in Borup Fiord Pass, northern Ellesmere Island, Canadian High Arctic. Vaterite occurs in a precipitate mound along with calcite, gypsum, and native sulfur. The unusual conditions of the site, including an extremely cold climate, supersaturated alkaline waters, and the presence of gypsum, mimics conditions used to grow vaterite in laboratory experiments. Stable isotope data suggest that vaterite may preferentially form during colder periods of the year. Vaterite found at the site is characterized by 2- to 10-μm rounded to spherical shaped particles (comprising smaller 0.5- to 2-μm spheres) as both individuals and in chainlike structures. The spherical habit of vaterite resembles carbonate structures that have been interpreted to be organic; however, δ¹³C values are indicative of an inorganic origin. The thick permafrost, and the extreme cold and dry environment make this site a good terrestrial analog for carbonate precipitates that might be expected at potential deposits associated with water discharge on other planetary bodies.  相似文献   

Analysis of Re, Au, Pd, Pt and Rh in NIST Glass Certified Reference Materials and Natural Basalt Glasses by Laser Ablation ICP-MS   总被引：1，自引：0，他引：1  

Paul J. Sylvester  Stephen M. Eggins 《Geostandards and Geoanalytical Research》1997,21(2):215-229

A new technique for the in situ analysis of Re, Au, Pd, Pt and Rh in natural basalt glass by laser ablation (LA)-ICP-MS is described. The method involves external calibration against NIST SRM 612/613 or 614/615 glass certified reference materials, internal standardisation using Ca, and ablation with a 200 μm wide beam spot and a pulsed laser repetition rate of 50 Hz. Under these conditions, sensitivities for Re, Au, Pd, Pt and Rh analyte ions are ˜ 5000 to 100,000 cps/μg g^-1. This is sufficient to make measurements precise to ˜ 10% at the 2-10 μg g^-1 level, which is well within the range of concentrations expected in many basalts. For LA-ICP-MS calibration and a demonstration of the accuracy of the technique, concentrations of Re, Au, Pd, Pt and Rh in the NIST SRM 610/611 (˜ 1 to 50 μg g^-1), 612/613 (˜ 1 to 7 μg g^-1), 614/615 (˜ 0.2 to 2 μg g^-1) and 616/617 (˜ 0.004 to 2 μg g^-1) glasses were determined by solution-nebulisation (SN)-ICP-MS. Using the 612/613 or 614/615 glasses as calibration standards, LA-ICP-MS measurements of these elements in the other NIST glasses fell within ˜ 15% of those determined by SN-ICP-MS. Replicate LA-ICP-MS analyses of the 612/613 and 614/615 glasses indicate that, apart from certain anomalous domains, the glasses are homogeneous for Re, Au, Pd, Pt and Rh to better than 3.5%. Two LA-ICP-MS analyses of natural, island-arc basalt glasses exhibit large fractionations of Re, Au and Pd relative to Pt and Rh, compared to the relative abundances in the primitive mantle.  相似文献   

Invariants in toroidal and tangentially geostrophic frozen-flux velocity fields     

Andrew Jackson  Raymond Hide 《Geophysical Journal International》1996,125(3):925-927

We derive two new types of invariant that must be obeyed by the radial magnetic field at the core-mantle boundary if the hypothesis of frozen flux is valid and the fluid motion is either toroidal or tangentially geostrophic there. These general invariants incorporate specific invariants that are already known and can, in principle, be tested using magnetic data that cover an interval of time.  相似文献   

Gaussian curvature and the relationship between the shape and the deformation of the Tonga slab     

Sarah Nothard  Dan McKenzie  John Haines  James Jackson 《Geophysical Journal International》1996,127(2):311-327

  相似文献   

Petrogenesis of lavas from the AMAR Valley and Narrowgate region of the FAMOUS Valley, 36°–37°N on the Mid-Atlantic Ridge     

A. P. le Roex  Frederick A. Frey  Stephen H. Richardson 《Contributions to Mineralogy and Petrology》1996,124(2):167-184

Basaltic lavas from the AMAR Valley and the Narrowgate region of the FAMOUS Valley on the Mid-Atlantic Ridge (36° to 37°?N) range in texture from aphyric to highly plagioclase phyric (>25% large plagioclase phenocrysts). Based on ⁸⁷Sr/⁸⁶Sr and ¹⁴³Nd/¹⁴⁴Nd ratios, most of these lavas can be subdivided into two distinct, isotopically homogeneous, groups: Group I has lower ⁸⁷Sr/⁸⁶Sr (0.70288±1) and higher ¹⁴³Nd/¹⁴⁴Nd (0.51312±1) ratios; Group II has higher ⁸⁷Sr/⁸⁶Sr (0.70296±1) and lower ¹⁴³Nd/¹⁴⁴Nd (0.51309±2) ratios. Most Group II lavas are aphyric, whereas Group I lavas are primarily plagioclase phyric. Lavas from both groups show a wide range in incompatible element abundance ratios (e.g., Zr/Nb =6–29; (La/Sm)_n=0.6–1.7). Aphyric lavas have relatively constant Sc (40±1.5?ppm) abundances and CaO/Al₂O₃ ratios (0.80±0.02). Group I lavas are confined primarily to the AMAR rift valley floor whereas Group II lavas are found along the east and west marginal highs. We interpret the isotopic differences between the two groups as reflecting a temporal change in the upwelling mantle beneath this region of the Mid-Atlantic Ridge which is south of the Azore Islands. For each group, a petrogenetic model consistent with the geochemical data is multi-stage decompression melting of an initially enriched, homogeneous, mantle source region. If the early derived, incompatible-element enriched, melt increments are not always pooled with subsequent increments, the erupted magma batches may have the major element characteristics of melts derived by 10 to 20% melting, but with incompatible element abundance ratios reflecting the change from an enriched to depleted source during the incremental melting process. In this process an initially homogeneous source can generate primary magmas with the required range in incompatible element abundance ratios shown by each group. The nearly constant CaO/Al₂O₃ ratios and Sc contents of the aphyric lavas with decreasing Mg?? reflects subsequent polybaric fractionation of clinopyroxene, plagioclase and olivine over the pressure interval 8–6?kbar (24–18?km), followed by rapid transport to the surface and eruption. There is no geochemical evidence for a crustal magma chamber beneath this section of the Mid-Atlantic Ridge.  相似文献   

Characterisation of brown coal humic acids and modified humic acids using pyrolysis gcms and other techniques     

W. R. Jackson  G. D. Bongers  P. J. Redlich  G. Favas  Y. Fei  A. F. Patti  R. B. Johns 《International Journal of Coal Geology》1996,32(1-4)

It has been proposed that Victorian brown coal can be considered as a two-component structure — a lignocellulosic “host”, containing various amounts of weakly bound or entrapped “guest” material together with very small amounts of inorganic and/or mineral matter. The latter predominantly consists of wax esters and/or terpenoid material. In this paper we describe attempts to gain structural information regarding the more complex, “host” component of the coal. Our initial model compound has been humic acid that can be readily obtained from the coal by alkaline extraction. It has been found that “pure” humic acid, free from material associated with the “guest” components of the coal, can be obtained by a highly selective, low-yielding alkaline extraction. This humic acid has been studied by nmr spectroscopy and pyrolysis gas chromatography-mass spectroscopy (py-gc/ms). The products arising from py-gc/ms have been compared with those obtained from similar pyrolysis of whole coals. Alkylation of humic acids using alkyl halides in the presence of base has been successfully carried out and reactivity of the resulting materials compared with those of the parent coal and humic acid.  相似文献   

The normal grain growth behaviour of nominally pure calcitic aggregates     

Stephen J. Covey-Crump 《Contributions to Mineralogy and Petrology》1997,129(2-3):239-254

The normal grain growth behaviour of four different, but all nominally pure, calcite powders (99%+ analytic grade calcite, 99.7% chalk, 99.97% crushed Iceland Spar, 99.95%+ chelometric grade calcite) has been investigated as a function of temperature (550, 600, 650, 700 °C) and confining pressure (100, 190 MPa) under both “dry” and hydrostatic (P _fluid = P _total) conditions. The initial particle size of both the analytic grade and chelometric grade calcite was about 5 μm, and that of the chalk was about 3 μm, while the experiments on the Iceland Spar were conducted on powders of three different initial particle sizes (3.4, 7.5, 38.5 μm). On each material, at each pressure/temperature condition 6 to 15 experiments, equally spaced in log time from 15 minutes to 50 days, were conducted. Under dry conditions all four materials recrystallized to aggregates which contained less than 2% porosity and which had a grain size of between 4 and 20 μm (depending on the initial particle size). Subsequently the aggregates coarsened by normal grain growth, with the kinetics of the growth process being controlled by the rate at which the grain boundaries could drag the residual pores with them as they migrated. Under nominally identical conditions both the mechanism and rates of pore drag differed greatly for the different materials, implying that this process is highly sensitive to trace solute impurity concentrations. This sensitivity renders the task of providing a systematic account of dry calcite grain growth kinetics highly problematic. Under hydrostatic conditions all the powders followed the same normal grain growth kinetics in which the growth process was rate-controlled by diffusion through the pore fluid on the grain boundaries. An activation enthalpy of 162.6 kJ mol⁻¹ and an activation volume of 34.35 cm³ mol⁻¹ was obtained for this process. Received: 23 May 1996 / Accepted: 8 July 1997  相似文献   

Hydrochemical Evolution of Sodium-Sulfate and Sodium-Chloride Groundwater Beneath the Northern Chihuahuan Desert, Trans-Pecos, Texas, USA   总被引：15，自引：1，他引：15  

R. Stephen Fisher  William F. Mullican  III 《Hydrogeology Journal》1997,5(2):4-16

  相似文献