Incorporation of Cr<Superscript>3+</Superscript> in dickite: a spectroscopic study     

E. Balan  T. Allard  G. Morin  G. Calas 《Physics and Chemistry of Minerals》2002,29(4):273-279

 We have investigated a well-ordered sample of natural Cr-bearing dickite from Nowa Ruda (Lower Silesia, Poland) using electron paramagnetic resonance (EPR) at X- and Q-band frequencies (9.42 and 33.97 GHz, respectively) and optical diffuse reflectance spectroscopy. The observation of the spin-forbidden transitions at 15500 and 14690 cm⁻¹ allows us to unambiguously identify the major contribution of octahedrally coordinated Cr³⁺ ions in the optical spectrum. The X- and Q-band EPR spectra show two superposed Cr³⁺ signals. The corresponding fine-structure parameters were determined at room temperature and 145 K. These results suggest the substitution of Cr³⁺ for Al³⁺ in equal proportions in the two unequivalent octahedral sites of the dickite structure. In kaolin group minerals, the distortion around Cr³⁺ ions (λ≈ 0.2–0.4) in Al sites is significantly less rhombic than that observed around Fe³⁺ ions (λ≈ 0.6–0.8). Received: 29 June 2001 / Accepted: 22 October 2001  相似文献   

Low-temperature thermodynamic properties of disordered zeolites of the natrolite group     

I. E. Paukov  N. K. Moroz  Yu. A. Kovalevskaya  I. A. Belitsky 《Physics and Chemistry of Minerals》2002,29(4):300-306

 The heat capacity of paranatrolite and tetranatrolite with a disordered distribution of Al and Si atoms has been measured in the temperature range of 6–309 K using the adiabatic calorimetry technique. The composition of the samples is represented with the formula (Na_1.90K_0.22Ca_0.06)[Al_2.24Si_2.76O₁₀]·nH₂O, where n=3.10 for paranatrolite and n=2.31 for tetranatrolite. For both zeolites, thermodynamic functions (vibrational entropy, enthalpy, and free energy function) have been calculated. At T=298.15 K, the values of the heat capacity and entropy are 425.1 ± 0.8 and 419.1 ±0.8 J K⁻¹ mol⁻¹ for paranatrolite and 381.0 ± 0.7 and 383.2 ± 0.7 J K⁻¹ mol⁻¹ for tetranatrolite. Thermodynamic functions for tetranatrolite and paranatrolite with compositions corrected for the amount of extraframework cations and water molecules have also been calculated. The calculation for tetranatrolite with two water molecules and two extraframework cations per formula yields: C _p (298.15)=359.1 J K⁻¹ mol⁻¹, S(298.15) −S(0)=362.8 J K⁻¹ mol⁻¹. Comparing these values with the literature data for the (Al,Si)-ordered natrolite, we can conclude that the order in tetrahedral atoms does not affect the heat capacity. The analysis of derivatives dC/dT for natrolite, paranatrolite, and tetranatrolite has indicated that the water- cations subsystem within the highly hydrated zeolite may become unstable at temperatures above 200 K. Received: 30 July 2001 / Accepted: 15 November 2001  相似文献   

Isothermal annealing of partially metamict zircon: evidence for a three-stage recovery process     

T. Geisler 《Physics and Chemistry of Minerals》2002,29(6):420-429

 Raman spectroscopy and the powder diffraction technique have been used to monitor the recovery process of two partially metamict zircons (2.6 and 4.8 × 10¹⁸ α-decays g⁻¹) from Sri Lanka during a series of isothermal annealing experiments in the temperature range from 870 to 1622 K. These experiments show for the first time that structural recovery in partially metamict zircon proceeds via three distinct recovery stages, each of which occurs within a distinct time-temperature regime. Whereas the first two stages have previously been recognized (recovery of damaged crystalline remnants and epitaxial recrystallization), the third stage has not yet been identified as a single activated process. It is suggested that anisotropic defect annealing during the first stage at low temperatures, where the structure recovers preferentially along the a(b) plane, produces a geometrical situation where large structural rearrangements are necessary to remove the remaining defects inside the crystalline material. This situation is approximately reached when the amorphous domains start to recrystallize. The reason for anisotropic annealing can be found in a different connectivity between polyhedral linkages in both directions of the zircon lattice. High apparent activation energies, in the range of 6.4 to 7.9 eV, were determined for the third recovery stage from the Raman data, which are interpreted to reflect large structural rearrangements (i.e. polyhedral tilting) associated with the final recovery of the c axis. This explains the occurrence of a distinct recrystallization stage without defect annealing. Finally, it should be mentioned that the first recovery stage is not necessarily expected to occur in less damaged zircon crystals (<∼2 × 10¹⁸ α-decays g⁻¹), since less stable defects along the basal plane might have already been self-annealed during radiation damage accumulation under ambient temperatures. Received: 6 September 2001 / Accepted: 25 February 2002  相似文献   

A three-dimensional parametric study of the use of soil nails for stabilising tunnel faces   总被引：4，自引：0，他引：4  

C. W. W. Ng  G. T. K. Lee 《Computers and Geotechnics》2002,29(8):673-697

Applying an effective nailing system at a tunnel heading, not only improves the stability of the tunnel heading and limits deformation at the tunnel face, but it also reduces volume loss during excavation and hence reduces ground surface settlement. The effectiveness of a soil nail system is affected by many factors such as the diameter and stiffness of the nails. In this paper, a systematic parametric study was conducted to study the axial rigidity of a nail, E_nA_n, for improving the stability of tunnel headings and reducing ground movements in stiff clay. The parametric study involved a series of three-dimensional elasto-plastic coupled-consolidation finite element analyses. The stability of the tunnel face is improved with increasing E_nA_n. For a given nail density applied at the tunnel face, an optimum axial rigidity of the nail (E_nA_n)_opt can be identified. The efficiency of the nailing system diminishes when (E_nA_n)_opt is reached. The use of a soil nailing system reduces the magnitude of stress relief at the tunnel heading during excavation. Thus, this reduction of stress relief minimises the amount of soil yielding and excess pore water pressure generated in the soil around the tunnel heading.  相似文献   

The role of an H<Subscript>2</Subscript>O-rich fluid component in the generation of primitive basaltic andesites and andesites from the Mt. Shasta region,N California   总被引：2，自引：1，他引：2  

T. Grove  S. Parman  S. Bowring  R. Price  M. Baker 《Contributions to Mineralogy and Petrology》2002,142(4):375-396

  相似文献   

Confinement Effects and Energy Balance Analyses for Buckling Failure Under Eccentric Loading Conditions     

V. N. Kazakidis 《Rock Mechanics and Rock Engineering》2002,35(2):115-126

  相似文献   

Intercomparison of IRS-P4-MSMR derived geophysical products with DMSP-SSM/I and TRMM-TMI finished products     

A. K. Varma  R. M. Gairola  A. K. Mathur  B. S. Gohil  Vijay K. Agarwal 《Journal of Earth System Science》2002,111(3):247-256

In this paper, MSMR geophysical products like Integrated Water Vapour (IWV), Ocean Surface Wind Speed (OWS) and Cloud Liquid Water (CLW) in different grids of 50, 75 and 150 kms are compared with similar products available from other satellites like DMSP-SSM/I and TRMMTMI. MSMR derived IWV, OWS and CLW compare well with SSM/I and TMI finished products. Comparison of MSMR derived CLW with that derived from TMI and SSM/I is relatively in less agreement. This is possibly due to the use of 37 GHz in SSM/I and TMI that is highly sensitive to CLW, while 37 GHz channels are not available on MSMR. Monthly comparison of MSMR geophysical products with those from TMI is all carried out for climatological purpose. The monthly comparisons were much better compared to instantaneous comparisons. In this paper, details of the data analysis and comparison results are presented. The usefulness of the MSMR vis-à-vis other sensors is also discussed.  相似文献   

Fluid-mobile trace element constraints on the role of slab melting and implications for Archaean crustal growth models   总被引：11，自引：0，他引：11  

Balz S. Kamber  Anthony Ewart  Kenneth D. Collerson  Michael C. Bruce  Graeme D. McDonald 《Contributions to Mineralogy and Petrology》2002,144(1):38-56

We use published and new trace element data to identify element ratios which discriminate between arc magmas from the supra-subduction zone mantle wedge and those formed by direct melting of subducted crust (i.e. adakites). The clearest distinction is obtained with those element ratios which are strongly fractionated during refertilisation of the depleted mantle wedge, ultimately reflecting slab dehydration. Hence, adakites have significantly lower Pb/Nd and B/Be but higher Nb/Ta than typical arc magmas and continental crust as a whole. Although Li and Be are also overenriched in continental crust, behaviour of Li/Yb and Be/Nd is more complex and these ratios do not provide unique signatures of slab melting. Archaean tonalite-trondhjemite-granodiorites (TTGs) strongly resemble ordinary mantle wedge-derived arc magmas in terms of fluid-mobile trace element content, implying that they did not form by slab melting but that they originated from mantle which was hydrated and enriched in elements lost from slabs during prograde dehydration. We suggest that Archaean TTGs formed by extensive fractional crystallisation from a mafic precursor. It is widely claimed that the time between the creation and subduction of oceanic lithosphere was significantly shorter in the Archaean (i.e. 20 Ma) than it is today. This difference was seen as an attractive explanation for the presumed preponderance of adakitic magmas during the first half of Earth's history. However, when we consider the effects of a higher potential mantle temperature on the thickness of oceanic crust, it follows that the mean age of oceanic lithosphere has remained virtually constant. Formation of adakites has therefore always depended on local plate geometry and not on potential mantle temperature.  相似文献   

Hydraulic Characteristics of Rough Fractures in Linear Flow under Normal and Shear Load   总被引：19，自引：3，他引：19  

H. S. Lee  T. F. Cho 《Rock Mechanics and Rock Engineering》2002,35(4):299-318

Summary A hydro-mechanical testing system, which is capable of measuring both the flow rates and the normal and shear displacement of a rock fracture, was built to investigate the hydraulic behaviour of rough tension fractures. Laboratory hydraulic tests in linear flow were conducted on rough rock fractures, artificially created using a splitter under various normal and shear loading. Prior to the tests, aperture distributions were determined by measuring the topography of upper and lower fracture surfaces using a laser profilometer. Experimental variograms of the initial aperture distributions were classified into four groups of geostatistical model, though the overall experimental variograms could be well fitted to the exponential model. The permeability of the rough rock fractures decayed exponentially with respect to the normal stress increase up to 5 MPa. Hydraulic behaviours during monotonic shear loading were significantly affected by the dilation occurring until the shear stress reached the peak strength. With the further dilation, the permeability of the rough fracture specimens increased more. However, beyond shear displacement of about 7 to 8 mm, permeability gradually reached a maximum threshold value. The combined effects of both asperity degradation and gouge production, which prohibited the subsequent enlargement of mean fracture aperture, mainly caused this phenomenon. Permeability changes during cyclic shear loading showed somewhat irregular variations, especially after the first shear loading cycle, due to the complex interaction from asperity degradations and production of gouge materials. The relation between hydraulic and mechanical apertures was analyzed to investigate the valid range of mechanical apertures to be applied to the cubic law. Received June 12, 2001; accepted February 26, 2002 Published online September 2, 2002  相似文献   

Chemical evolution and petrogenetic implications of loparite in the layered,agpaitic Lovozero complex,Kola Peninsula,Russia     

L. N. Kogarko  C. T. Williams  A. R. Woolley 《Mineralogy and Petrology》2002,74(1):1-24

Summary Lovozero, the largest of the world’s layered peralkaline intrusions, includes gigantic deposits of Nb + REE-loparite ore. Loparite, (Na,Ce,Ca)₂(Ti,Nb)₂O₆, became a cumulus phase after crystallisation of about 35% of the ‘Differentiated Complex’, and its compositional evolution has been investigated through a 2.35 km section of the intrusion. The composition of the cumulus loparite changes systematically upwards through the intrusion with an increase in Na, Sr, Nb and Th and decrease in REE and Ti. This main trend of loparite evolution records differentiation of the peralkaline magma through crystallisation of 1600 m of the intrusion. The formation of the loparite ores was the result of several factors including the chemical evolution of the highly alkaline magma and mechanical accumulation of loparite at the base of a convecting unit. At later stages of evolution, when concentrations of alkalis and volatiles reached very high levels, loparite reacted with the residual melt to form a variety of minerals including barytolamprophyllite, lomonosovite, steenstrupine-(Ce), vuonnemite, nordite, nenadkevichite, REE, Sr-rich apatite, vitusite-(Ce), mosandrite, monazite-(Ce), cerite and Ba, Si-rich belovite. The absence of loparite ore in the “Eudialyte complex” is likely to be a result of the wide crystallisation field of lamprophyllite, which here became a cumulus phase. Received November 6, 2000; revised version accepted January 18, 2001  相似文献