Terminal Proterozoic mid-shelf benthic microbial mats in the Centralian Superbasin and their environmental significance.   总被引：1，自引：0，他引：1  

G A Logan  C R Calver  P Gorjan  R E Summons  J M Hayes  M R Walter 《Geochimica et cosmochimica acta》1999,63(9):1345-1358

A combined sedimentological and biogeochemical study has been conducted on several Terminal Proterozoic mid-shelf microbial mat facies from the Centralian Super-basin. Isotopic and organic geochemical analysis of the bitumen and kerogen indicated that two sources of organic matter from 'planktonic' and 'benthic microbial-mat' populations contributed to the sediment. The 'planktonic' source provided a suite of n-alkanes with C20, whereas, the 'benthic' source contributed an overlay of n-alkanes >C20 with a strong even preference, together with mid-chain methyl alkanes. Kerogen and biomarkers derived from the microbial mat were found to be depleted in 13C relative to planktonic material. Pyrite in the microbial mats was also found to be depleted in 34S compared to surrounding facies. The combination of these observations suggested that the mats may have been at least partly composed of sulfide oxidising bacteria. These organisms have specific environmental tolerances that set limits on palaeo-environment. Their requirement for oxygen indicates that the water column above the mid-shelf could not have been anoxic. Accordingly, from the results and age determinations reported here, it would appear that mid-shelf environments of the Centralian Superbasin of Australia were seeing significant levels of oxygen through the Ediacarian.  相似文献   

Encircling the Peak of World Oil Production     

Duncan  Richard C.  Youngquist  Walter 《Natural Resources Research》1999,8(3):219-232

Natural Resources Research - The peak of world oil production, followed by an irreversible decline, will be a watershed in human history. The goal of this paper is to predict the world peak....  相似文献   

A Type-Curve Method for the Analysis of Pumping Tests with Piecewise-Linear Pumping Rates     

Chao Zhuang  Yabing Li  Zhifang Zhou  Walter A. Illman  Zhi Dou  Jinguo Wang  Long Yan 《Ground water》2020,58(5):788-798

Aquifer hydraulic parameters are commonly inferred from constant-rate pumping tests, while variable pumping rates are frequently encountered in actual field conditions. In this study, we propose a generally applicable dimensionless form of the analytical solution for variable-rate pumping tests in confined aquifers. In particular, we adopt a piecewise-linear fitting of variable pumping rates and propose a new type-curve method for estimating the hydraulic conductivity (K ) and specific storage (S_s ) of the investigated confined aquifer. For each test, a series of type curves, which depend on the variable pumping rates, the location of observation wells and the introduced first dimensionless inflection time, need to be provided for matching the observed drawdown data on a log-log graph. We first demonstrate the applicability and robustness of this method through a synthetic pumping test. Subsequently, we apply this method to analyze drawdown data from four pumping tests conducted within a multilayered aquifer/aquitard system in Wuxi city, Jiangsu Province, China. The parameter estimates are then compared with those reported by PEST. The K and S_s values estimated by the new type-curve method are found to be quite close to PEST-based estimates. Parameter estimation results demonstrate the difference in K and S_s values between observation wells. The difference could be attributed to the spatial heterogeneity in K and S_s . A future research topic may focus on the characterization of K and S_s heterogeneity with the currently available drawdown data from variable-rate pumping tests.  相似文献   

Can Euler deconvolution outline three-dimensional magnetic sources?     

Elizangela S. Amaral Mota  Walter E. Medeiros  Roberto G. Oliveira 《Geophysical Prospecting》2020,68(7):2271-2291

Severe limitations of the standard Euler deconvolution to outline source shapes have been pointed out. However, Euler deconvolution has been widely employed on field data to outline interfaces, as faults and thrust zones. We investigate the limitations of the 3D Euler deconvolution–derived estimates of source dip and volume with the use of reduced-to-the-pole synthetic and field anomalies. The synthetic anomalies are generated by two types of source bodies: (1) uniformly magnetized prisms, presenting either smooth or rough interfaces, and (2) bodies presenting smooth delimiting interfaces but strong internal variation of magnetization intensity. The dip of the first type of body might be estimated from the Euler deconvolution solution cluster if the ratio between the depth to the top and vertical extent is relatively high (>1/4). For the second type of body, besides dip, the source volume can be approximately delimited from the solution cluster envelope, regardless of the referred ratio. We apply Euler deconvolution to two field anomalies which are caused by a curved-shape thrust zone and by a banded iron formation. These anomalies are chosen because they share characteristics with the two types of synthetic bodies. For the thrust zone, the obtained Euler deconvolution solutions show spatial distribution allowing to estimate a source dip that is consistent with the surface geology data, even if the above-mentioned ratio is much less than 1/4. Thus, there are other factors, such as a heterogeneous magnetization, which might be controlling the vertical spreading of the Euler deconvolution solutions in the thrust zone. On the other hand, for the iron-ore formation, the solution cluster spreads out occupying a volume, in accordance with the results obtained with the synthetic sources having internal variation of magnetization intensity. As conclusion, although Euler deconvolution–derived solutions cannot offer accurate estimates of source shapes, they might provide a sufficient degree of reliability in the initial estimates of the source dip and volume, which may be useful in a later phase of more accurate modelling.  相似文献   

Channelization of a large Alpine river: what is left of its original morphodynamics?          下载免费PDF全文

Vittoria Scorpio  Simone Zen  Walter Bertoldi  Nicola Surian  Marco Mastronunzio  Elena Dai Prá  Guido Zolezzi  Francesco Comiti 《地球表面变化过程与地形》2018,43(5):1044-1062

The Adige River drains 12 200 km² of the Eastern Alps and flows for 213 km within this mountain range. Similar to other large rivers in Central Europe, the Adige River was subject to massive channelization works during the 19th century. Thanks to the availability of several historical maps, this river represents a very valuable case study to document the extent to which the morphology of the river changed due to channelization and to understand how much is left of its original morphodynamics. The study was based on the analysis of seven sets of historical maps dating from 1803–1805 to 1915–1927, on geomorphological analysis, on the application of mathematical morphodynamic theories and on the application of bar and channel pattern prediction models. The study concerns 115 km of the main stem and 29 km of its tributaries. In the pre‐channelization conditions, the Adige River presented a prevalence of single‐thread channel planforms. Multi‐thread patterns developed only immediately downstream of the main confluences. During the 19th century, the Adige underwent considerable channel adjustment, consisting of channel narrowing, straightening, and reduction of bars and islands. Multi‐thread and single‐thread reaches evolved through different evolutionary trajectories, considering both the channel width and the bar/vegetation interaction. Bar and channel pattern predictors showed good correspondence with the observed patterns, including the development of multi‐thread morphologies downstream of the confluences. Application of the free‐bar predictor helped to interpret the strong reduction – almost complete loss – of exposed sediment bars after the channelization works, quantifying the riverbed inclination to form alternate bars. This morphological evolution can be observed in other Alpine rivers of similar size and similar massive channelization, therefore, a simplified conceptual model for large rivers subjected to channelization is proposed, showing that a relatively small difference in the engineered channel width may have a strong impact on the river dynamics, specifically on bar formation. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Capturing the spatiotemporal variability of bedload transport: A time‐lapse imagery technique          下载免费PDF全文

Marco Redolfi  Luca Guidorizzi  Marco Tubino  Walter Bertoldi 《地球表面变化过程与地形》2017,42(7):1140-1147

Monitoring sediment transport in morphologically complex and labile channels remains a difficult task, even at the laboratory scale. To address this challenge, a fully automated imagery technique for continuously mapping the spatial and temporal variability of bedload transport is proposed. This method uses differentiated time‐lapse imagery taken from a fixed camera to detect bed variations induced by grain displacement. The technique is not based on tracking the individual particles; rather, it evaluates macroscopic colour changes within a region that contains several grains, which depend on the occurrence and intensity of the bedload transport. Image‐derived data were compared with the sediment flux measured during four flume experiments, and produced good correspondence. The method provides continuous tracking of the location of the transporting channels, and enables estimation of local variations in the magnitude of the bedload flux. Moreover, the spatial extent of the monitoring area offers an unprecedented opportunity to aggregate spatially dense and continuous data at the reach scale, as needed to properly capture the full range of variability of morphologically complex and rapidly evolving gravel‐bed rivers. Despite being limited to laboratory‐scale physical experiments, the method provides useful data to investigate fundamental morphodynamic processes such as bar migration, bank erosion, anabranches opening/closure, and the associate spatial and temporal scales. Further, the data obtained have the potential to enhance numerical model calibration and improve our understanding of the complex dynamics of real‐world settings. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

A Joint Analytic Method for Estimating Aquitard Hydraulic Parameters          下载免费PDF全文

Chao Zhuang  Zhifang Zhou  Walter A. Illman 《Ground water》2017,55(4):565-576

The vertical hydraulic conductivity (K_v), elastic (S_ske), and inelastic (S_skv) skeletal specific storage of aquitards are three of the most critical parameters in land subsidence investigations. Two new analytic methods are proposed to estimate the three parameters. The first analytic method is based on a new concept of delay time ratio for estimating K_v and S_ske of an aquitard subject to long‐term stable, cyclic hydraulic head changes at boundaries. The second analytic method estimates the S_skv of the aquitard subject to linearly declining hydraulic heads at boundaries. Both methods are based on analytical solutions for flow within the aquitard, and they are jointly employed to obtain the three parameter estimates. This joint analytic method is applied to estimate the K_v, S_ske, and S_skv of a 34.54‐m thick aquitard for which the deformation progress has been recorded by an extensometer located in Shanghai, China. The estimated results are then calibrated by PEST (Doherty 2005), a parameter estimation code coupled with a one‐dimensional aquitard‐drainage model. The K_v and S_ske estimated by the joint analytic method are quite close to those estimated via inverse modeling and performed much better in simulating elastic deformation than the estimates obtained from the stress‐strain diagram method of Ye and Xue (2005). The newly proposed joint analytic method is an effective tool that provides reasonable initial values for calibrating land subsidence models.  相似文献   

Meteorite impacts in the ocean: the danger of tsunamis on the coast of Buenos Aires Province,Argentina     

Perez  Iael  Wörner  Stefania  Dragani  Walter  Bacino  Guido  Medina  Rubén 《Natural Hazards》2020,103(2):2339-2354

Natural Hazards - Comets, meteorites, or asteroids impacting against the Earth are not unusual events. Such impacts on the ocean could produce tsunamis which can reach coastal areas. This paper...  相似文献   

Testing the preservation potential of early diagenetic dolomites as geochemical archives     

Mathias Mueller  Onyedika A. Igbokwe  Benjamin Walter  Chelsea L. Pederson  Sylvia Riechelmann  Detlev K. Richter  Richard Albert  Axel Gerdes  Dieter Buhl  Rolf D. Neuser  Giovanni Bertotti  Adrian Immenhauser 《Sedimentology》2020,67(2):849-881

Early marine diagenetic dolomite is a rather thermodynamically-stable carbonate phase and has potential to act as an archive of marine porewater properties. However, the variety of early to late diagenetic dolomite phases that can coexist within a single sample can result in extensive complexity. Here, the archive potential of early marine dolomites exposed to extreme post-depositional processes is tested using various types of analyses, including: petrography, fluid inclusion data, stable δ¹³C and δ¹⁸O isotopes, ⁸⁷Sr/⁸⁶Sr ratios, and U-Pb age dating of various dolomite phases. In this example, a Triassic carbonate platform was dissected and overprinted (diagenetic temperatures of 50 to 430°C) in a strike-slip zone in Southern Spain. Eight episodes of dolomitization, a dolostone cataclasite and late stage meteoric/vadose cementation were recognized. The following processes were found to be diagenetically relevant: (i) protolith deposition and fabric-preservation, and marine dolomitization of precursor aragonite and calcite during the Middle–Late Triassic; (ii) intermediate burial and formation of zebra saddle dolomite and precipitation of various dolomite cements in a Proto-Atlantic opening stress regime (T ca 250°C) during the Early–Middle Jurassic; (iii) dolomite cement precipitation during early Alpine tectonism, rapid burial to ca 15 km, and high-grade anchizone overprint during Alpine tectonic evolution in the Early Eocene to Early Miocene; (iv) brecciation of dolostones to cataclasite during the onset of the Carboneras Fault Zone activity during the Middle Miocene; and (v) late-stage regression and subsequent meteoric overprint. Data shown here document that, under favourable conditions, early diagenetic marine dolomites and their archive data may resist petrographic and geochemical resetting over time intervals of 10⁸ or more years. Evidence for this preservation includes preserved Late Triassic seawater δ¹³C_DIC values and primary fluid inclusion data. Data also indicate that oversimplified statements based on bulk data from other petrographically-complex dolomite archives must be considered with caution.  相似文献   

Evaluation of Hydraulic Conductivity Estimates from Various Approaches with Groundwater Flow Models     

Dongwei Sun  Ning Luo  Aaron Vandenhoff  Wesley McCall  Zhanfeng Zhao  Chenxi Wang  David L. Rudolph  Walter A. Illman 《Ground water》2024,62(3):384-404

Significant efforts have been expended for improved characterization of hydraulic conductivity (K) and specific storage (S_s) to better understand groundwater flow and contaminant transport processes. Conventional methods including grain size analyses (GSA), permeameter, slug, and pumping tests have been utilized extensively, while Direct Push-based Hydraulic Profiling Tool (HPT) surveys have been developed to obtain high-resolution K estimates. Moreover, inverse modeling approaches based on geology-based zonations, and highly parameterized Hydraulic Tomography (HT) have also been advanced to map spatial variations of K and S_s between and beyond boreholes. While different methods are available, it is unclear which one yields K estimates that are most useful for high resolution predictions of groundwater flow. Therefore, the main objective of this study is to evaluate various K estimates at a highly heterogeneous field site obtained with three categories of characterization techniques including: (1) conventional methods (GSA, permeameter, and slug tests); (2) HPT surveys; and (3) inverse modeling based on geology-based zonations and highly parameterized approaches. The performance of each approach is first qualitatively analyzed by comparing K estimates to site geology. Then, steady-state and transient groundwater flow models are employed to quantitatively assess various K estimates by simulating pumping tests not used for parameter estimation. Results reveal that inverse modeling approaches yield the best drawdown predictions under both steady and transient conditions. In contrast, conventional methods and HPT surveys yield biased predictions. Based on our research, it appears that inverse modeling and data fusion are necessary steps in predicting accurate groundwater flow behavior.  相似文献