排序方式： 共有24条查询结果，搜索用时 15 毫秒
21.
Ghani Cheikh Lounis Omar Mimouni Djamel Machane Amina Bacha 《Arabian Journal of Geosciences》2017,10(18):398
We present in this work investigations using seismic ambient vibration to delimitate the El Achour landslide (Algiers), upon which independent geotechnical studies were carried out. Acquisition campaign of ambient vibration on the El Achour site on June 2009 and June 2015, over a surface of about 2 ha, consisted of 64 records of ambient noise with a 10 to 20 m grid size. This approach consists of simple, light, and fast H/V acquisitions, in order to determine the extension of the unstable zone, the depth of the sliding surface, and to test the effectiveness of this method. Two peaks were interpreted as one being for the sliding surface and the other for the lithological interface. As results, in the stable area, they are satisfactory. Indeed, the points in this area are not intermediate peaks which could be related to potential sliding surfaces, which led us to think that we could delineate, using this method, the unstable area from the stable area. The HVSR method allows to determine the thickness of the geological formations and to highlight the lateral and vertical facies changes in broad area. 相似文献
22.
23.
The geochemical and mineralogical study of the Quiulacocha tailings impoundment has shown that the hydrological connection of the three studied mine-waste systems at Cerro de Pasco (Pyrite-rich waste-rock dump Excelsior, old tailings impoundment Quiulacocha, and the active tailings impoundment Ocroyoc) is a critical concern for effective acid mine drainage (AMD) control and mine-waste management. The Quiulacocha tailings covered 114 ha, comprising 79 Mt of tailings, which contained 50 wt.% pyrite, and are located at 4340 m altitude in a tropical puna climate with about 1025 mm/a rainfall and 988 mm/a of evaporation. The tailings were partially overlain by the Excelsior waste-rock dump, which contains about 26,400,000 m3 of waste rocks that cover 94 ha and contained 60 wt.% of pyrite, which origin from a massive pyrite-quartz replacement body. Therefore, these two mine-waste deposits had a direct hydrological connection, resulting in the export of AMD produced at Excelsior towards Quiulacocha. In the Quiulacocha impoundment there are two different types of tailings recognized, that interact with the AMD from Excelsior: 1) Zn–Pb-rich tailings and 2) Cu–As-rich tailings. During the sampling, the Zn–Pb-rich part of Quiulacocha was not producing important excesses of AMD from the oxidation zone, since the pH increased to near neutral values at 1 m depth. The underlying tailings were still able to neutralize the acidity produced in the oxidation zone through sulfide oxidation by the carbonates (mainly dolomite and siderite) contained in the Zn–Pb mineral assemblage. The main source of AMD in this mine-waste system is the Excelsior waste-rock dump. Its acid seepage infiltrates into Quiulacocha forming a Fe–Zn–Pb plume with a pH 5.5–6.1 and containing up to 7440 mg/L Fe, 627 mg/L Zn, and 1.22 mg/L Pb. The plume was detected at 10–13 m depth in the stratigraphy of Quiulacocha tailings. Additionally, the AMD seepage outcropping at the base of the Excelsior waste-rock dump was channeled on the tailings surface into the Quiulacocha pond (pH 2.3), which covered the Cu–As-rich tailings. Infiltration of this Fe(III)-rich AMD increased tailings oxidation in the southwestern part of the impoundment, and subsequently liberated arsenic by enargite oxidation. Additionally, the AMD collected in the Quiulacocha pond was pumped into the active Ocroyoc tailings impoundment, where sulfide oxidation was strongly enhanced by the input of dissolved Fe(III). Therefore, the AMD management and a hydrological separation of the different mine-waste systems could be a first step to prevent further extension of the AMD problem in order to prevent increased sulfide oxidation by Fe(III)-rich solutions. 相似文献
24.
The annual trace gas emissions from a West African rural region were calculated using direct observations of gas emissions and burning practices, and the findings compared to the guidelines published by the IPCC. This local-scale study was conducted around the village of Dalun in the Northern Region of Ghana, near the regional capital of Tamale. Two types of fires were found in the region – agricultural fires andwildfires. Agricultural fires are intentionally set in order to remove shrub and crop residues; wildfires are mostly ignited by herders to remove inedible grasses and to promote the growth of fresh grass. An agricultural fire is ignited with a fire front moving against the wind (backfire), whereas a wildfire moves with the wind (headfire). Gas emissions (CO2, CO and NO) weremeasured by burning eight experimental plots, simulating both headfires and backfires. A common method of evaluating burning conditions is to calculate modified combustion efficiency (MCE), which expresses the percentage of the trace gases released as CO2. Modified combustion efficiency was95% in the wildfires burned as headfires, but only 90% in the backfires.The burned area in the study region was determined by classifying a SPOT HRV satellite image taken about two months into the dry season. Fires were classified as either old burned areas or new burned areas as determined by the gradient in moisture content in the vegetation from the onset of the dry season. Classified burned areas were subsequently divided into two classes depending on whether the location was in the cultivated area or in the rangeland area, this sub-classification thus indicating whether the fire had been burned as a backfire or headfire. Findings showed that the burned area was 48% of the total region, and that the ratio of lowland wildfiresto agricultural fires was 3:1. The net trace gas release from the classified vegetation burnings were extrapolated to 26–46×108 gCO2, 78–302×106 g CO,17–156×105 g CH4,16–168×105 g NMHC and 11–72×103 NOx. Calculation of the emissionsusing proposed IPCC default values on burned area and average biomass resulted in a net emission 5 to 10 times higher than the measured emission values. It was found that the main reason for this discrepancy was not the emission factorsused by the IPCC, but an exaggerated fuel load estimate. 相似文献