Study on Strength Influence Mechanism of Fiber-Reinforced Expansive Soil Using Jute     

Wang Yixian  Guo Panpan  Shan Shengbiao  Yuan Haiping  Yuan Binxiang 《Geotechnical and Geological Engineering》2016,34(4):1079-1088

This study was undertaken to research the effects of jute fiber content, fiber length, water content and dry density of reinforced and unreinforced soil on the strength influence mechanism by implementing a series of laboratory tests and analysis. The most efficient fiber reinforcement effects was achieved by means of adding jute fiber with content of 0.6 % and length of 6 mm into expansive soil specimen prepared at maximum dry density and optimum moisture content. The cohesion of reinforced specimens increased first with increasing fiber content and fiber length and then decreased with further increase in fiber content and fiber length. The internal friction angle of reinforced specimens were not affected significantly by fiber content and fiber length. Higher water content reduces the fiber reinforcement effects by means of acting as lubricant in the interface of fiber and soil particles. Fiber reinforcement effects is more prominent for specimens prepared at higher dry density by increasing the effective contact area of fiber/soil. The application prospect of soil reinforcement using natural fiber is impeded by the hydrophilic nature and biodegradability of natural fiber, thus, studies on using chemical additive to do surface treatment for natural fiber are needed to improve the interfacial interaction of fiber/soil so as to widen the application of natural fiber.  相似文献   

岩石中的压力影形成的实验观测研究     

赵永红  张琼  HangWANG  綦超  杨天舒  David L KOHLSTED 《岩石学报》2016,32(1):264-270

野外地质观察发现,在大陆地壳变质岩中可以广泛观察到围绕一个大的单晶或者硬质点的两端区域填充低粘度相物质形成的压力影。为了定量研究岩石材料中压力影的形成条件,本文利用高精度Paterson气体介质变形装置,对含有刚性球的圣卡罗橄榄石和洋中脊玄武岩(MORB)的混合物圆柱型样品进行了高温高压扭转变形试验。变形实验前样品的初始熔融均匀分布,比例为φ≈0.05,变形试件尺寸为D8.9mm×L5.5mm,内含8粒直径约1mm的刚性球。扭转变形试验温度为1473K,围压为300MPa,应变率为γ≈1×10~(-4)s~(-1),最大剪切变形为γ≈4。实验结果表明,岩石受到扭转力的作用产生变形之后,当局部剪切应变达到γ≈1时,可以在刚性球周围形成熔融富集带和熔融贫乏带,即压力影构造,围绕刚性球对称分布。由于熔融分布的不均一性,富集带熔融比例上升,最高可以达到φ_(high)=0.1~0.3,熔融贫乏带熔融比例下降,含量为φ_(low)=0.01~0.02。由于刚性球对其周围的压力分布的扰动区域大约为刚性球的尺度范围,因此,在离开刚性球一定距离后,熔融趋于均匀分布。  相似文献   

The Moon     

Ross Taylor 《中国地球化学学报》2016,35(1):1-13

Recent geochemical and geophysical data from the Moon enable a revision of earlier interpretations regarding lunar origin, structure and bulk composition. Earth and Moon show many similarities among their isotopic compositions, but they have evolved in totally dissimilar ways, probably related to the deficiency of water and volatile elements in the Moon as well as the vast differences in size and internal pressure. Some global geochemical differences from the Earth such as volatile depletion based on K/U ratios have been established. However, all current lunar samples come from differentiated regions, making the establishment of a bulk composition more reliant on bulk geophysical properties or isotopic similarities; it remains unclear how the latter arose or relate to whole Moon composition. The lack of fractionation effects among the refractory and super-refractory elements indicates that the proto-lunar material seems unlikely to have been vaporized while the presence of volatile elements may place lower limits on proto-lunar temperatures. The apparent lack of geochemical evidence of an impacting body enables other possible impactors, such as comets, to be considered. Although the origin of the Moon remains currently unknown, it is generally believed that the Moon originated as the result of a giant impact on the Earth.  相似文献   

Quantification of photosynthetic inorganic carbon utilisation via a bidirectional stable carbon isotope tracer     

Hongtao Hang  Yanyou Wu 《中国地球化学学报》2016,35(2):130-137

The amount of bicarbonate utilised by plants is usually ignored because of limited measurement methods. Accordingly, this study quantified the photosynthetic assimilation of inorganic carbon (CO₂ and HCO₃ ^?) by plants. The net photosynthetic CO₂ assimilation (P _N), the photosynthetic assimilation of CO₂ and bicarbonate (P _N’), the proportion of increased leaf area (f _LA) and the stable carbon isotope composition (δ¹³C) of Orychophragmus violaceus (Ov) and Brassica juncea (Bj) under three bicarbonate levels (5, 10 and 15 mm NaHCO₃) were examined to determine the relationship among P _N, P _N’ and f _LA. P _N’, not P _N, changed synchronously with f _LA. Moreover, the proportions of exogenous bicarbonate and total bicarbonate (including exogenous bicarbonate and dissolved CO₂-generated bicarbonate) utilised by Ov were 2.27 % and 5.28 % at 5 mm bicarbonate, 7.06 % and 13.28 % at 10 mm bicarbonate, and 8.55 % and 17.31 % at 15 mm bicarbonate, respectively. Meanwhile, the proportions of exogenous bicarbonate and total bicarbonate utilised by Bj were 1.77 % and 3.28 % at 5 mm bicarbonate, 2.11 % and 3.10 % at 10 mm bicarbonate, and 2.36 % and 3.09 % at 15 mm bicarbonate, respectively. Therefore, the dissolved CO₂-generated bicarbonate and exogenous bicarbonate are important sources of inorganic carbon for plants.  相似文献   

The effect of slight to minor biodegradation on C<Subscript>6</Subscript> to C<Subscript>7</Subscript> light hydrocarbons in crude oils: a case study from Dawanqi Oilfield in the Tarim Basin,NW China     

Lu Yang  Chunming Zhang  Meijun Li  Jing Zhao  Xuening Qi  Jinxiu Du 《中国地球化学学报》2016,35(2):203-214

Light hydrocarbons (LHs) are one of the main petroleum fractions in crude oils, and carry much information regarding the genetic origin and alteration of crude oils. But secondary alterations—especially biodegradation—have a significant effect on the composition of LHs in crude oils. Because most of the LHs affected in oils underwent only slight biodegradation (rank 1 on the biodegradation scale), the variation of LHs can be used to describe more the refined features of biodegradation. Here, 23 crude oils from the Dawanqi Oilfield in the Tarim Basin, NW China, eleven of which have been biodegraded to different extents, were analyzed in order to investigate the effect of slight to minor biodegradation on C₆–C₇ LHs. The study results showed that biodegradation resulted in the prior depletion of straight-chained alkanes, followed by branched alkanes. In slight and minor biodegraded oils, such biodegradation scale could not sufficiently affect C₆–C₇ cycloalkanes. For branched C₆–C₇ alkanes, generally, monomethylalkanes are biodegraded earlier than dimethylalkanes and trimethylalkanes, which indicates that branched alkanes are more resistant to biodegradation, with the increase of substituted methyl groups on parent rings. The degree of alkylation is one of the primary controlling factors on the biodegradation of C₆–C₇ LHs. There is a particular case: although 2,2,3-trimethylbutane has a relative higher alkylation degree, 2,2-dimethylpentane is more resistant to biodegradation than 2,2,3-trimethylbutane. 2,2-Dimethylpentane is the most resistant to biodegradation in branched C₆–C₇ alkanes. Furthermore, the 2-methylpentane/3-methylpentane and 2-methylhexane/3-methylhexane ratios decreased steadily with increasing biodegradation, which implies that isomers of bilateral methyl groups are more prone to bacterial attack relative to mid-chain isomers. The position of the alkyls on the carbon skeleton is also one of the critical factors controlling the rate of biodegradation. With increasing biodegradation, Mango’s LH parameters K1 values decrease and K2 values increase, the values of n-heptane and isoheptane decrease, and the indices of methylcyclohexane and cyclohexane increase. LH parameters should be applied cautiously for the biodegraded oils. Because biodegraded samples belong to slight or minor biodegraded oils, the values of n-heptane and isoheptane from Dawanqi Oilfield can better reflect and determine the “Biodegraded” zone. When the heptane value is 0–21 and the isoheptane value is 0–2.6, the crude oil in Dawanqi Oilfield is defined as the “Biodegraded” zone.  相似文献   

Tin partition behavior and implications for the Furong tin ore formation associated with peralkaline intrusive granite in Hunan Province,China     

Xiaoyan Hu  Xianwu Bi  Ruizhong Hu  Guosheng Cai  Youwei Chen 《中国地球化学学报》2016,35(2):138-147

Tin deposits are often closely associated with granitic intrusions. In this study, we analyzed tin partition coefficients between different fluids and melts (\({\text{D}}_{Sn}^{aq.fl./melt}\)) as well as various crystals and melts \({\text{D}}_{Sn}^{aq.fl./melt}\)(\({\text{D}}_{Sn}^{crystal/melt}\)) from the Furong tin deposit associated with the Qitianling A-type granite. Our experimental results indicate that tin partition behavior is affected by the chemical compositions of fluids, melts, and minerals. Tin is prone to partitioning into the residual magma in fractional crystallization or other differential magmatic processes if the magma originated from crustal sources with high alkali content, high volatile content, and low oxygen fugacity. Highly evolved residual peralkaline granitic magma enriched in tin can lead to tin mineralization in a later stage. Furthermore, the volatiles F and Cl in the magma play important roles in tin partitioning behavior. Low F contents in the melt phase and high Cl content in the aqueous fluid phase are favorable factors for tin partitioning in the aqueous fluid phase. High Cl content in the aqueous fluid catalyzes water–rock interaction and leads to the extraction of tin from tin-bearing minerals. All these findings support a hydrothermal origin for the tin deposits. In light of the geotectonic setting, petrochemical characteristics, and mineralizing physicochemical conditions of the Furong tin deposit, it is inferred that the ore-forming fluid of the Furong tin ore deposit could have derived from the Qitianling peralkaline intrusion.  相似文献   

A hydrochemical study of the Hammam Righa geothermal waters in north-central Algeria   总被引：1，自引：0，他引：1  

Mohamed Belhai  Yasuhiro Fujimitsu  Fatima Zohra Bouchareb-Haouchine  Abdelhamid Haouchine  Jun Nishijima 《中国地球化学学报》2016,35(3):271-287

This study focuses on the hydrochemical characteristics of 47 water samples collected from thermal and cold springs that emerge from the Hammam Righa geothermal field, located in north-central Algeria. The aquifer that feeds these springs is mainly situated in the deeply fractured Jurassic limestone and dolomite of the Zaccar Mount. Measured discharge temperatures of the cold waters range from 16.0 to 26.5 °C and the hot waters from 32.1 to 68.2 °C. All waters exhibited a near-neutral pH of 6.0–7.6. The thermal waters had a high total dissolved solids (TDS) content of up to 2527 mg/l, while the TDS for cold waters was 659.0–852.0 mg/l. Chemical analyses suggest that two main types of water exist: hot waters in the upflow area of the Ca–Na–SO₄ type (Hammam Righa) and cold waters in the recharge zone of the Ca–Na–HCO₃ type (Zaccar Mount). Reservoir temperatures were estimated using silica geothermometers and fluid/mineral equilibria at 78, 92, and 95 °C for HR4, HR2, and HR1, respectively. Stable isotopic analyses of the δ¹⁸O and δD composition of the waters suggest that the thermal waters of Hammam Righa are of meteoric origin. We conclude that meteoric recharge infiltrates through the fractured dolomitic limestones of the Zaccar Mount and is conductively heated at a depth of 2.1–2.2 km. The hot waters then interact at depth with Triassic evaporites located in the hydrothermal conduit (fault), giving rise to the Ca–Na–SO₄ water type. As they ascend to the surface, the thermal waters mix with shallower Mg-rich groundwater, resulting in waters that plot in the immature water field in the Na–K–Mg diagram. The mixing trend between cold groundwaters from the recharge zone area (Zaccar Mount) and hot waters in the upflow area (Hammam Righa) is apparent via a chloride-enthalpy diagram that shows a mixing ratio of 22.6 < R < 29.2 %. We summarize these results with a geothermal conceptual model of the Hammam Righa geothermal field.  相似文献   

Improvement of saponification extraction method for fatty acids separation from geological samples     

Jiang Chang  Yanqing Xia  Suping Ma  Xuan Fang  Minzhuo Sun 《中国地球化学学报》2016,35(2):148-155

The conventional saponification method could result in lower recoveries and artificial changes of long-chain fatty acids. The main reason is the error judgment of the intermediate layer suspended between the aqueous and organic layer during the liquid–liquid extraction process. This study shows that the intermediate layer consists of lots of medium- to long-chain carboxylic salts for their special physical and chemical properties. An improved saponification extraction method is also developed and the results show that the carboxylic salts distributed in the intermediate layer could be obtained completely, which greatly enhances the authenticity and accuracy of fatty acid analysis. Additionally, the possible reasons of formation of the intermediate layer are also discussed.  相似文献   

An optimized sequential extraction scheme for molybdenum association in environmental samples     

Liang Liang  Jian-Ming Zhu 《中国地球化学学报》2016,35(2):111-119

By comparing three sequential extraction procedures, a new optimized extraction scheme for the molybdenum association in environmental samples was proposed. Five operational steps were described as exchangeable (KH₂PO₄ + K₂HPO₄: including water-soluble), associated with organic matter (NaOH), Fe–Mn oxides and/or carbonates (HCl), sulfides (H₂O₂) and residue (HNO₃ + HF + H₂O₂). An optimized extraction scheme was compared with Tessier’s procedure and the Commission of European Communities Bureau of Reference (BCR) was applied to black shales. Results showed Tessier’s procedure gave the lowest concentration values for exchangeable molybdenum and the highest values for the residual molybdenum, which could not present the efficiency of the extraction reagents. BCR’s procedure showed the highest values in oxidizable molybdenum and presented four fractions of molybdenum, which did not demonstrate the fractions of molybdenum in the black shales in detail. The optimized extraction scheme demonstrated a certain improvement on extraction efficiency over Tessier’s procedure for the lowest residual molybdenum, and revealed more featured fraction information of molybdenum in black shales than BCR’s. Therefore, after a comparison with other two extraction procedures, the optimized extraction scheme proved suitable for the molybdenum in black shales and it also showed an accurate determination of the molybdenum in the fractions and source of bioavailable Mo.  相似文献   

Ra’s Abdah of the north Eastern Desert of Egypt: the role of granitic dykes in the formation of radioactive mineralization,evidenced by zircon morphology and chemistry     

Ali A. Omran  Osama K. Dessouky 《中国地球化学学报》2016,35(4):368-380

Syenogranitic dykes in the north of Egypt’s Eastern Desert are of geological and economic interest because of the presence of magmatic and supergene enrichment of radioactive mineralization. Zircon crystal morphology within the syenogranitic dykes allows precise definition of sub-alkaline series granites and crystallized at mean temperature of about 637 °C. The growth pattern of the zircons suggest magmatic and hydrothermal origins of radioactive mineralization. Hydrothermal processes are responsible for the formation of significant zircon overgrowth; high U-zircon margins might have occurred contemporaneously with the emplacement of syenogranitic dykes which show anomalous uranium (eU) and thorium (eTh) contents of up to 1386 and 7330 ppm, respectively. Zircon chemistry revealed a relative increase of Hf consistent with decreasing Zr content, suggesting the replacement of Zr by Hf during hydrothermal activity. Visible uranium mineralization is present and recognized by the presence of uranophane and autunite.  相似文献