Evaluation of Subsurface Lithologic Units for Groundwater Exploration in the Barind Tract of Bangladesh     

M. A. F. M. Rashidul Hasan  M. M. Keramat  S. Shahid  R. Yasmin  M. Mohsenipour  Golam Shabbir Sattar 《Geotechnical and Geological Engineering》2016,34(5):1395-1411

Barind Tract, located north western part of Bangladesh, is one of the most diversified physiographic units of the country. The surface water supply in this part is particularly limited, so the irrigation is almost entirely depends on groundwater. However, over exploitation indicates falling groundwater heads in this area. The objective of present study is to examine the nature of the aquifer system Barind Tract of Bangladesh in order to assess the sustainability of groundwater yield. Borehole lithology data were collected, processed and analyzed for this purpose. Representative panel diagram, 3-D stratigraphic and cross-sectional views were also prepared for necessary assessment of the variation of individual subsurface stratum in different locations. The study identified three subsurface geologic formations namely, a top clay layer, sand layer of different grain size and at the bottom an impermeable clay zone. Maps of formation thickness and index revealed that aquifer thickness is low in the north-western corner and in some places of middle of south-western corner. The thickness of sand formation in other places is recorded above 20 m. It is expect that the finding of the study will help groundwater resources development, planning and management in the area.  相似文献   

Evaluation of Curve Fitting Techniques in Deriving p–y Curves for Laterally Loaded Piles     

Aliasger E. Haiderali  Gopal Madabhushi 《Geotechnical and Geological Engineering》2016,34(5):1453-1473

The p–y method is one of the most popular methods for the analysis and design of laterally loaded piles. The mathematical relationship it provides between the bending moment, which can be easily measured at strain gauges along the pile, and the soil resistance and lateral pile displacement, facilitates the construction of p–y curves. Numerical techniques are required to fit smooth continuous curves to the discrete bending moment data in order to improve the accuracy of subsequent differentiation and integration operations. Due to the lack of guidance on the optimum positioning of strain gauges and the reliability and accuracy of curve fitting methods, a unifying study, inclusive of small (0.61 m) and large (3.8 and 7.5 m) diameter piles in clay, was carried out using 18 strain gauge layouts and cubic spline, cubic to quintic B-spline and 3rd to 10th degree global polynomial techniques. Bending moment data was obtained using 3D finite element analysis. Through a comprehensive evaluation, the cubic and cubic B-spline methods were found to be consistently accurate in deriving p–y curves for both the small and large diameter piles.  相似文献   

Reliability Analysis of Earth Slopes Considering Spatial Variability     

Subhadeep Metya  Gautam Bhattacharya 《Geotechnical and Geological Engineering》2016,34(1):103-123

The paper presents a computational procedure for reliability analysis of earth slopes considering spatial variability of soils under the framework of the Limit Equilibrium Method. In the reliability analysis of earth slopes, the effect of spatial variability of soil properties is generally included indirectly by assuming that the probabilistic critical slip surface is the same as that determined without considering spatial variability. In contrast to this indirect approach, in the direct approach, the effect of spatial variability is included in the process of determination of the probabilistic critical surface itself. While the indirect approach requires much less computational effort, the direct approach is definitely more rigorous. In this context this paper attempts to investigate, with the help of numerical examples, how far away are the results obtained from the indirect approach from that obtained from the direct approach. In both the approaches, it is required to use a model of discretization of random fields into finite random variables. A few such models are available in the literature for one-dimensional (1D) as well as two-dimensional (2D) spatial variability. The developed computational scheme is based on the First Order Reliability Method (FORM) coupled with the Spencer Method of Slices valid for limit equilibrium analysis of general slip surfaces. The study includes bringing out the computational advantages and disadvantages of the three commonly used discretization models. The sensitivity of the reliability index to the magnitudes of the scales of fluctuation has also been studied.  相似文献   

Risk Assessment of Coal Floor Water Inrush from Underlying Aquifers Based on GRA–AHP and Its Application     

Bo Li  Yulong Chen 《Geotechnical and Geological Engineering》2016,34(1):143-154

Ground water inrush from underlying coal seam aquifers is a serious geohazard during coal mining in China. In order to effectively predict coal floor water inrush, the evaluation index system and evaluation standard for coal floor water inrush, containing quantitative indexes and qualitative indexes, is established on the base of conditions of aquifer and aquiclude, geologic structure and mining disturbance. Simultaneously, grey relational analysis and analytic hierarchy process are used to establish an evaluation model which efficiently overcomes the uncertainty between indexes of water inrush effects and really reflects the degree of importance for each index of water inrush effects. The model is applied to the typical working face of Yuzhou coalfield in the north of China to demonstrate the evaluation process. Compared to the water inrush coefficient method which is widely used for evaluating coal floor water inrush, the presented evaluation model in this paper accords more with the susceptibility of coal floor water inrush by multi-factor and is of nonlinear dynamic characteristics of highly complicated formation mechanism. This method offers a new tool in the assessment of ground water inrush in mine.  相似文献   

Rock Mass Deformation Characteristics in High-Steep Slopes Influenced by Open-Pit to Underground Mining     

Chuanbo Zhou  Shiwei Lu  Nan Jiang  Dingbang Zhang  Zhihua Zhang  Gaojian Miao 《Geotechnical and Geological Engineering》2016,34(3):847-866

In Daye Iron Mine, the open-pit mining has ended and the underground mining started in 2003. The present pit slopes are as high as 430 m and the slope angle is up to 43°. During the process of open-pit to underground mining, the high-steep pit slopes would be affected by both open-pit mining and underground mining, and its deformation characteristics would become more complex. So in this paper, the trinity method of numerical simulation, model experiment and field test was adopted to analyze the displacement and stress fields systematically. The results show that: (1) Prominent rebound deformation occurs near the slope foot, which is induced by the unloading in open-pit mining. When it is backfilled to 0 m level, the rebound deformation decreases, which indicate that backfilling mass can restrict the deformation and improve the slope stability; (2) Subsidence dominates the slope deformation in open-pit to underground mining and it increases with an increasing elevation of monitoring point; the maximum horizontal displacement occurs in the lower part of the slopes, because the backfilled part is squeezed by both the north slope and the south slope, and it has a lower elastic modulus than the previous orebody; (3) The stress and its variability near the slope foot are much larger than other places, indicating that the slope foot is most affected by stress redistribution and stress concentration may occur here; the stress at other stress monitoring points changes little, indicating that the influence of open-pit to underground mining is local; (4) The effect of underground mining on the deformation of the faults is not prominent; (5) Mining operations in near-ground part affect more on the variation of deformation and stress of pit slopes than that in deeper part.  相似文献   

Class I and Class II Rocks: Implication of Self-sustaining Fracturing in Brittle Compression     

Victor Abioye Akinbinu 《Geotechnical and Geological Engineering》2016,34(3):877-887

Tests to determine the complete stress–strain curve of rocks indicate whether the rocks can be classified a Class I or Class II. Class II rocks exhibits the potential for self-sustained failure in the post-peak region. The purpose of the research described in this paper was to investigate whether or not this self-sustained failure characteristic is related to the fragmentation of the rock. The aim of the research was, therefore, to determine possible relationships between fragmentation and various properties of several rocks types, including the influence of the Class II characteristic. Fragmentation of rock depends on its self-sustaining failure behaviour and the energy available in the post-peak region to shatter the rock. The correlation of static and dynamic rock properties with size of fragments resulting from compression tests demonstrate clear relationships of Class II rocks, but the same cannot be said for Class I rocks. Analyses of test results show that fragmentation increases with an increase in rock strength, and is explosive for Class II rocks. Probability density distributions were constructed to show the overall comparison of fragment sizes produced during failure of Class II and Class rocks. The calculated probability of passing at X₅₀ and X₁₀ sieve sizes show that Class II rocks as a group are more finely fragmented. It can therefore be concluded that, when breaking rocks under the same steady loading conditions, Class II rocks will show greater fragmentation than Class I rocks.  相似文献   

Stabilization of Expansive Soil with Cement Kiln Dust and RBI Grade 81 at Subgrade Level     

J. Sudheer Kumar  Upma Janewoo 《Geotechnical and Geological Engineering》2016,34(4):1037-1046

The present research work deals with an expansive high plastic clayey soil with cement kiln dust (CKD) and stabilizer (RBI Grade 81). The physical and engineering properties of soil are plasticity, compaction, unconfined compressive strength (UCS), consolidation and California bearing ratio (CBR) of the clayey soil and clay treated with CKD and stabilizer were determined. Soil chemistry was examined before and after treatment using scanning electron microscope (SEM) and elemental dispersive spectrometer. The clay mixed with CKD, CKD and RBI Grade 81 was found that optimum contents are 10 % (CKD), 15 % CKD with 4 % RBI Grade 81, respectively. The result indicates that CKD alone will decrease maximum dry density and increase optimum moisture content. CKD with RBI Grade 81 slightly increases maximum dry density and decreases optimum moisture content. UCS increased with CKD alone and CKD with RBI Grade 81 from 88.3 to 976 kN/m², respectively. CBR values were increased by the addition of CKD, CKD with RBI Grade 81 from 1.65 to 21.7 %. With the curing time of 3, 14 and 28 days, UCS and CBR values were increased due to pozzolanic reaction from cementations material. The treated soil has considerable reduction in compression index. SEM images clearly indicate the formation of CSH and CAH gel.  相似文献   

The Blasting Test and Blasting Vibration Monitoring of Vertical Crater Retreat Mining Method in the Luohe Iron Mine     

Zhenbin Rao  Sijing Cai 《Geotechnical and Geological Engineering》2016,34(4):1047-1056

Because the land requisition and demolishing became difficult more and more, the mining scheme of Luohe iron mine was changed from caving method to filling method. In order to ensure the safety of the residence and the underground tunnel cavern within the mobile belt of the underground mining, the Luohe iron mine did the blasting test on the vertical crater retreat mining method and blasting vibration monitoring. The blasting experiments use common emulsified oil explosives and non-electric initiation system. The way of caved ore adopts the cutting groove and bench side. The NUBOX-6016 intelligent vibration monitor was chosen in the blasting vibration monitoring. Twice experiments on the blasting vibration monitoring were done on the surface or in the underground refuge cavern. The first test select the three monitoring points on the ground and the second select two monitoring points on the ground and a monitoring point in the underground refuge cavern. The blasting vibration monitoring data were conducted by the regression analysis in the Sodev’s empirical formula. The vibration attenuation formula about the underground blasting vibration transmitting in three directions is derived. The blasting test on the vertical crater retreat mining method and the blasting vibration were analyzed. It is estimated if the vibration damage possibly the surface buildings and related facilities of mine.  相似文献   

Study on Strength Influence Mechanism of Fiber-Reinforced Expansive Soil Using Jute     

Wang Yixian  Guo Panpan  Shan Shengbiao  Yuan Haiping  Yuan Binxiang 《Geotechnical and Geological Engineering》2016,34(4):1079-1088

This study was undertaken to research the effects of jute fiber content, fiber length, water content and dry density of reinforced and unreinforced soil on the strength influence mechanism by implementing a series of laboratory tests and analysis. The most efficient fiber reinforcement effects was achieved by means of adding jute fiber with content of 0.6 % and length of 6 mm into expansive soil specimen prepared at maximum dry density and optimum moisture content. The cohesion of reinforced specimens increased first with increasing fiber content and fiber length and then decreased with further increase in fiber content and fiber length. The internal friction angle of reinforced specimens were not affected significantly by fiber content and fiber length. Higher water content reduces the fiber reinforcement effects by means of acting as lubricant in the interface of fiber and soil particles. Fiber reinforcement effects is more prominent for specimens prepared at higher dry density by increasing the effective contact area of fiber/soil. The application prospect of soil reinforcement using natural fiber is impeded by the hydrophilic nature and biodegradability of natural fiber, thus, studies on using chemical additive to do surface treatment for natural fiber are needed to improve the interfacial interaction of fiber/soil so as to widen the application of natural fiber.  相似文献   

塔西台地寒武纪沉积环境演化与海陆耦合     

刘沛显  关平  冯帆  贾文博  张巍  邓世彪  金亦秋 《沉积学报》2016,34(6):1092-1107

碳酸盐岩台地作为陆地与深海间的过渡带,其沉积记录了海洋和邻近陆地的演化。结合已有的沉积学工作,对塔里木盆地西部台地寒武系碳酸盐岩进行全岩及酸不溶物地球化学研究。塔西台地寒武纪主要发育局限台地、局限-蒸发台地或蒸发台地相沉积。碳酸盐岩的地球化学特征主要受沉积环境和成岩作用影响,对研究区寒武系白云岩来说,其元素组成极易受沉积微相的控制,氧同位素组成则很可能已被成岩作用改造,仅原生、准同生白云岩的Sr/Ba、Fe/Mn和C同位素可反映沉积相演化对应的古盐度、离岸距离等沉积环境特征的变化,酸不溶物化学蚀变指数（CIA值）则指示邻近陆地的化学风化强度与气候特征。寒武纪时期,塔西台地在相对海平面较高时发育局限台地相沉积,以水体盐度较低、沉积环境离岸较远和生物活动相对较弱为特征,陆地化学风化强度适中,气候温暖湿润;在相对海平面较低时发育蒸发台地相沉积,具有水体盐度较高、沉积环境离岸较近和生物活动相对较强等特点,陆地化学风化强烈,气候炎热极端;在相对海平面适中时发育局限-蒸发台地,沉积环境和邻近陆地的特征介于前述二者之间。沉积相演化对应的较长周期的海陆演化可能主要受全球海平面升降及宏观气候变化控制,具体表现为相对海平面升降所导致的海相沉积环境的变化,以及气候变化引起的陆地化学风化强度的变化。寒武纪塔西台地所处区域的海洋-陆地演化具有高度耦合的特征。  相似文献