Development of a soil moisture‐based distributed hydrologic model for determining hydrologically based critical source areas          下载免费PDF全文

Sisi Li  Margaret Gitau  David Bosch  Bernard A. Engel  Liang Zhang  Yun Du 《水文研究》2017,31(20):3543-3557

A simple grid cell‐based distributed hydrologic model was developed to provide spatial information on hydrologic components for determining hydrologically based critical source areas. The model represents the critical process (soil moisture variation) to run‐off generation accounting for both local and global water balance. In this way, it simulates both infiltration excess run‐off and saturation excess run‐off. The model was tested by multisite and multivariable evaluation on the 50‐km² Little River Experimental Watershed I in Georgia, U.S. and 2 smaller nested subwatersheds. Water balance, hydrograph, and soil moisture were simulated and compared to observed data. For streamflow calibration, the daily Nash‐Sutcliffe coefficient was 0.78 at the watershed outlet and 0.56 and 0.75 at the 2 nested subwatersheds. For the validation period, the Nash‐Sutcliffe coefficients were 0.79 at the watershed outlet and 0.85 and 0.83 at the 2 subwatersheds. The per cent bias was less than 15% for all sites. For soil moisture, the model also predicted the rising and declining trends at 4 of the 5 measurement sites. The spatial distribution of surface run‐off simulated by the model was mainly controlled by local characteristics (precipitation, soil properties, and land cover) on dry days and by global watershed characteristics (relative position within the watershed and hydrologic connectivity) on wet days when saturation excess run‐off was simulated. The spatial details of run‐off generation and travel time along flow paths provided by the model are helpful for watershed managers to further identify critical source areas of non‐point source pollution and develop best management practices.  相似文献   

Soil property variation mapping through data mining of soil category maps          下载免费PDF全文

Fei Du  A‐Xing Zhu  Lawrence Band  Jing Liu 《水文研究》2015,29(11):2491-2503

Spatial information on soil properties is an important input to hydrological models. In current hydrological modelling practices, soil property information is often derived from soil category maps by the linking method in which a representative soil property value is linked to each soil polygon. Limited by the area‐class nature of soil category maps, the derived soil property variation is discontinuous and less detailed than high resolution digital terrain or remote sensing data. This research proposed dmSoil, a data‐mining‐based approach to derive continuous and spatially detailed soil property information from soil category maps. First, the soil–environment relationships are extracted through data mining of a soil map. The similarity of the soil at each location to different soil types in the soil map is then estimated using the mined relationships. Prediction of soil property values at each location is made by combining the similarities of the soil at that location to different soil types and the representative soil property values of these soil types. The new approach was applied in the Raffelson Watershed and Pleasant Valley in the Driftless Area of Wisconsin, United States to map soil A horizon texture (in both areas) and depth to soil C horizon (in Pleasant Valley). The property maps from the dmSoil approach capture the spatial gradation and details of soil properties better than those from the linking method. The new approach also shows consistent accuracy improvement at validation points. In addition to the improved performances, the inputs for the dmSoil approach are easy to prepare, and the approach itself is simple to deploy. It provides an effective way to derive better soil property information from soil category maps for hydrological modelling. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Displacement analytical prediction of shallow tunnel based on unified displacement function under slope boundary     

Fanchao Kong  Dechun Lu  Xiuli Du  Chenpeng Shen 《国际地质力学数值与分析法杂志》2019,43(1):183-211

For slope condition of ground surface, the asymmetrical deformation about the vertical center line and the horizontal center line of the tunnel cross section can be formed. A unified displacement function expressed by the Fourier series is presented to express the asymmetrical deformation of the tunnel cross section. Five basic deformation modes corresponding to the expansion order 2 are a complete deformation mode to reflect deformation behaviors of the tunnel cross section under slope boundary. Such this complete displacement mode is implemented into the complex variable solution for analytically predicting tunneling-induced ground deformation under slope boundary. All of these analytical solutions are verified by good agreements of the comparison between the analytical solutions and finite element method results. A parameter study is carried out to investigate the influence of deformation modes of the tunnel cross section, geometrical conditions of the tunnel and the slope angle, and “Buoyancy effect” on the displacement field. Finally, the proposed method is consistent with measured data of the Hejie tunnel in China qualitatively. The presented solution can provide a simplified indication for evaluating the ground deformation under slope condition of ground surface.  相似文献   

Psammoma bodies in two types of human ovarian tumours: a mineralogical study     

Meng Fanlu  Wang Changqiu  Li Yan  Lu Anhuai  Mei Fang  Liu Jianying  Du Jingyun  Zhang Yan 《Mineralogy and Petrology》2015,109(3):357-365

  相似文献   

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins     

Hao Liu  Qinglong Xia  Ian D. Somerville  Yuan Wang  Xinhuai Zhou  Chengmin Niu  Xiaofeng Du  Xintao Zhang 《Geological Journal》2015,50(1):71-92

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Multiple overpressure systems and their relationship with hydrocarbon accumulation in the Qikou Depression of the Bohai Bay Basin,China     

Xue‐Bin Du  Xi‐Nong Xie  Yong‐Chao Lu  Liang Zhang  Wei Peng  Yun‐Peng Li 《Geological Journal》2015,50(4):465-476

Pressure measurements using drill stem tests and estimates from log data calculation indicate that three vertically stacked regional pressure compartments exist in the Qikou Depression of Bohai Bay Basin, N. China. The compartments comprise hydrostatic, upper weak, and lower overpressure systems. Laterally, overpressure (pressure coefficient > 1.2) occurs in the deeper areas and weakens gradually from the centre to the margin of the depression. The accumulation of oil and gas exhibits the interesting characteristics of oil‐bearing layers above gas‐bearing layers in the Qikou Depression. The pattern can be accounted for by the evolution of overpressure system, the maturity process of the source rock and the main fault activity. In the late Dongying Formation (Ed, 30 Ma), the lower overpressure system began to form shape, and the hydrocarbon sources generated a large volume of oil. However, because there was no migration pathway, the oil only accumulated in the original strata. In the late Guantao Formation (Ng, 12 Ma), the gas was generated, the upper overpressure system formed gradually, and the activity of the main fault gradually increased. Then, the overpressure pushed the early gathered oil to flow from the lower overpressure system into the upper overpressure system. Afterwards, the activity of the main fault decreased again and remains weak until now. Thus, later generated natural gas cannot keep migrating along the main fault and can only accumulate in the lower overpressure system. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

祁连山北缘深部弧形褶皱—逆冲带及其油气勘探前景   总被引：1，自引：0，他引：1       下载免费PDF全文

杜文博  张进江  肖毓祥  张波  李晓军  侯秀林  王盟  李景  程光瑾 《地质科学》2016,(4):1059-1073

祁连山北缘-河西走廊西段位于青藏高原东北缘,是新生代陆内构造活动最强烈地区。基于野外构造观测、横跨山前及前陆盆地区的三维地震构造分析与解释,结合地震地质属性提取分析,识别出祁连山北缘-酒泉盆地西段窟窿山-柳沟庄带隐伏的弧形褶皱-逆冲带,该弧形构造是造山带基底逆冲构造楔体垂向差异抬升与向前陆方向差异运动的产物;该弧形结构控制本区下白垩统地层裂缝发育、分布与破裂强度,并与本区先期断裂、裂缝带产生构造叠加效应,形成弧形构造“中央强裂缝发育带”,是形成构造裂缝型油气藏的有利区域。  相似文献   

A microscale model for air pollutant dispersion simulation in urban areas: Presentation of the model and performance over a single building   总被引：1，自引：0，他引：1  

Ning Zhang  Yunsong Du  Shiguang Miao 《大气科学进展》2016,33(2):184-192

A microscale air pollutant dispersion model system is developed for emergency response purposes. The model includes a diagnostic wind field model to simulate the wind field and a random-walk air pollutant dispersion model to simulate the pollutant concentration through consideration of the influence of urban buildings. Numerical experiments are designed to evaluate the model's performance, using CEDVAL(Compilation of Experimental Data for Validation of Microscale Dispersion Models) wind tunnel experiment data, including wind fields and air pollutant dispersion around a single building. The results show that the wind model can reproduce the vortexes triggered by urban buildings and the dispersion model simulates the pollutant concentration around buildings well. Typically, the simulation errors come from the determination of the key zones around a building or building cluster. This model has the potential for multiple applications; for example, the prediction of air pollutant dispersion and the evaluation of environmental impacts in emergency situations; urban planning scenarios;and the assessment of microscale air quality in urban areas.  相似文献   

结合多尺度纹理特征的遥感影像面向对象分类     

林雪  彭道黎  黄国胜  王雪军 《测绘工程》2016,25(7):22-27

地物具有多尺度的特点,单一尺度难以准确描述遥感影像包含的地物纹理信息。利用我国自行研发的高分一号遥感影像数据,采用灰度共生矩阵对第一主成分进行纹理特征提取,利用Jeffries-Matusit距离选择多尺度组合,并通过单一纹理结合多光谱数据的分类精度,以及纹理特征间的相关性,最终选择多尺度纹理特征组合进行面向对象分类。研究结果表明:结合多尺度纹理特征组合的面向对象GF-1影像分类能有效提取地物信息,总体分类精度达到81.75%,Kappa系数0.78。  相似文献   

A comprehensive approach from the raw and normalized anomalies to the analysis and prediction of the Beijing extreme rainfall on July 21, 2012     

Ning Jiang  Weihong Qian  Jun Du  Richard H. Grumm  Jiaolan Fu 《Natural Hazards》2016,84(3):1551-1567

  相似文献