Hydrochemical and isotopic characterization of the hydrological budget of a MAB Reserve: Mar Chiquita lagoon,province of Buenos Aires,Argentina   总被引：1，自引：0，他引：1  

Melisa Glok Galli  Daniel Emilio Martínez  Eduardo Emilio Kruse  Sebastián Iván Grondona  María Lourdes Lima 《Environmental Earth Sciences》2014,72(8):2821-2835

Mar Chiquita is a coastal lagoon located in the Argentine Buenos Aires province in South America. The aim of this study was to perform a hydrochemical and stable isotopes characterization in order to better the understanding of the hydrology of the Mar Chiquita lagoon’s catchment and its water budget. Groundwater samples were taken from 144 wells and 21 samples from main streams, and seven lagoon water samples were also collected. Chemical analyses were carried out using standard laboratory methods, and isotopic determinations were made through laser spectroscopy using a DLT-100 liquid–water isotope analyzer. Hydrochemical analysis permits a general classification of groundwater and streamwater as sodium bicarbonate waters, while the lagoon chemical composition shows an evolution toward seawater composition, from the north to its mouth, which is located southerly. Isotopic data show a source of aquifer recharge from rainfall and a groundwater domain into the streams’ flow. Three main components can be recognized as end members in a plot of electrical conductivity (EC) versus δ¹⁸O: seawater, streamwater and groundwater. Obtained EC values for groundwater in the discharge zone (EC average value = 3,516 μS/cm) allow minimizing its direct contribution and to take into consideration two dominating end members: streamwater and seawater. Mar Chiquita lagoon’s water falls close to the line between streamwater and seawater end members according to its EC and δ¹⁸O. The obtained seawater proportion for these samples ranges from 84 % in the lagoon’s mouth to around 0 % in the more distal area.  相似文献   

Coastal aquifers of Europe: an overview   总被引：8，自引：3，他引：5  

Emilio Custodio 《Hydrogeology Journal》2010,18(1):269-280

Europe has a long coastline along which many human activities are concentrated. Coastal aquifer development is often intensive and subject to salinity problems as a result of seawater intrusion, upconing of deep saline water, and residual salinity in aquitards. Studies have been carried out since the end of the nineteenth century, and have set the basic principles of freshwater/marine-water relations. Some aquifers are carefully studied, monitored and managed; examples can be found in The Netherlands, Belgium, southern Italy and northeastern Spain. Often important coastal aquifers are of relatively small size but crucial to supply human needs, which vary from mostly urban and industrial in mid to high latitudes, to dominantly seasonal for irrigation in the Mediterranean area and the archipelagos. The different situations can be grouped into: recent deltas, other coastal detritic formations, carbonate formations, and the special situations in small islands. Comments on these situations are provided and some examples are introduced, just for illustration.  相似文献   

Regional structure and tectonic history of the obliquely colliding Columbus foreland basin, offshore Trinidad and Venezuela   总被引：1，自引：0，他引：1  

Emilio Garciacaro 《Marine and Petroleum Geology》2011,28(1):126-148

Cenozoic eastward migration of the Caribbean plate relative to the South American plate is recorded by an 1100-km-long Venezuela-Trinidad foreland basin which is oldest in western Venezuela (65-55 Ma), of intermediate age in eastern Venezuela (34-20 Ma) and youngest beneath the shelf and slope area of eastern offshore Trinidad (submarine Columbus basin, 15.0 Ma-Recent). In this study of the regional structure, fault families, and chronology of faulting and tectonic events affecting the hydrocarbon-rich Columbus foreland basin of eastern offshore Trinidad, we have integrated approximately 775 km of deep-penetration 2D seismic lines acquired by the 2004 Broadband Ocean-Land Investigations of Venezuela and the Antilles arc Region (BOLIVAR) survey, 325 km of vintage GULFREX seismic data collected by Gulf Oil Company in 1974, and published industry well data that can be tied to some of the seismic reflection lines. Top Cretaceous depth structure maps in the Columbus basin made from integration of all available seismic and well data define for the first time the elongate subsurface geometry of the 11-15 km thick and highly asymmetrical middle Miocene-Recent depocenter of the Columbus basin. The main depocenter located 150-200 km east of Trinidad and now the object of deepwater hydrocarbon exploration is completely filled by shelf and deepwater sediments derived mainly from the Orinoco delta. The submarine Darien ridge exhibits moderate (20-140 m) seafloor relief, forms the steep (12°-24°), northern structural boundary of the Columbus basin, and is known from industry wells to be composed of 0.5-4.5 km thick, folded and thrust-imbricated, hydrocarbon-bearing section of Cretaceous and early Tertiary limestones and clastic rocks. The eastern and southern boundaries of the basin are formed by the gently (1.7°-4.5°), northward-dipping Cretaceous-Paleogene passive margin of South America that is in turn underlain by Precambrian rocks of the Guyana shield.Interpretation of seismic sections tied to wells reveals the following fault chronology: (1) middle Miocene thrusting along the Darien ridge related to highly oblique convergence between the Caribbean plate and the passive margin of northern South America; continuing thrusting and transpression in an oblique foreland basin setting through the early Pleistocene; (2) early Pliocene-recent low-angle normal faults along the top of the Cretaceous passive margin; these faults were triggered by oversteepening related to formation of the downdip, structurally and bathymetrically deeper, and more seaward Columbus basin; large transfer faults with dominantly strike-slip displacements connect gravity-driven normal faults that cluster near the modern shelf-slope break and trend in the downslope direction; to the south no normal faults are present because the top Cretaceous horizon has not been oversteepened as it is adjacent to the foreland basin; (3) early Pliocene-Recent strike-slip faults parallel the trend of the Darien ridge and accommodate present-day plate motions.  相似文献   

Quaternary： “Quo Vadis”？     

Kenitiro Suguio Aleth&#;ea Ernandes Martins Sallun Emilio A. A. Soares 《《幕》》2005,28(3):197-200

  相似文献   

Numerical modelling of the effect of horizontal drains in centrifuge tests on soil-structure interaction in liquefiable soils     

Fasano  Gianluca  Nappa  Valeria  Özcebe  Ali Güney  Bilotta  Emilio 《Bulletin of Earthquake Engineering》2021,19(10):3895-3931

Bulletin of Earthquake Engineering - The research presented herein was carried out in the framework of the H2020 LIQUEFACT project ( http://www.LIQUEFACT.eu/ ). This paper presents the results of a...  相似文献   

Detection of impervious surface change with multitemporal Landsat images in an urban–rural frontier     

Dengsheng Lu  Emilio Moran  Scott Hetrick 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(3):298-306

Mapping and monitoring impervious surface dynamic change in a complex urban-rural frontier with medium or coarse spatial resolution images is a challenge due to the mixed pixel problem and the spectral confusion between impervious surfaces and other non-vegetation land covers. This research selected Lucas do Rio Verde County in Mato Grosso State, Brazil as a case study to improve impervious surface estimation performance by the integrated use of Landsat and QuickBird images and to monitor impervious surface change by analyzing the normalized multitemporal Landsat-derived fractional impervious surfaces. This research demonstrates the importance of two-step calibrations. The first step is to calibrate the Landsat-derived fraction impervious surface values through the established regression model based on the QuickBird-derived impervious surface image in 2008. The second step is to conduct the normalization between the calibrated 2008 impervious surface image with other dates of impervious surface images. This research indicates that the per-pixel based method overestimates the impervious surface area in the urban-rural frontier by 50%-60%. In order to accurately estimate impervious surface area, it is necessary to map the fractional impervious surface image and further calibrate the estimates with high spatial resolution images. Also normalization of the multitemporal fractional impervious surface images is needed to reduce the impacts from different environmental conditions, in order to effectively detect the impervious surface dynamic change in a complex urban-rural frontier. The procedure developed in this paper for mapping and monitoring impervious surface area is especially valuable in urban-rural frontiers where multitemporal Landsat images are difficult to be used for accurately extracting impervious surface features based on traditional per-pixel based classification methods as they cannot effectively handle the mixed pixel problem.  相似文献   

A deep, stratigraphically and structurally controlled landslide: the case of Mount La Civita (Molise, Italy)   总被引：2，自引：0，他引：2  

Pietro P. C. Aucelli  Emilio Casciello  Massimo Cesarano  Sebastiano Perriello Zampelli  Carmen M. Rosskopf 《Landslides》2013,10(5):645-656

The present paper illustrates the results of an integrated study of a large landslide located on the southern slope of Mount la Civita (Molise, Southern Apennine), an E–W elongated, SSE dipping and 890-m-high monocline carbonate ridge. The upper part of the slope affected by the landslide is largely controlled by strata attitude while its basal part is marked by a strike–slip fault causing the tectonic juxtaposition of the carbonate successions against predominantly clayey flysch units. An integrated study, including geological, geomorphological and geotechnical investigations, was carried out to determine the features of the landslide and to plan further investigation and monitoring. In particular, from 2002 to 2004, Differential Global Positioning System monitoring and core drillings, coupled with inclinometer measurements, were carried out to determine the landslide’s kinematics, extent, depth to the surface of rupture and rates of movement. Inclinometer data revealed the presence of the rupture surface at a depth of about 20 m. DGPS monitoring allowed rates of movement up to several tens of centimetres per year to be recorded. The nearby village of Civitanova del Sannio can still be considered at risk due to the landslide, as recent remedial works, consisting mainly of very shallow re-shaping of the slope by blasting and partial filling of trenches, did not succeed in stopping its movement.  相似文献   

Time variability of low-temperature fumaroles at Stromboli island (Italy) and its application to volcano monitoring     

Paolo Madonia  Emilio Fiordilino 《Bulletin of Volcanology》2013,75(12):1-12

The constant and mild activity of Stromboli volcano (Italy) is occasionally interrupted by effusive events and/or more energetic explosions, referred to as major explosions and paroxysms, which are potentially dangerous for the human community. Although several premonitory signals for effusive phases have been identified, precursors of major explosions and paroxysms still remain poorly understood. With the aim of contributing to the identification of possible precursors of energetic events, this work discusses soil temperature data acquired in low-temperature fumaroles at Stromboli in the period 2006–2010. Data analysis revealed that short-term anomalies recorded in the thermal signal are potentially useful in predicting state changes of the volcano. In particular, sudden changes in fumarole temperatures and their hourly gradients were observed from several days to a few hours prior to fracturing and paroxysmal events, heralded by peculiar waveforms of the recorded signals. The qualitative interpretation is supported by a quantitative, theoretical treatment that uses circuit theory to explain the time dependence of the short-period temperature variations, showing a good agreement between theoretical and observational data.  相似文献   

Integration of linear programming and GIS for land-use modelling     

Emilio Chuvieco 《International journal of geographical information science》2013,27(1):71-83

Abstract

Geographical Information Systems (GIS) are becoming basic tools for a wide variety of earth science and land-use applications. This article presents linear programming (LP) as a promising tool for spatial modelling within a GIS. Although LP is not properly a spatial technique, it may be used to optimize spatial distributions or to guide the integration of variables. An example of the use of LP in land-use planning is described, with minimizing rural unemployment as the main goal. Technical, financial and ecological constraints are established to show the influence of several limitations on achieving the optimal solution. LP makes it possible to achieve optimal land-use, where the objective is maximized and the constraints respected. LP can also be used to simulate different planning scenarios, by modifying both the objective function coefficients and the constraints. The integration of LP and GIS is presented in two phases: (i) acquisition of attribute data for the LP model, and (ii) modelling and mapping the results.  相似文献   

A nonlinear Lagrangian particle model for grains assemblies including grain relative rotations     

Emilio Turco  Francesco dell'Isola  Anil Misra 《国际地质力学数值与分析法杂志》2019,43(5):1051-1079

We formulate a discrete Lagrangian model for a set of interacting grains, which is purely elastic. The considered degrees of freedom for each grain include placement of barycenter and rotation. Further, we limit the study to the case of planar systems. A representative grain radius is introduced to express the deformation energy to be associated to relative displacements and rotations of interacting grains. We distinguish inter-grains elongation/compression energy from inter-grains shear and rotations energies, and we consider an exact finite kinematics in which grain rotations are independent of grain displacements. The equilibrium configurations of the grain assembly are calculated by minimization of deformation energy for selected imposed displacements and rotations at the boundaries. Behaviours of grain assemblies arranged in regular patterns, without and with defects, and similar mechanical properties are simulated. The values of shear, rotation, and compression elastic moduli are varied to investigate the shapes and thicknesses of the layers where deformation energy, relative displacement, and rotations are concentrated. It is found that these concentration bands are close to the boundaries and in correspondence of grain voids. The obtained results question the possibility of introducing a first gradient continuum models for granular media and justify the development of both numerical and theoretical methods for including frictional, plasticity, and damage phenomena in the proposed model.  相似文献