Book reviews     

Mark S. T. Bukowinski  Philip E. Wannamaker  Manfred Koch  Yukio Fujinawa  Dr. Pradeep Talwani  D. Möhlmann  Andrew H. Knoll  Lucia Lovison-Golob  Krzysztof Haman  Hanna Pawłowska  Henryk Piwkowski  Dr. Anthony Dore  Nguyen Xuan Huy  Edward R. Cook  Jan Błecki  Jacek Leliwa-Kopystynski  Magdalena Sroczynska-Kozuchowska 《Pure and Applied Geophysics》1993,140(1):139-177

  相似文献   

A note on the geodetic use of gravity measurements     

A. H. Cook 《Journal of Geodesy》1962,36(1):77-78

  相似文献   

An experiment proving that dilatancy is a pervasive volumetric property of brittle rock loaded to failure   总被引：1，自引：0，他引：1  

N. G. W. Cook 《Rock Mechanics and Rock Engineering》1970,2(4):181-188

Summary An Experiment Proving that Dilatancy is a Pervasive Volumetric Property of Brittle Rock Loaded to Failure. Dilatancy, that is, volumetric expansion relative to the compression resulting from elastic deformation is often observed in the compression of rock specimens to failure. This phenomenon is of considerable importance to the understanding of the processes of rock failure and in their application to geological and engineering problems. Most of the observations to date have been made on small cylindrical specimens of rock, with a high surface area to volume ratio; frequently by means of resistance strain gauges cemented to the surface of the specimen. The possibility of the measured dilatancy being a superficial phenomenon due to anomalous surface deformations cannot be excluded. Measurements of dilatant deformation on the inside and outside of hollow cylindrical specimens during compression under homogeneous stresses provide a means of resolving this uncertainty. Superficial dilatancy would result in a relative diminution of the cross-section of the hole as that of the outside of the specimen increases with deformation; whereas pervasive volumetric dilatancy would result in similar relative increases in the cross-section of both the hole and the specimen. Experiments on hollow cyclindrical specimens of quartzite show that dilatancy is a pervasive volumetric phenomenon.

---

Zusammenfassung Experimenteller Nachweis zur Dilatanz als volumenbezogene Eigenschaft spröder, bis zum Bruch belasteter Körper. Dilatanz, d. h. relative Volumenvergrößerung im Vergleich zur elastischen Zusammendrückung, ist ein Phänomen, welches häufig bei der Druckbeanspruchung von Gesteinen beobachtet werden kann. Diese Erscheinung ist für das Verständnis der Bruchvorgänge von Gesteinen und deren Anwendung auf geologische und technische Probleme von beträchtlicher Bedeutung. Ein Großteil der bisherigen Untersuchungen zu dieser Frage wurde an kleinen zylindrischen Probekörpern mit großem Verhältnis von Oberfläche : Volumen durchgeführt. Bei diesen Versuchen wurden meist Dehnmeßstreifen an die Oberfläche der Probekörper geklebt. Demnach kann die Möglichkeit nicht ausgeschlossen werden, daß die beobachtete Dilatation infolge abnormaler Oberflächenverformungen ein Oberflächenphänomen ist. Messungen der Dilatation an der Innen- und Außenseite eines hohlen zylindrischen Probekörpers während der Druckbeanspruchung in einem homogenen Spannungsfeld bilden eine Möglichkeit, diese Ungewißheit zu beseitigen. Im Falle einer oberflächengebundenen Dilatation würde es zu einer relativen Verkleinerung des inneren Querschnittes des hohlen Probekörpers kommen, während die Dilatation der Außenseite mit der Verformung anwachsen würde. Demgegenüber würde es im Falle der Dilatation als einer volumetrischen Eigenschaft zu einer ähnlichen relativen Vergrößerung des inneren Querschnittes des hohlen Probekörpers und des Probekörpers selbst kommen. Die Experimente an hohlen zylindrischen Probekörpern aus Quarzit zeigen, daß die Dilatanz ein volumetrisches Phänomen ist.

---

Résumé Expérience prouvant que la dilatance est répartie dans tout le volume des roches fragiles chargées jusqu'à la rupture. La dilatance, c'est-à-dire l'augmentation de volume par rapport à la déformation élastique en compression, se manifeste souvent quand on comprime des échantillons de roche jusqu'à la rupture. Ce phénomène a une importance considérable pour la compréhension des processus de rupture des roches, et pour les applications aux problèmes géologiques et géotechniques. La plupart des essais ont été faits à ce jour sur de petits échantillons cylindriques, dont la surface est grande par rapport au volume, le plus souvent au moyen de jauges à résistance collées sur la surface de l'échantillon. Il reste la possibilité que la dilatance mesurée ne soit qu'un phénomène superficiel, dû à des déformations anormales de la surface.Pour lever cette incertitude, on peut mesurer la dilatance à la fois sur la surface externe et sur la surface interne de cylindres creux soumis à des contraintes homogènes: une dilatance superficielle produirait une diminution de la section du trou et une augmentation de la section totale, tandis qu'une dilatance répartie dans tout le volume produirait des augmentations de section similaires. Les essais sur cylindres creux de quartzite montrent que la dilatance est un phénomène réparti dans tout le volume.

---

---

With 4 Figures  相似文献   

Climate Change and Winter Wheat Management: A Modelling Scenario for South-Eastern England     

A. Ghaffari  H. F. Cook  H. C. Lee 《Climatic change》2002,55(4):509-533

Crop models are useful tools for assessing the impact of climate change on crop production. The dynamic crop-growth model, CERES-Wheat is used to examine crop management responses, including yield, under six climate change scenarios for the years 2025 and 2050 on the Estate of Imperial College at Wye, Kent, U.K. Sensitivity analysis shows a dry matter yield decrease in response to increases in temperature alone. CERES-Wheat was then constrained to assess the crop performance under water-limited production scenarios with different soils, and the results show that crop grain yield actually increases, largely due to CO₂ fertilisation leading to increased rates of photosynthesis. Different management practices (planting dates and nitrogen application) were applied to find the best adaptation strategies. In general, `early' sowing (10th September) had the highest simulated yield, and `late' sowing (10th November) the lowest. For the soils tested, the highest and sustained crop production was obtained from Hamble soils (silt loam) compared with either the Fyfield (sandy) or Denchworth (clay). Adding nitrogen and other fertilisers would likely be necessary to take full advantage of the CO₂ fertilisationeffect and to compensate, in some cases, for yield losses caused by climate change where water shortage becomes serious.  相似文献   

Spatial and temporal variability of ground water recharge in central Australia: a tracer approach   总被引：7，自引：0，他引：7  

Harrington GA  Cook PG  Herczeg AL 《Ground water》2002,40(5):518-527

Two environmental tracer methods are applied to the Ti-Tree Basin in central Australia to shed light on the importance of recharge from floodouts of ephemeral rivers in this arid environment. Ground water carbon-14 concentrations from boreholes are used to estimate the average recharge rate over the interval between where the ground water sample first entered the saturated zone and the bore. Environmental chloride concentrations in ground water samples provide estimates of the recharge rate at the exact point in the landscape where the sample entered the saturated zone. The results of the two tracer approaches indicate that recharge rates around one of the rivers and an extensive floodplain are generally higher than rates of diffuse recharge that occurs in areas of lower topographic relief. Ground water 2H/1H and 18O/16O compositions are all depleted in the heavier isotopes (delta2H = -67 per thousand to -50 per thousand; delta18O = -9.2 per thousand to -5.7%o) compared with the long-term, amount-weighted mean isotopic composition of rainfall in the area (delta2H = -33.8 per thousand; delta18O = -6.3 per thousand). This indicates that recharge throughout the basin occurs only after intense rainfall events of at least 150 to 200 mm/month. Finally, a recharge map is developed to highlight the spatial extent of the two recharge mechanisms. Floodout recharge to the freshest ground water (TDS <1,000 mg/L) is approximately 1.9 mm/year compared with a mean recharge rate of approximately 0.2 mm/year to the remainder of the basin. These findings have important implications for management of the ground water resource.  相似文献   

Monitoring Subsurface Microbial Ecology in a Sulfate-Amended, Gasoline-Contaminated Aquifer   总被引：3，自引：0，他引：3  

Kerry Sublette  Aaron Peacock  David White  Greg Davis  Dora Ogles  David Cook  Ravi Kolhatkar  Dennis Beckmann  Xiaomin Yang 《Ground Water Monitoring & Remediation》2006,26(2):70-78

  相似文献   

A Pb-Ra-Th-U study of Klyuchevskoy and Bezymianny volcanoes, Kamchatka     

Simon Turner  Kenneth W.W. Sims  Craig Cook 《Geochimica et cosmochimica acta》2007,71(19):4771-4785

Lavas from Klyuchevskoy and Bezymianny volcanoes, Kamchatka, appear to show a link between the extent of partial melting in their mantle source region and the subsequent degree of fractionation suffered by the magmas during passage through the crust. This fractionation may have occurred on timescales significantly less than 1000 years if observed ²²⁶Ra excesses largely reflect variable residual porosity in the source melting region. Unlike most arc lavas, those with the highest MgO contents and Ba/Th ratios have the lowest ²²⁶Ra excess. Forward models suggest that those portions of the source which had undergone the greatest addition of U by fluids from the subducting plate also underwent the greatest extents of partial melting at the highest residual porosity. At Kluchevskoy, a change from eruption of high-MgO to high-Al₂O₃ basaltic andesites around 1945 is reflected in an increase in size of ²²⁶Ra excess which seems to require a simultaneous decrease in residual porosity and suggests a rapid changes in the melting regime. The eruption of andesites at Bezyminanny, simultaneous with the eruption of basaltic andesites at Klyuchevskoy, further suggests that different degree melts produced at differing residual porosity can be formed and extracted from the melt region at the same time. Thus, the melting processes beneath Klyuchevskoy and Bezyminanny are demonstrably complex. They have clearly been influenced by both fluid addition from the subducting plate and extension and decompression beneath the Central Kamchatka Depression. Finally, the ²¹⁰Pb data are, with one or two exceptions, in equilibrium with ²²⁶Ra, suggesting that there was restricted relative magma-gas movement in this highly productive magmatic system.  相似文献   

Thermobarometry of the Bleikvassli Zn-Pb-(Cu) deposit, Nordland, Norway     

J. L. Rosenberg  P. G. Spry  C. E. Jacobson  N. J. Cook  F. M. Vokes 《Mineralium Deposita》1998,34(1):19-34

The Bleikvassli massive sulfide ore deposit is hosted by Proterozoic pelitic, quartzofeldspathic, and amphibolitic rocks of the Uppermost Allochthon of the Scandinavian Caledonides. Staurolite-garnet-biotite and kyanite-staurolite-biotite assemblages indicate that metamorphism reached the kyanite zone of the amphibolite facies. Geothermobarometry was conducted on rocks in and around the deposit using a variety of silicate and sulfide calibrations. Temperature determinations are most reliant on the garnet-biotite exchange reaction, with analyses obtained from 259 garnet rims and adjacent biotite. Results from nine calibrations of the garnet-biotite geothermometer are considered, but compositional limitations of many calibrations involving high Ca and Mn contents in garnet and Al^VI and Ti in biotite make many of the coexisting mineral pairs unsuitable. Average temperatures calculated from the two calibrations that most closely address the garnet-biotite compositions observed at Bleikvassli are 584 °C ± 49 °C and 570 °C ± 40 °C. The application of two calibrations of the garnet-staurolite geothermometer on a limited number of samples yields 581 °C ± 2 °C and 589 °C ± 12 °C, assuming a _H2O=0.84, based upon calculations of the modal proportions of gaseous species. Pressure determinations are less constrained. Phengite and plagioclase-biotite-garnet-muscovite geobarometers give average pressures of approximately 5.0 kbar and 8.5 ± 1.2 kbar, respectively. Pressures obtained from the sphalerite-hexagonal pyrrhotite-pyrite barometer average 7.7 ± 1.0 kbar. In consideration of these results, the peak metamorphic conditions at the Bleikvassli deposit are estimated to be 580 °C and 8 kbar. Received: 18 June 1997 / Accepted: 14 May 1998  相似文献   

The metamorphosed mafic-ultramafic complex of Mokuro, Ilesha Schist Belt, southwestern Nigeria     

O.A. Ige  M. Okrusch  U. Schüssler  E. Schmädicke  N.J. Cook 《Journal of African Earth Sciences》1998,26(4):593-618

In the Proterozoic Schist Belt of Nigeria, lenticular bodies of metabasites and meta-ultramafics are frequently intercalated within staurolite bearing metapelitic schists. Such a metamorphosed mafic-ultramafic complex is particularly well exposed in the Mokuro riverbed between the towns of Ife and Ilesha. These outcrops display contact relationships with the surrounding metasediments, as well as between the individual mafic and ultramafic rock types. The most common mafic rocks are indistinctly layered amphibolites, accompanied by apatite rich amphibolites and massive amphibolites, in part rich in ilmenite and pyrrhotite. Among the generally massive ultramafic rocks, nearly monomineralic amphibole rocks predominate, while chlorite-amphibole, talc-chlorite-amphibole and talc bearing olivine-chlorite-amphibole rocks occur in subordinate amounts.Field, textural and geochemical evidence suggest that the mafic-ultramafic complex derived from a thick, structurally differentiated basaltic sill that contained doleritic portions in its interior. Slow cooling rates in these inner parts enabled crystal settling with the formation of ultramafic cumulates. Due to the enrichment of volatiles during the crystallisation process, higher amounts of apatite and sulphides, as well as late magmatic amphibole, were formed in parts of the mafic-ultramafic body.Mineral assemblages in the mafic-ultramafic complex testify to a metamorphic overprint under amphibolite-facies conditions. Thermodynamic modelling in the system CMFASH leads to an estimated P–T range of 1.5–3 kbar and 550–620°C for the metamorphic peak assemblage talc-olivine-chlorite-Ca amphibole-orthoamphibole.  相似文献   

Variability and anisotropy of mechanical properties of the pittsburgh coal seam     

N. E. Cook Jr.  H. -Y. Ko  K. H. Gerstle 《Rock Mechanics and Rock Engineering》1978,11(1):3-18

SummaryVariability and Anisotropy of Mechanical Properties of the Pittsburgh Coal Seam Results of an experimental program to determine the vertical variation of material stiffness and strength of an important coal seam are presented, with the aim of providing information for realistic modeling for purposes of analysis. The seam is divided into four zones, and data from each are evaluated statistically. It is concluded that this seam contains two zones with measurably different properties, which, however, are small compared to the observed scatter of data.

---

ZusammenfassungStreubereich und Anisotropie der mechanischen Eigenschaften des Pittsburgher Kohleflözes Es werden Ergebnisse eines Versuchsprogramms zur Bestimmung der senkrechten Veränderung der Steifheit und Festigkeit des Materials in einem wichtigen amerikanischen Kohlenflöz präsentiert, um Unterlagen für realistische Modellbildung zum Zwecke der Spannungsberechnung zu liefern. Der Flöz ist in vier Zonen unterteilt, deren Daten statistisch untersucht wurden. Es ergab sich, daß dieser Flöz zwei Zonen mit meßbar unterschiedlichen Eigenschaften enthält; diese Unterschiede sind aber klein im Vergleich zur Streuung der einzelnen Daten.

---

RésuméVariabilité et anisotropie des propriétés mécaniques du banc de charbon de Pittsburgh On a analysé, par échantillons, la variabilité de la résistance et du module d'un banc de charbon épais, avec la profondeur. Le but de l'étude est d'obtenir des valeurs réalistes qui puissent être utilisées dans une analyse par méthodes numériques. Le banc est divisé en quatre zones, et les résultats sont analysés de façon statistique, séparément pour chaque zone. On a conclut que ce banc contient deux zones dont les propriétés mécaniques diffèrent. Cependant ces différences ne dépassent pas l'ordre de grandeur des écarts dans les observations sur chaque zone.

---

---

With 10 Figures  相似文献