排序方式： 共有62条查询结果，搜索用时 359 毫秒
31.
32.
Crack coalescence in rock masses was studied by performing a series of biaxial compresion tests on specimens made of rock-like
material. Specimens of size 63.5 × 27.9 × 20.3 cm, made of 72% silica sand, 16% cement (Type I) and 12% water by weight were
tested. The joint inclination angle was maintained at 45°, while the offset angle i.e. angle between the plane of the joint
and the line that connects the two inner tips of the joints, was changed from 0° to 90° with an increment of 15°. Three levels
of lateral stress were used; 0.35 MPa, 0.7 MPa and 1.5 MPa on each sample. HP data acquisition system was used to record the
data for each sample. In each sample, four LVDTs were fixed to measure the axial and lateral displacement along the sample.
The failure mechanisms were monitored by eye inspection and a magnifier to detect crack initiation and propagation. For each
test, the failure surfaces were investigated to determine the characteristics of each surface. Wing cracks initiated at the
tip of the joint for the low confining stress applied, while at higher confining stresses wing cracks also initiated at the
middle of the joint. Secondary cracks initiated at the tip of the joint due to shear stress. Three modes of failure took place
due to coalescence of the secondary and wing cracks. The bridge inclination was the main variable that controlled the mode
of failure. For bridge inclination of 0°, the coalescence occured due to shear failure and for bridge inclination of 90° the
coalescence occurred due to tensile failure while for the other bridge inclinations coalescence occured due to mixed tensile
and shear failure. 相似文献
33.
Anthropogenic Pb accumulation in forest soils from Lake Clair watershed: Duchesnay experimental forest (Québec, Canada) 总被引：1，自引：0，他引：1
Mineral soil horizons (Ae, Bhf1, Bhf2, Bf, BC and C) were carefully collected from two podzolic soil profiles in the Lake Clair watershed (Québec) in order to assess anthropogenic trace metal accumulation. Petrographic and selective analyses were performed to establish the soil mineralogy and properties. Furthermore, a complete sequential extraction procedure has been applied to help understanding the complex chemical speciation of Pb in forest soils. Chemical speciation of Pb showed a strong vertical gradient: 85% of this metal is mainly partitioned in refractory minerals in the C-horizon whereas in the upper Bhf1 and Ae-horizons, less than 50% of Pb is associated with this fraction. In the Ae-horizon, for example, 35%, 30% and 12% of total Pb, respectively, is associated with the exchangeable, labile organic matter and amorphous Fe-Mn oxides fractions. The distribution of Pb and Cr in the studied forest soils mainly reflects progressive contamination of the watershed by anthropogenic atmospheric sources. The anthropogenic source is indicated by elevated Cr and Pb concentrations in the topsoil (Bhf and Ae) horizons and by strong negative correlation between 206Pb/207Pb ratios and total Pb concentrations. According to these isotopic values, penetration of anthropogenic Pb does not exceed 10 cm in both soil profiles. Below this depth, both Pb concentrations and isotopic ratios remain nearly constant and similar to values observed in pre-anthropogenic sediments from Lake Clair. These values are interpreted as the natural geochemical backgrounds of the watershed. Based on that behaviour, calculated anthropogenic Pb net inputs amounted to between 1.24 and 1.8 g/m2. 相似文献
34.
Ground motion amplifications in the Dinar basin, and contributions of the surface waves generated from basin edges are investigated in frequency and time domains. Amplification functions are computed from the aftershock data of the October 1, 1995 Dinar earthquake (MW=6.4) using the Standard Spectral Ratio method which requires a pair of instruments; one located at the site under investigation (generally on alluvium) and the other on a reference site, preferably a nearby rock site. First, a time window covering the whole signal is used to compute the amplification function, and, successively, the noise, P wave, S wave and the surface wave time windows are used in computation to observe their contributions to the amplification function. It is seen that the maximum amplifications observed at about 2.0 Hz on the amplification functions of the stations located in the basin are largely due to basin edge induced surface waves. These waves have significantly increased the duration of signals recorded within the basin. Particularly, on the vertical component records, the amplitudes of surface waves are larger than the S-wave amplitudes. The periods of waves amplified maximally due to the basin structure coincide with the natural periods of 4–6-story buildings which were heavily damaged in Dinar. This indicates that the site effects may have been important regarding the damage which occurred during the Dinar earthquake of October 1995. 相似文献
35.
The Beyşehir–Hoyran ophiolite is situated in the western part of the Tauride belt (SW Turkey) and crops out at two localities north of the lake Beyşehir. It mainly comprises harzburgitic peridotites that were tectonically emplaced to their present position during the Late Eocene. The ophiolites themselves are tectonically overlain by either slope basin deposits with lava blocks (Eğirler formation) or massive Triassic limestone blocks (Deliktaş formation). High-grade sub-ophiolitic metamorphic rocks, i.e. epidote amphibolite, amphibolite, and pyroxene amphibolite, together with minor quartzite and calcschist, are observed at the base of the ophiolite sequence, where they occur as thin tectonic slices with an inverted metamorphic gradient. Average P–T conditions of 630–770 °C and c. 6 ± 1.5 kbar are calculated for the metamorphism of the amphibolites by conventional geothermobarometry, corresponding to a burial depth of 18–20 km. Both the sub-ophiolitic metamorphic rocks and the overlying mantle tectonites were intruded by isolated tholeiitic (Nb/Y = 0.041–0.108) diabase dikes, which do not transect the tectonic contact between the two units. Geochemical investigations of the amphibolites of the sub-ophiolitic rock suite show two different geochemical affinities, with the first group being alkaline in character (Nb/Y = 1–3.86) and the second one being tholeiitic (Nb/Y = 0.064–0.13). REE patterns, trace element plots and tectonomagmatic discrimination diagrams indicate that the most probable protoliths for alkaline amphibolites are within-plate type alkali basalts, whereas those of the tholeiitic group resemble tholeiitic island arc basalts. Similarities between the geochemical characteristics of the amphibolites and those of the volcanic rocks of the Eğirler formation strongly suggest that the latter are the protoliths of the amphibolites. 相似文献
36.
Omer Aziz Tahir Hussain Matee Ullah Asher Samuel Bhatti Aamir Ali 《Marine Geophysical Researches》2018,39(4):491-508
The exploration and production of unconventional resources has increased significantly over the past few years around the globe to fulfill growing energy demands. Hydrocarbon potential of these unconventional petroleum systems depends on the presence of significant organic matter; their thermal maturity and the quality of present hydrocarbons i.e. gas or oil shale. In this work, we present a workflow for estimating Total Organic Content (TOC) from seismic reflection data. To achieve the objective of this study, we have chosen a classic potential candidate for exploration of unconventional reserves, the shale of the Sembar Formation, Lower Indus Basin, Pakistan. Our method includes the estimation of TOC from the well data using the Passey’s ΔlogR and Schwarzkofp’s methods. From seismic data, maps of Relative Acoustic Impedance (RAI) are extracted at maximum and minimum TOC zones within the Sembar Formation. A geostatistical trend with good correlation coefficient (R2) for cross-plots between TOC and RAI at well locations is used for estimation of seismic based TOC at the reservoir scale. Our results suggest a good calibration of TOC values from seismic at well locations. The estimated TOC values range from 1 to 4% showing that the shale of the Sembar Formation lies in the range of good to excellent unconventional oil/gas play within the context of TOC. This methodology of source rock evaluation provides a spatial distribution of TOC at the reservoir scale as compared to the conventional distribution generated from samples collected over sparse wells. The approach presented in this work has wider applications for source rock evaluation in other similar petroliferous basins worldwide. 相似文献
37.
Omer L. Sen Deniz Bozkurt John B. Vogler Jefferson Fox Thomas W. Giambelluca Alan D. Ziegler 《Climatic change》2013,118(2):213-226
Regional climate model simulations with RegCM3 were performed to investigate how future land-cover/land-use (LCLU) change in Montane Mainland Southeast Asia (MMSEA) could affect regional climate. Simulation land-surface parameterizations included present day and plausible 2050 land-covers, as well as two extreme deforestation simulations. In the simulations, the original land cover map of RegCM3, based on AVHRR 1992–93 observations, was replaced with one obtained from MODIS 2001 observations; and the model was set to work at two different spatial resolutions using the sub-grid feature of the land surface model: 27.79 km for the atmosphere and 9.26 km for the land surface. During validation, modeled precipitation closely matched observed precipitation over southern China, but underestimated precipitation in the Indochina Peninsula. The plausible 2050 LCLU simulation predicted little change in regional climate. However, an extreme irrigated crop parameterization caused precipitation to increase slightly in the Indochina Peninsula, decrease substantially in southeastern China, and increase significantly in the South China Sea. The extreme short-grass parameterization caused substantial precipitation decreases in MMSEA, but few changes elsewhere. These simulations indicate in order for significant climatological changes to occur, substantially more LCLU conversion is required than the 16 % change we incorporated into the plausible 2050 land-cover scenario. 相似文献
38.
39.
Low‐temperature thermochronology provides information on the timing of rifting and denudation of passive margins, and the Red Sea with its well‐exposed, young rift margins is a suitable setting for its application. Here we present new apatite fission‐track (AFT) data from Sudan northern hinterland and Red Sea coastal areas. From the former region we obtained ages between 270 ± 2 Ma ad 253 ± 53 Ma, and from the coastal belt between 83 ± 8 Ma and 39 ± 7 Ma. These data prompted a review and comparison with low‐temperature thermochronological data from the whole Nubian Red Sea Margin, and a discussion on their implication in assessing the margin evolutionary style. AFT data are available for Egypt and Eritrea as well as apatite (U‐Th)/He (AHe) ages for two transects transversal to the margin in Eritrea. Both in Egypt and Eritrea AFT data record a cooling event at about 20–25 Ma (Early Miocene) and an earlier, more local, cooling event in Egypt at about 34 Ma (Early Oligocene). The thermal modeling of the Sudan samples provides an indication of a rapid cooling in Miocene times, but does not support nor rules out an Early Oligocene cooling phase. The re‐assessment of new and existing thermochronological data within the known geological framework of the Nubian and conjugate Arabian margins favours the hypothesis that early rifting stages were affecting the whole Gulf of Suez–Red Sea–Gulf of Aden system since the Oligocene. These precocious, more attenuated, phases were followed by major extension in Miocene times. As to the mode of margin evolution, AFT age patterns both in Egypt and Eritrea are incompatible with a downwarp model. The distribution of AHe ages across the Eritrean coastal plain suggests that there the escarpment was evolving predominantly by plateau degradation. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
40.
Omer Nawaf Maaitah 《Geotechnical and Geological Engineering》2012,30(6):1345-1356
Soil treatment is commonly resorted in order to improve the strength, stiffness properties of road foundations, and reduce the swelling potential of expansive soils. In Jordan, considerable amount of construction activity is carried out at relatively shallow depths where soil is likely to be unsaturated and subjected to low stresses level. Road damage is frequently observed when it is founded on weak sub-grade in Karak. Therefore, chemical stabilization of the base course, sub base course and sub-grade is essential. The soil will be treated by using sodium silicate and lime with different percentages. An experimental program was designed to study the behavior of soil as the percent of additive agent changes. The results showed that; the geotechnical properties have been improved when soil is treated by mixing lime and sodium silicate. The initial consumption of lime is of 4 and 2?% for sodium silicate. The reaction time is a significant parameter where strength improves as time increases. 相似文献