Influence of the total atmospheric optical depth and cloud cover on solar irradiance components     

K. O. Ogunjobi  Y. J. Kim  Z. He   《Atmospheric Research》2004,70(3-4):209-227

Broadband solar irradiance data obtained in the spectral range 400–940 nm at Kwangju, South Korea from 1999–2000 have been analyzed to investigate the effects of cloud cover and atmospheric optical depth on solar radiation components. Results from measurements indicate that the percentage of direct and diffuse horizontal components of solar irradiance depend largely on total optical depth (TOD) and cloud cover. During summer and spring, the percentages of diffuse solar irradiance relative to the global irradiance were 5.0% and 4.9% as compared to 2.2% and 3.0% during winter and autumn. The diffuse solar irradiance is higher than the direct in spring and summer by 24.2%, and 40.6%, respectively, which may largely be attributed to the attenuation (scattering) of radiation by heavy dust pollution and large cloud amount. In cloud-free conditions with cloud cover ≤2/10, the fraction of the direct and diffuse components were 66.0% and 34.0%, respectively, with a mean daily global irradiance value of 7.92±2.91 MJ m⁻² day⁻¹. However, under cloudy conditions (with cloud cover ≥8/10), the diffuse and direct fractions were 97.9% and 2.2% of the global component, respectively. The annual mean TOD under cloudless conditions (cloud cover≤2/10) yields 0.74±0.33 and increased to as much as 3.15±0.67 under cloudy conditions with cloud amount ≥8/10. An empirical formula is derived for estimating the diffuse and direct components of horizontal solar irradiance by considering the total atmospheric optical depth (TOD). Results from statistical models are shown for the estimation of solar irradiance components as a function of TOD with sufficient accuracy as indicated by low standard error for each solar zenith angle (SZA).  相似文献   

Estimation of Site Effects in Beijing City   总被引：6，自引：0，他引：6  

Z. Ding  Y. T. Chen  G. F. Panza 《Pure and Applied Geophysics》2004,161(5-6):1107-1123

— For the realistic modeling of the seismic ground motion in lateral heterogeneous anelastic media, the database of 3-D geophysical structures for Beijing City has been built up to model the seismic ground motion in the City, caused by the 1976 Tangshan and the 1998 Zhangbei earthquakes. The hybrid method, which combines the modal summation and the finite-difference algorithms, is used in the simulation. The modeling of the seismic ground motion, for both the Tangshan and the Zhangbei earthquakes, shows that the thick Quaternary sedimentary cover amplifies the peak values and increases the duration of the seismic ground motion in the northwestern part of the City. Therefore the thickness of the Quaternary sediments in Beijing City is the key factor controling the local ground effects. Four zones are defined on the base of the different thickness of the Quaternary sediments. The response spectra for each zone are computed, indicating that peak spectral values as high as 0.1 g are compatible with past seismicity and can be well exceeded if an event similar to the 1697 Sanhe-Pinggu occurs.  相似文献   

Geophysical exploration for interlayer slip breccia gold deposits: example from Pengjiakuang gold deposit, Shandong Province, China     

Z. Qingdong  S. Yuanchao  L. Tiebing  L. Guangming  Z. Qirui  S. Kunfa  L. Hongchen  S. Xiuying  Y. Jinzhong 《Geophysical Prospecting》2004,52(2):97-108

Interlayer slipping breccia‐type gold deposit – a new type of gold deposit, defined recently in the northern margin of the Jiaolai Basin, Shandong Province, China – occurs in interlayer slip faults distributed along the basin margin. It has the features of large orebody thickness (ranging from 14 m to 46 m, with an average thickness of 30 m), shallow embedding (0–50 m thickness of cover), low tenor of gold ore (ranging from 3 g/t to 5 g/t), easy mining and ore dressing. This type of gold deposit has promising metallogenic forecasting and potential for economic exploitation. A ground gamma‐ray survey in the Pengjiakuang gold‐ore district indicates that the potassium/thorium ratio is closely related to the mineralization intensity, i.e. the larger the potassium/thorium ratio, the higher the mineralization. The gold mineralized alteration zone was defined by a potassium/thorium ratio of 0.35. A seismic survey confirms the location of the top and bottom boundaries and images various features within the Pengjiakuang gold mineralization belt. The gold‐bearing shovel slipped belt dips to the south at an angle of 50–55° at the surface and 15–20° at depth. The seismic profile is interpreted in terms of a structural band on the seismic section characterized by a three‐layered model. The upper layer is represented by weakly discontinuous reflections that represent the overlying conglomerates. A zone of stronger reflections representing the interlayer slip fault (gold‐bearing mineralized zone) is imaged within the middle of the section, while the strongest reflections are in the lower part of the section and represent metamorphic rocks at depth. At the same time, the seismic reflection survey confirms the existence of a granite body at depth, indicating that ore‐forming fluids may be related to the granite. A CSAMT survey showed that the gold‐bearing mineralized zone is a conductive layer and contains a low‐resistivity anomaly ranging from 2 Ωm to 200 Ωm.  相似文献   

Pedogenic factors affecting magnetic susceptibility of the last interglacial palaeosol S1 in the Chinese Loess Plateau     

Z.‐D. Feng  H. B. Wang  C. G. Olson 《地球表面变化过程与地形》2004,29(11):1389-1402

The magnetic susceptibility has been used as a quantitative or semi‐quantitative proxy for reconstructing the summer monsoon intensity in the Chinese Loess Plateau based on extensive studies on climatic or/and environmental mechanisms producing the magnetic susceptibility signatures. However, the precise nature of the link between past climates and the susceptibility signatures has remained uncertain primarily due to lack of our understanding in the ?nalizing and preserving processes of the signatures. This paper attempts to examine the reliability or acceptability of this summer monsoon proxy from non‐magnetic perspectives of soil‐forming processes. We chose nine sections along two transects: one across the western part of the Chinese Loess Plateau and another across the eastern part. Several conclusions can be drawn from our analytical data. First, clay translocation within the S1 palaeosol pro?les, as indicated by ?eld‐observed clay coatings on ped faces in Bt and Bk horizons and demonstrated by laboratory‐analysed clay contents, must have moved some of the magnetic minerals downward so that the susceptibility re?ects only the post‐translocation distribution of the magnetic‐susceptibility‐producing minerals. Second, the best‐developed palaeosol S1S3 at most of the sections studied is not expressed by the magnetic susceptibility because this palaeosol developed in underlying coarse loess (L2) and coarse textures tend to lower the susceptibility. Third, carbonate concentration is normally negatively correlated with the magnetic susceptibility or simply suppresses the magnetic susceptibility peak when the susceptibility enhancement exceeds the carbonate dilution effect. To conclude, extreme caution must be observed when using magnetic susceptibility signatures to retrieve high‐resolution records of the last interglacial palaeoclimate in the Chinese Loess Plateau. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

The effect of an interface boundary layer on the resonance properties of a buried structure     

Y. S. Karinski  V. V. Shershnev  D. Z. Yankelevsky 《地震工程与结构动力学》2004,33(2):227-247

This paper presents a model for the analysis of the diffraction of plane waves at a cavity in an infinite homogeneous linear elastic medium supported by a segmented lining. An elastic boundary layer is introduced between the cavity lining and the infinite medium. The boundary layer is simulated by ‘elastic boundary conditions’ in which the stress is proportional to the relative displacement of the lining and of the surrounding medium boundary. A closed‐form analytical solution of the problem was obtained using the Fourier–Bessel series, the convergence of which was proven. It was shown that the number of series terms required to obtain a desired level of accuracy can be determined in advance. Using amplitude–frequency response analysis it was shown that the boundary layer produces additional ‘pseudo‐resonance’ frequencies that depend on the layer properties. These frequencies are almost identical to the eigenvalues obtained from the simple analysis of a segmented elastically supported lining. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Estimate of Loading Rate for a TBM Machine Based on Measured Cutter Forces   总被引：1，自引：1，他引：1  

Z. X. Zhang 《Rock Mechanics and Rock Engineering》2004,37(3):239-248

  相似文献   

Conditions of pocket formation in the Oktyabrskaya tourmaline-rich gem pegmatite (the Malkhan field, Central Transbaikalia, Russia)     

Igor S. Peretyazhko  Victor Ye. Zagorsky  Sergey Z. Smirnov  Mikhail Y. Mikhailov 《Chemical Geology》2004,210(1-4):91-111

Coexisting melt (MI), fluid-melt (FMI) and fluid (FI) inclusions in quartz from the Oktaybrskaya pegmatite, central Transbaikalia, have been studied and the thermodynamic modeling of PVTX-properties of aqueous orthoboric-acid fluids has been carried out to define the conditions of pocket formation. At room temperature, FMI in early pocket quartz and in quartz from the coarse-grained quartz–oligoclase host pegmatite contain crystalline aggregates and an orthoboric-acid fluid. The portion of FMI in inclusion assemblages decreases and the volume of fluid in inclusions increases from the early to the late growth zones in the pocket quartz. No FMI have been found in the late growth zones. Significant variations of solid/fluid ratios in the neighboring FMI result from heterogeneous entrapment of coexisting melts and fluids by a host mineral. Raman spectroscopy, SEM EDS and EMPA indicate that the crystalline aggregates in FMI are dominated by mica minerals of the boron-rich muscovite–nanpingite CsAl₂[AlSi₃O₁₀](OH,F)₂ series as well as lepidolite. Topaz, quartz, potassium feldspar and several unidentified minerals occur in much lower amounts. Fluid isolations in FMI and FI have similar total salinity (4–8 wt.% NaCl eq.) and H₃BO₃ contents (12–16 wt.%). The melt inclusions in host-pegmatite quartz homogenize at 570–600 °C. The silicate crystalline aggregates in large inclusions in pocket quartz completely melt at 615 °C. However, even after those inclusions were significantly overheated at 650±10 °C and 2.5 kbar during 24 h they remained non-homogeneous and displayed two types: (i) glass+unmelted crystals and (ii) fluid+glass. The FMI glasses contain 1.94–2.73 wt.% F, 2.51 wt.% B₂O₃, 3.64–5.20 wt.% Cs₂O, 0.54 wt.% Li₂O, 0.57 wt.% Ta₂O₅, 0.10 wt.% Nb₂O₅, 0.12 wt.% BeO. The H₂O content of the glass could exceed 12 wt.%. Such compositions suggest that the residual melts of the latest magmatic stage were strongly enriched in H₂O, B, F, Cs and contained elevated concentrations of Li, Be, Ta, and Nb. FMI microthermometry showed that those melts could have crystallized at 615–550 °C.

Crystallization of quartz–feldspar pegmatite matrix leads to the formation of H₂O-, B- and F-enriched residual melts and associated fluids (prototypes of pockets). Fluids of different compositions and residual melts of different liquidus–solidus P–T-conditions would form pockets with various internal fluid pressures. During crystallization, those melts release more aqueous fluids resulting in a further increase of the fluid pressure in pockets. A significant overpressure and a possible pressure gradient between the neighboring pockets would induce fracturing of pockets and “fluid explosions”. The fracturing commonly results in the crushing of pocket walls, formation of new fractures connecting adjacent pockets, heterogenization and mixing of pocket fluids. Such newly formed fluids would interact with a primary pegmatite matrix along the fractures and cause autometasomatic alteration, recrystallization, leaching and formation of “primary–secondary” pockets.  相似文献   

Focal mechanism dependence of static stress triggering of earthquakes   总被引：6，自引：0，他引：6  

Y.G. Wan  Z.L. Wu  G.W. Zhou 《Tectonophysics》2004,390(1-4):235-243

We perform a global statistical investigation into the problem of Coulomb stress triggering of earthquakes by using the Harvard CMT catalogue of shallow earthquakes from 1976 to 2001. We consider ‘earthquake pairs’, i.e., pairs of successive earthquakes occurring near each other with similar focal mechanisms, and address the problem of whether or not the change of the Coulomb failure stress (CFS) produced by the first earthquake of the pair ‘encourages’ the occurrence of the second one. An interesting feature is that such a Coulomb stress-triggering phenomenon has an apparent focal mechanism dependence: for thrust earthquakes, a more evident triggering effect can be observed.  相似文献   

Effect of salinity on chlorophyll concentration, leaf area, yield and yield components of rice genotypes grown under saline environment     

Y. Ali  Z. Aslam  M. Y. Ashraf  G. R. Tahir 《International Journal of Environmental Science and Technology》2004,1(3):221-225

Salt tolerance in eighteen advanced rice genotypes was studied under an artificially salinized (EC=8.5 dSm^?1) soil conditions after 90 days of transplanting. The results showed that the yield per plant, chlorophyll concentrations, fertility percentage, and number of productive tillers, panicle length and number of primary braches per panicle of all the genotypes were reduced by salinity. However, genotypes viz. Jhona-349 x Basmati-370, NR-1, DM-59418, DM-63275, DM-64198 and DM-38-88 showed better salinity tolerance than others.  相似文献   

Impact of inner core rotation on outer core flow: the role of outer core viscosity     

J. Y. Guo  P. M. Mathews  Z. X. Zhang  J. S. Ning 《Geophysical Journal International》2004,159(1):372-389

  相似文献