Autonomic visiting in digital 3D scenes     

Song Chen  Liang Cheng 《Earth Science Informatics》2016,9(3):383-400

Human-machine interactive visiting and fixed-route visiting are currently the main roaming modes in digital three-dimensional (3D) scenes. However, in general, when a person visits an attraction area, s/he does not follow a fixed path, but instead wander about according to his/her interests. Here, we propose a new roaming mode, called autonomic visiting. That is, in a digital 3D scene, a user selects several interest spots, then a route connecting these spots can be automatically determined and 3D scene can be seen along this route. This study presents a technical approach that enables the realization of autonomic visiting in 3D scenes. Firstly, Delaunay triangular meshes for the terrain in 3D scene are established. Secondly, a plane-growth algorithm and a line-connection algorithm are introduced to automatically mend the broken parts of these triangular meshes. Thirdly, the triangular meshes are then merged and differently weighted according to different layers. Finally, a progress-zone transmission algorithm is presented to optimal the shortest route, which is derived from A-Star (A*) algorithm. Digital 3D campus of Nanjing University, China, is taken as the experimental materials. The experimental results prove the effect of the proposed approach.  相似文献   

An experimental database for the development,calibration and verification of constitutive models for sand with focus to cyclic loading: part I—tests with monotonic loading and stress cycles     

Torsten Wichtmann  Theodoros Triantafyllidis 《Acta Geotechnica》2016,11(4):739-761

For numerical studies of geotechnical structures under earthquake loading, aiming to examine a possible failure due to liquefaction, using a sophisticated constitutive model for the soil is indispensable. Such a model must adequately describe the material response to a cyclic loading under constant volume (undrained) conditions, amongst others the relaxation of effective stress (pore pressure accumulation) or the effective stress loops repeatedly passed through after a sufficiently large number of cycles (cyclic mobility, stress attractors). The soil behaviour under undrained cyclic loading is manifold, depending on the initial conditions (e.g. density, fabric, effective mean pressure, stress ratio) and the load characteristics (e.g. amplitude of the cycles, application of stress or strain cycles). In order to develop, calibrate and verify a constitutive model with focus to undrained cyclic loading, the data from high-quality laboratory tests comprising a variety of initial conditions and load characteristics are necessary. The purpose of these two companion papers was to provide such database collected for a fine sand. The database consists of numerous undrained cyclic triaxial tests with stress or strain cycles applied to samples consolidated isotropically or anisotropically. Monotonic triaxial tests with drained or undrained conditions have also been performed. Furthermore, drained triaxial, oedometric or isotropic compression tests with several un- and reloading cycles are presented. Part I concentrates on the triaxial tests with monotonic loading or stress cycles. All test data presented herein will be available from the homepage of the first author. As an example of the examination of an existing constitutive model, the experimental data are compared to element test simulations using hypoplasticity with intergranular strain.  相似文献   

Shearing characteristics of SCP-inserted clay specimens in triaxial compression test     

Yoon-Sik Choo  Wanjei Cho  Choong-Ki Chung 《Acta Geotechnica》2016,11(1):209-219

Sand compaction piles (SCPs) have been widely applied to the construction on the soft ground for decades, due to not only the acceleration of the consolidation but also the enhancement of strength and stiffness of ground. However, physical behaviors of SCP-improved ground have not been clearly unveiled due to complex response of two distinct materials, compacted sand and soft clay, which are having quite different mechanical characteristics. Therefore, in this study, the mechanical characteristics of SCP composite ground were investigated via triaxial compression tests on SCP-inserted clay specimens. Tests were performed elaborately with four specimens with different replacement ratios. Based on the comparisons of consolidation and shearing behaviors of tested SCP-inserted clay specimens, the SCP effects on the stiffness and strength are also investigated. Even though the SCP-inserted clay specimens show stronger and stiffer behaviors than clay-only specimens, the effects vary on strength, stiffness, and volume change with regard to the applied replacement ratios.  相似文献   

Sand eddies induced by cyclic tilt of a retaining wall     

Chien-Hsun Chen  Dimitrios Kolymbas 《Acta Geotechnica》2016,11(2):269-280

The cyclic tilt of a retaining wall induces a peculiar motion in the backfill (sand), which exhibits closed trajectories (eddies). In this paper, the motion of the backfill has been optically traced and analyzed by means of particle image velocimetry, also known as digital image correlation. The results are of importance for cyclically loaded structures (e.g, piles for off-shore structures) and can also serve to test numerical simulations of large deformation.  相似文献   

Effects of grain morphology on critical state: a computational analysis     

Alex X. Jerves  Reid Y. Kawamoto  José E. Andrade 《Acta Geotechnica》2016,11(3):493-503

We introduce a new DEM scheme (LS-DEM) that takes advantage of level sets to enable the inclusion of real grain shapes into a classical discrete element method. Then, LS-DEM is validated and calibrated with respect to real experimental results. Finally, we exploit part of LS-DEM potentiality by using it to study the dependency of critical state (CS) parameters such as critical state line (CSL) slope \(\lambda \), CSL intercept \(\varGamma \), and CS friction angle \(\varPhi _{\mathrm{CS}}\) on the grain’s morphology, i.e., sphericity, roundness, and regularity. This study is carried out in three steps. First, LS-DEM is used to capture and simulate the shape of five different two-dimensional cross sections of real grains, which have been previously classified according to the aforementioned morphological features. Second, the same LS-DEM simulations are carried out for idealized/simplified grains, which are morphologically equivalent to their real counterparts. Third, the results of real and idealized grains are compared, so the effect of “imperfections” on real particles is isolated. Finally, trends for the CS parameters (CSP) dependency on sphericity, roundness, and regularity are obtained as well as analyzed. The main observations and remarks connecting particle’s morphology, particle’s idealization, and CSP are summarized in a table that is attempted to help in keeping a general picture of the analysis, results, and corresponding implications.  相似文献   

Impacts of mineralogical compositions on different trapping mechanisms during long-term CO<Subscript>2</Subscript> storage in deep saline aquifers     

Kairan Wang  Tianfu Xu  Hailong Tian  Fugang Wang 《Acta Geotechnica》2016,11(5):1167-1188

Deep saline aquifers in sedimentary basins are considered to have the greatest potential for CO₂ geological storage in order to reduce carbon emissions. CO₂ injected into a saline sandstone aquifer tends to migrate upwards toward the caprock because the density of the supercritical CO₂ phase is lower than that of formation water. The accumulated CO₂ in the upper portions of the reservoir gradually dissolves into brine, lowers pH and changes the aqueous complexation, whereby induces mineral alteration. In turn, the mineralogical composition could impose significant effects on the evolution of solution, further on the mineralized CO₂. The high density of aqueous phase will then move downward due to gravity, give rise to “convective mixing,” which facilitate the transformation of CO₂ from the supercritical phase to the aqueous phase and then to the solid phase. In order to determine the impacts of mineralogical compositions on trapping amounts in different mechanisms for CO₂ geological storage, a 2D radial model was developed. The mineralogical composition for the base case was taken from a deep saline formation of the Ordos Basin, China. Three additional models with varying mineralogical compositions were carried out. Results indicate that the mineralogical composition had very obvious effects on different CO₂ trapping mechanisms. Specific to our cases, the dissolution of chlorite provided Mg²⁺ and Fe²⁺ for the formation of secondary carbonate minerals (ankerite, siderite and magnesite). When chlorite was absent in the saline aquifer, the dominant secondary carbon sequestration mineral was dawsonite, and the amount of CO₂ mineral trapping increased with an increase in the concentration of chlorite. After 3000 years, 69.08, 76.93, 83.52 and 87.24 % of the injected CO₂ can be trapped in the solid (mineral) phase, 16.05, 11.86, 8.82 and 6.99 % in the aqueous phase, and 14.87, 11.21, 7.66 and 5.77 % in the gas phase for Case 1 through 4, respectively.  相似文献   

Tailings composition effects on shear strength behavior of co-mixed mine waste rock and tailings   总被引：1，自引：0，他引：1  

Megan M. Jehring  Christopher A. Bareither 《Acta Geotechnica》2016,11(5):1147-1166

The objective of this study was to evaluate the effect of mine tailings composition on shear behavior and shear strength of co-mixed mine waste rock and tailings (WR&T). Crushed gravel was used as a synthetic waste rock and mixed with four types of tailings: (1) fine-grained garnet, (2) coarse-grained garnet, (3) copper, and (4) soda ash. Co-mixed WR&T specimens were prepared to target mixture ratios of mass of waste rock to mass of tailings (R) such that tailings “just filled” interparticle void space of the waste rock (i.e., optimum mixture ratio, R _opt). Triaxial compression tests were conducted on waste rock, tailings, and mixed waste at effective confining stresses (\(\sigma_{\text{c}}^{{\prime }}\)) ranging from 5 to 40 kPa to represent stresses anticipated in final earthen covers for waste containment facilities. Waste rock and co-mixed WR&T specimens were 150 mm in diameter by 300 mm tall, whereas tailings specimens were 38 mm in diameter by 76 mm tall. Shear strength was quantified using effective stress friction angles (?′) from undrained tests: ?′ for waste rock was 37°, ?′ for tailings ranged from 34° to 41°, and ?′ for WR&T mixtures ranged from 38° to 40°. Thus, shear strength of co-mixed WR&T was comparable to waste rock regardless of tailings composition. Shear behavior of WR&T mixtures was a function of R and tailings composition. Tailings influenced shear behavior for R < R _opt and when tailings predominantly were silt. Shear behavior was influenced by waste rock for R ≥ R _opt and when tailings predominantly were sand or included clay particles.  相似文献   

Soil and water conservation in mining area based on ground surface subsidence control: development of a high-water swelling material and its application in backfilling mining     

Ailong Wang  Liqiang Ma  Zhongwei Wang  Dongsheng Zhang  Ke Li  Yao Zhang  Xingjun Yi 《Environmental Earth Sciences》2016,75(9):779

  相似文献   

Nanomechanics of organic-rich shales: the role of thermal maturity and organic matter content on texture   总被引：2，自引：2，他引：0  

Sara Abedi  Mirna Slim  Franz-Josef Ulm 《Acta Geotechnica》2016,11(4):775-787

Despite the importance of organic-rich shales, microstructural characterization and theoretical modeling of these rocks are limited due to their highly heterogeneous microstructure, complex chemistry, and multiscale mechanical properties. One of the sources of complexity in organic-rich shales is the intricate interplay between microtextural evolution and kerogen maturity. In this study, a suite of experimental and theoretical microporomechanics methods are developed to associate the mechanical properties of organic-rich shales both to their maturity level and to the organic content at micrometer and sub-micrometer length scales. Recent results from chemomechanical characterization experiments involving grid nanoindentation and energy-dispersive X-ray spectroscopy (EDX) are used in new micromechanical models to isolate the effects of maturity levels and organic content from the inorganic solids. These models enable attribution of the role of organic maturity to the texture of the indented material, with immature systems exhibiting a matrix-inclusion morphology, while mature systems exhibit a polycrystal morphology. Application of these models to the interpretation of nanoindentation results on organic-rich shales allows us to identify unique clay mechanical properties that are consistent with molecular simulation results for illite and independent of the maturity of shale formation and total organic content. The results of this investigation contribute to the design of a multiscale model of the fundamental building blocks of organic-rich shales, which can be used for the design and validation of multiscale predictive poromechanics models.  相似文献   

Strength criterion for cross-anisotropic sand under general stress conditions     

Xilin Lü  Maosong Huang  José E. Andrade 《Acta Geotechnica》2016,11(6):1339-1350

By incorporating the fabric effect and Lode’s angle dependence into the Mohr–Coulomb failure criterion, a strength criterion for cross-anisotropic sand under general stress conditions was proposed. The obtained criterion has only three material parameters which can be specified by conventional triaxial tests. The formula to calculate the friction angle under any loading direction and intermediate principal stress ratio condition was deduced, and the influence of the degree of the cross-anisotropy was quantified. The friction angles of sand in triaxial, true triaxial, and hollow cylinder torsional shear tests were obtained, and a parametric analysis was used to detect the varying characteristics. The friction angle becomes smaller when the major principal stress changes from perpendicular to parallel to the bedding plane. The loading direction and intermediate principal stress ratio are unrelated in true triaxial tests, and their influences on the friction angle can be well captured by the proposed criterion. In hollow cylinder torsional shear tests with the same internal and external pressures, the loading direction and intermediate principal stress ratio are related. This property results in a lower friction angle in the hollow cylinder torsional shear test than that in the true triaxial test under the same intermediate principal stress ratio condition. By comparing the calculated friction angle with the experimental results under various loading conditions (e.g., triaxial, true triaxial, and hollow cylinder torsional shear test), the proposed criterion was verified to be able to characterize the shear strength of cross-anisotropic sand under general stress conditions.  相似文献