Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera   总被引：1，自引：0，他引：1  

DAWEI WANG  YUAN WANG  BIN YANG  WEI ZHANG† 《Sedimentology》2008,55(2):461-470

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.  相似文献   

Development and application of a GIS-based tool for earthquake-induced hazard prediction     

Chang-Guk Sun  Sung-Ho Chun  Tae-Gyun Ha  Choong-Ki Chung  Dong-Soo Kim   《Computers and Geotechnics》2008,35(3):436-449

An integrated GIS-based tool (GTIS) was constructed to estimate site effects related to the earthquake hazards in the Gyeongju area of Korea. To build the GTIS for the study area, intensive site investigations and geotechnical data collections were performed and a walk-over site survey was additionally carried out to acquire surface geo-knowledge data in accordance with the procedure developed to build the GTIS. For practical applications of the GTIS used to estimate the site effects associated with the amplification of ground motion, seismic microzoning maps of the characteristic site period and the mean shear wave velocity to a depth of 30 m were created and presented as a regional synthetic strategy addressing earthquake-induced hazards. Additionally, based on one-dimensional site response analyses, various seismic microzoning maps for short- and mid-period amplification potentials were created for the study area. Case studies of seismic microzonations in the Gyeongju area verified the usefulness of the GTIS for predicting seismic hazards in the region.  相似文献   

A practical approach to grain shape quantification     

Melissa R. Cox  Muniram Budhu 《Engineering Geology》2008,96(1-2):1-16

Grain shape is a key factor affecting the mechanical properties of granular materials. However, grain shape quantification techniques to distinguish one granular material from another have not reached a stage of development for inclusion in modeling the behavior of granular materials. Part of the problem is the equipment of choice for grain shape measurement is the scanning electron microscopes. This is a relatively expensive and complex device. In this paper, we investigate a practical approach using light microscopy to quantify grain shape and to identify the key shape parameters that can distinguish grains. A light microscope was found to produce grain images with sufficient quality for the purpose of observing the grain shape profile. Several grain shape parameters were determined for eight different sands. We found Circularity, Roundness, Compactness, Sphericity, Aspect Ratio and ModRatio to be the key shape parameters that differentiate these sand grains.  相似文献   

Ex situ target strength of rockfish (Sebastes schlegeli) and red sea bream (Pagrus major) in the Northwest Pacific   总被引：2，自引：0，他引：2  

Kang  Donhyug; Hwang  Doojin 《ICES Journal of Marine Science》2003,60(3):538-543

  相似文献   

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area     

Dong Soo Kim  Byoung Chul Lee 《Marine Georesources & Geotechnology》2005,23(1):117-136

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.  相似文献   

The origin and biogeochemistry of organic matter in surface sediments of Lake Shihwa and Lake Hwaong     

Eun -Ji Won  Hyen -Goo Cho  Kyung -Hoon Shin 《Ocean Science Journal》2007,42(4):223-230

To understand the origin and biogeochemistry of the organic matter in surface sediments of Lake Shihwa and Lake Hwaong, organic nitrogen, inorganic nitrogen, labile organic carbon, and residual organic carbon contents as well as stable isotope ratios for carbon and nitrogen were determined by KOBr-KOH treatment. Ratios of organic carbon to organic nitrogen (C_org/N_org) (mean = 24) were much higher than ratios of organic carbon to total nitrogen (C_org/N_tot) (mean=12), indicating the presence of significant amounts of inorganic nitrogen in the surface sediments of both lakes. Stable isotope ratios for organic nitrogen were, on average, 5.2‰ heavier than ratios of inorganic nitrogen in Lake Shihwa, but those same ratios were comparable in Lake Hwaong. This might be due to differences in the origin or the degree of degradation of sedimentary organic matter between the two lakes. In addition, stable isotope ratios for labile organic carbon were, on average, 1.4‰ heavier than those for residual organic carbon, reflecting the preferential oxidation of¹³C-enriched organic matter. The present study demonstrates that KOBr-KOH treatment of sedimentary organic matter can provide valuable information for understanding the origin and degradation state of organic matter in marine and brackish sediments. This also suggests that the ratio of C_org/N_org and stable isotope ratios for organic nitrogen can be used as indexes of the degree of degradation of organic matter.  相似文献   

The contact binary system YY Eri     

E. Budding  C-H. Kim  O. Demircan  Z. Müyesseroğlu  K. Saijo  T. Banks 《Astrophysics and Space Science》1996,246(2):229-242

Relatively new and unanalysed photometric data-sets of the contact binary system YY Eri are presented. The light curves have been analysed using information limit optimization techniques, and the Binary Maker program of Bradstreet (1992).Comparison of the results allows insight into determinacy questions affecting the W UMa type of light curve, which relates to our general understanding of contact binaries. A limiting contact configuration cannot be ruled out on the basis of empirical data-analysis alone.Very careful analysis of the photospheric flux distribution over the surface of the Sun may help establish appropriate values of the gravity brightening parameter for cool dwarf stars. At present, however, empirical photometric information on contact binaries is non-discriminatory: i.e. alternative cosmogonies can find alternative support from available evidence. The implication is then for more and better observational data to allow better real independent parameter determination.  相似文献   

Chemical composition of seawater in Neoproterozoic: Results of fluid inclusion study of halite from Salt Range (Pakistan) and Amadeus Basin (Australia)     

《Precambrian Research》2006,144(1-2):39-51

Data on chemical composition of brines in primary inclusions of marine halites and on mineralogy of marine evaporites and carbonates lead to the conclusion that during the Phanerozoic two long-term cycles of chemical composition of seawater existed. During each of those cycles, seawater dominantly a Na-K-Mg-Ca-Cl (Ca-rich) type changed to a Na-K-Mg-Cl-SO₄ (SO₄-rich) type. Recrystallised halite from the uppermost Neoproterozoic Salt Range Formation (ca. 545 Ma) in Pakistan, contains solitary inclusions indicating SO₄-rich brines. This supports the concept derived from the study on primary fluid inclusions from the Neoproterozoic Ara Formation of Oman; SO₄-rich seawater existed during latest Neoproterozoic time (ca. 545 Ma). In contrast, samples of recrystallised halite from the Bitter Springs Formation (840–830 Ma) in Australia contain inclusion brines that are entirely Ca-rich, indicating that basin brines and seawater were Ca-rich during deposition of central Australian evaporites. These combined data supported by the timing of aragonite and calcite seas suggest that during the Proterozoic, significant oscillations of the chemical composition of marine brines, and seawater, occurred, which are similar to those known to exist during the Phanerozoic. It is suggested that Ca-rich seawater dominated for a substantial period of time (more than 200 Ma), at 650 Ma, this was replaced by SO₄-rich seawater, finally returning to Ca-rich seawater at 530 Ma.  相似文献   

Multi-method study of the characteristic chemical nature of aquatic humic substances isolated from the Han River,Korea   总被引：1，自引：0，他引：1  

《Applied Geochemistry》2006,21(7):1226-1239

Natural organic matter (NOM) from the Han River, Korea was fractionated into humic and non-humic fractions by absorbing onto XAD-7HP, and these fractions were analyzed using UV-absorption, and for dissolved organic C (DOC). The humic fraction (i.e. humic substances; HS) was extracted and its characteristics were compared to commercial humic materials using various spectroscopic methods such as Fourier transform infrared (FT-IR), proton nuclear magnetic resonance (¹H-NMR) and fluorescence spectroscopy. The humic fraction as organic C was 47.0% on the average, however, a rainfall event brought a higher humic fraction into Han River water. The molar ratios of H/C and O/C in the HS from Han River water (HRHS) were 1.40 and 0.76, respectively, and the ratio of aliphatic to aromatic protons in the HS (P_Al/P_Ar ratio) was 5.8. Aromaticity and humification degree (i.e., degree of condensation) of HRHS were relatively lower than those from other humic materials, while the portion of oxygenated functional groups was relatively higher. FT-IR, ¹H-NMR and fluorescence spectroscopy showed distinct differences between HRHS and the commercial humic materials. Commercial humic materials are not representative of HS extracted from Han River water. The fluorescence spectra, relatively simple measurements, were found to be most useful as fingerprints for humic materials from particular sources.  相似文献   

Hydraulic Characteristics of Rough Fractures in Linear Flow under Normal and Shear Load   总被引：19，自引：3，他引：19  

H. S. Lee  T. F. Cho 《Rock Mechanics and Rock Engineering》2002,35(4):299-318

Summary A hydro-mechanical testing system, which is capable of measuring both the flow rates and the normal and shear displacement of a rock fracture, was built to investigate the hydraulic behaviour of rough tension fractures. Laboratory hydraulic tests in linear flow were conducted on rough rock fractures, artificially created using a splitter under various normal and shear loading. Prior to the tests, aperture distributions were determined by measuring the topography of upper and lower fracture surfaces using a laser profilometer. Experimental variograms of the initial aperture distributions were classified into four groups of geostatistical model, though the overall experimental variograms could be well fitted to the exponential model. The permeability of the rough rock fractures decayed exponentially with respect to the normal stress increase up to 5 MPa. Hydraulic behaviours during monotonic shear loading were significantly affected by the dilation occurring until the shear stress reached the peak strength. With the further dilation, the permeability of the rough fracture specimens increased more. However, beyond shear displacement of about 7 to 8 mm, permeability gradually reached a maximum threshold value. The combined effects of both asperity degradation and gouge production, which prohibited the subsequent enlargement of mean fracture aperture, mainly caused this phenomenon. Permeability changes during cyclic shear loading showed somewhat irregular variations, especially after the first shear loading cycle, due to the complex interaction from asperity degradations and production of gouge materials. The relation between hydraulic and mechanical apertures was analyzed to investigate the valid range of mechanical apertures to be applied to the cubic law. Received June 12, 2001; accepted February 26, 2002 Published online September 2, 2002  相似文献