Comet nuclei: Morphology and implied processes of surface modification     

A.T. Basilevsky  H.U. Keller 《Planetary and Space Science》2006,54(8):808-829

Surface morphology and related issues for nuclei of three comets: Halley, Borrelly and Wild 2, are considered in the paper. Joint consideration of publications and results of our analysis of the comets’ images led to conclusions, partly new, partly repeating conclusions published by other researchers. It was found that typical for all three nuclei is the presence of rather flat areas: floors of craters and other depressions, mesas and terraces. This implies that flattening surfaces or planation is a process typical for the comet nuclei. Planation seems to work through the sublimation-driven slope collapse and retreat. This requires effective sublimation so this process should work only when a comet is close to the Sun and if on the nucleus there are starting slopes, steep and high enough to support the “long-distance” avalanching of the collapsing material. If the surface had no starting slopes, then instead of planation, the formation of pitted-and-hilly surfaces should occur. An example of this could be the mottled terrain of the Borelly nucleus. Both ways of the sublimational evolution on the nucleus surface should lead to accumulation of cometary regolith. The thickness of the degassed regolith is not known, but it is obvious that in surface depressions, including the flat-floor ones, it should be larger compared with nondepression areas. This may have implications for the in situ study of comets by the Deep Impact and Rosetta missions.Our morphological analysis puts constraints on the applicability of the popular “rubble-pile comet nucleus” hypothesis (Weissman, 1986. Are cometery nuclei primordial rubble piles? Nature 320, 242-244.). We believe that the rubble pile hypothesis can be applicable to the blocky Halley nucleus. The Borelly and Wild 2 nuclei also could be rubble piles. But in these cases the “rubbles” have to be either smaller than 30-50 m (a requirement to keep lineament geometry close to ideal), or larger than 1-2 km (a requirement to form the rather extended smooth, flat surfaces of mesa tops and crater floors). Another option is that the Borelly and Wild 2 nuclei are not rubble piles.In relation to surface morphology we suggest that three end-member types of the comet nuclei may exist: (1) impact cratered “pristine” bodies, (2) non-cratered fragments of catastrophic disruption, and (3) highly Sun-ablated bodies. In this threefold classification, the Wild 2 nucleus is partially ablated primarily cratered body. Borrelly is significantly ablated and could be either primarily cratered or not-cratered fragment. Halley is certainly partially ablated but with the available images it is difficult to say if remnants of impact craters do exist on it.Recently published observations and early results of analysis of the Tempel 1 nucleus images taken by Deep Impact mission are in agreement with our conclusions on the processes responsible for the Halley, Borrelly and Wild 2 nuclei morphologies. In particular, we have now more grounds to suggest that decrease in crater numbers and increase of the role of smooth flat surfaces in the sequence Wild 2?Tempel 1?Borelli reflects a progress in the sublimational degradation of the nucleus surface during comet passages close to the Sun.  相似文献   

Isotope hydrological study of mean transit time in the granitic Strengbach catchment (Vosges massif,France): application of the FlowPC model with modified input function     

D. Viville  B. Ladouche  T. Bariac 《水文研究》2006,20(8):1737-1751

Measurements of ¹⁸O concentrations in precipitation, soil solution, spring and runoff are used to determine water transit time in the small granitic Strengbach catchment (0·8 km²; 883–1146 m above sea level) located in the Vosges Mountains of northeastern France. Water transit times were calculated by applying the exponential, exponential piston and dispersion models of the FlowPC program to isotopic input (rainfall) and output (spring and stream water) data sets during the period 1989–95. The input function of the model was modified compared with the former version of the model and estimated by a deterministic approach based on a simplified hydrological balance. The fit between observed and calculated output data showed marked improvements compared with results obtained using the initial version of the model. An exponential piston version of the model applied to spring water indicates a 38·5 month mean transit time, which suggests that the volume in the aquifer, expressed in water depth, is 2·4 m. A considerable thickness (>45 m) of fractured bedrock may be involved for such a volume of water to be stored in the aquifer. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

利用自回归模型检测地球极移重力效应     

杨学峰  孙和平  徐建桥 《大地测量与地球动力学》2004,24(2):110-114

同时采用4个台站的国际超导重力仪长期连续重力观测资料和国际地球自转服务中心提供的同步地球自转参数，研究了极移引起的地球重力场变化特征。利用自回归模型估计了各序列的功率谱密度和积谱密度，结果表明极移导致的重力效应的主要能量集中在Chandler摆动和周年项附近，叠积后实际重力观测与极移重力信号理论值之间的差异分别为0．4％和3．9％，说明超导重力仪可有效监测极移导致的重力变化。  相似文献   

空间数据仓库的认知过程   总被引：3，自引：3，他引：0  

吴金华  祝国瑞 《地球科学与环境学报》2004,26(4):67-70

从理论上探讨了空间数据仓库的认知过程．主要是十一个层次的世界模型通过十个算子转换的过程，对十一个层次世界及十个算子概念进行了较详细地讨论，并用代数系统对其进行了定义。  相似文献   

A critical state model for sands dependent on stress and density     

Y.P. Yao  D.A. Sun  T. Luo 《国际地质力学数值与分析法杂志》2004,28(4):323-337

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Plane of elastic non-resisting tension material under foundation structures     

A. Baratta  I. Corbi 《国际地质力学数值与分析法杂志》2004,28(6):531-542

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

描述地壳垂直运动过程的一种函数形式     

杨国华  巩曰沐  卢景忠  韩月萍 《大地测量与地球动力学》1995,(1)

本文在已有数据处理方法的基础上，利用近代数值逼近理论，给出了从时空域角度描述地壳垂直运动过程的一种具体的函数解析形式。最后给出了一个实际算例。  相似文献   

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application     

Daichao Sheng  David W. Smith  Scott W. Sloan  Antonio Gens 《国际地质力学数值与分析法杂志》2003,27(9):767-790

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

居民收入与通信网络市场经济效益研究--以河北省通信网络为实例     

刘江林  李应良  石宏宇 《成都信息工程学院学报》2005,20(6):662-666

利用Logisitic曲线模型和扩展支撑模型对居民可支配收入预测和单项消费预测，以河北省居民的收入及其消费支出为实例，研究了城镇居民和农民的可支配收入分配和单项边际消费倾向，合理建立了预测模型，并理论计算了1999～2003年的通信消费方面的边际消费倾向、预测了2004～2008年通信消费情况。最后，根据预测结果对通信网络建设提出了一些有价值的建议。  相似文献   

基于J2EE架构的企业卡资源管理系统的设计与实现     

任建豪  李成忠 《成都信息工程学院学报》2005,20(5):566-570

介绍了J2EE架构和多层体系结构的发展，在B／S三层架构的基础上给出了包含应用服务器中间件的多层分布式应用体系结构，并把此体系结构应用于电信氽业的有价卡管理系统项目中。分析了此项同的功能结构和体系结构，采用J2EE开发平台和技术设计实现了由浏览器、Web服务器、应用服务器、数据库服务器组成的多层体系架构。  相似文献