重力基准快速测定与分析:以广西重力基点网及格值标定场重建为例          下载免费PDF全文

王林松  马险  陈超  黎海龙  莫亚军  汪利民  柳一鸣 《地球物理学报》2019,62(5):1885-1897

重力基点网是我国开展地质调查、地震监测、测绘等测量工作的重要基础设施,面对原有基点网覆盖面不足且受到不同程度损害这一现状,目前已不能满足开展大比例尺重力调查以及高频率重复监测等工作的需求.本文以广西重力基点网重建为契机,利用A10-022绝对重力仪对全区42个重力基点与2个相对重力仪标定场的绝对重力值进行了测定.整个实施周期涵盖了计量参数校准、全球绝对重力仪国际比对、室内同点重复性以及全网部分基点独立安装检查等较为完整的测量流程,并通过连续运输与观测期间环境因素的记录与对比分析,总结了适合于该类型仪器室外条件下工作的技术手段与应对措施.观测结果表明:利用A10绝对重力仪能够高效率与高精度的完成广西重力基点网室外设计点位测定工作,国际比对及重复性验证确保了本次重建基点结果的可信度;A10采用双模式的氦氖激光频率存在漂移并受温度及气压等多种因素的综合影响,但短期内中心频率未出现较大波动,建议定期对其进行校准;各基点观测误差主要受到台站质量、人文活动及突发事件等环境扰动的影响,并与仪器内外温差存在较高的相关性.本文给出的A10绝对重力仪的参数设计、技术手段与影响因素的详细分析,能够为今后同类型仪器的观测实施提供重要参考,并有助于室外绝对重力观测的全国推广与应用.  相似文献   

Application of multispectral LiDAR to automated virtual outcrop geology     

《ISPRS Journal of Photogrammetry and Remote Sensing》2014

Terrestrial laser scanning (TLS) is a valuable tool for creating virtual 3D models of geological outcrops to enable enhanced modeling and analysis of geologic strata. Application of TLS data is typically limited to the geometric point cloud that is used to create the 3D structure of the outcrop model. Digital photography can then be draped onto the 3D model, allowing visual identification and manual spatial delineation of different rock layers. Automation of the rock type identification and delineation is desirable, and recent work has investigated the use of terrestrial hyperspectral photography for this purpose. However, passive photography, whether visible or hyperspectral, presents several complexities, including accurate spatial registration with the TLS point cloud data, reliance on sunlight for illumination, and radiometric calibration to properly extract spectral signatures of the different rock types. As an active remote sensing method, a radiometrically calibrated TLS system offers the potential to directly provide spectral information for each recorded 3D point, independent of solar illumination. Therefore, the practical application of three radiometrically calibrated TLS systems with differing laser wavelengths, thereby achieving a multispectral dataset in conjunction with 3D point cloud data, is investigated using commercially available hardware and software. The radiometric calibration of the TLS intensity values is investigated and the classification performance of the multispectral TLS intensity and calibrated reflectance datasets evaluated and compared to classification performed with passive visible wavelength imagery. Results indicate that rock types can be successfully identified with radiometrically calibrated multispectral TLS data, with enhanced classification performance when fused with passive visible imagery.  相似文献   

Multi-Beam Echo Sounders–INS Automatic Latency Calibration     

Rabine Keyetieu  Nicolas Seube  Vignyl Djine  Gael Roue  Benoit Clement  Pierre Bosser 《Marine Geodesy》2013,36(5):477-493

Abstract

This paper presents an automatic, rigorous, and robust method to determine a Multi-Beam Echo Sounder (MBES) and Inertial Measurement Unit/Inertial Navigation System (IMU/INS) latency calibration. The latency may be due to the IMU/INS itself, but also to the time-tagging configuration, which is generally left to the survey systems user. One survey strip over a flat seafloor is the required configuration of line for using this approach, called Multibeam IMU/INS Latency Automatic Calibration (MILAC), standing for MBES to IMU/INS Latency Automatic Calibration. The algorithm considers only data with maximum latency effects and integrates an automatic data selection for this purpose. The latency estimation procedure is based on an iterative Least Square adjustment method followed by a statistical analysis. Our process can deal with beam acoustic refraction caused by the speed of sound in sea water. The accuracy of MILAC is about 2?ms (millisecond) and its average precision of 0.15?ms. MILAC is able to determine the latency with an average resolution of 5?ms. However, the morphology of the survey line is restricted to smooth and regular seafloor and the survey platform should have a relatively high attitude rate.  相似文献   

GPS接收机的校准及校准结果的不确定度评估     

贺浩  方郧龙 《地理空间信息》2011,9(3):168-169

根据实际校准GPS接收机的经验,通过对GPS接收机的校准方法进行深入研究,结合实例,对校准过程中遇到的各种问题进行了分析探讨.  相似文献   

The ground calibration setup of OMEGA and VIRTIS experiments: description and performances     

Guillaume Bonello  Jean Pierre Bibring  Alain Soufflot  Yves Langevin  Brigitte Gondet  Michel Berthé  Charles Carabetian 《Planetary and Space Science》2005,53(7):711-728

Hyperspectral imagery is an essential technique for remote sensing of surfaces and atmospheres of planetary objects. However, given the instrumental complexity of coupling imaging and spectroscopy, in particular in the infrared, an in-depth ground calibration is mandatory to enable an unbiased and optimized data reduction.This paper presents the ground calibration setup designed and implemented for the visible and near infrared imaging spectrometers VIRTIS/ROSETTA, and OMEGA/MARS-EXPRESS, and summarizes the main results obtained in validating the required performances.  相似文献   

OMEGA/Mars Express: Visual channel performances and data reduction techniques     

G. Bellucci  F. Altieri  Y. Langevin 《Planetary and Space Science》2006,54(7):675-684

  相似文献   

THE PERFORMANCE OF LEAST SQUARES AND ROBUST REGRESSION IN THE CALIBRATION OF ANALYTICAL METHODS UNDER NON-NORMAL NOISE DISTRIBUTIONS   总被引：1，自引：0，他引：1  

R.WOLTERS  G.KATEMAN 《地理学报(英文版)》1989,(1)

By means of Monte Carlo simulations a comparison has been made between ordinary least squaresregression and robust regression. The robust regression procedure is based on the Huber estimate and iscomputed by means of the iteratively reweighted least squares algorithm. The performance of bothprocedures has been evaluated for estimation of the parameters of a calibration function and fordetermination of the concentration of unknown samples. The influence of the distributionalcharacteristics skewness and kurtosis has been studied, and the number of measurements used forconstructing the calibration curve has also been taken into account, Under certain conditions robustregression offers an advantage over least squares regression.  相似文献   

Evaluation of erosion in equipped basins: preliminary results of a comparison between the Gavrilovic model and direct measurements of sediment transport   总被引：1，自引：0，他引：1  

A. Tazioli 《Environmental Geology》2009,56(5):825-831

The study of the hydrologic characters of a water course permits the correct management of the corresponding basin and a greater control over the water resources of the whole basin; therefore, a suitable planning and maintenance of the necessary interventions along the water course, especially in proximity of the outlet to sea, becomes necessary. An evaluation of the solid transport allows an estimation of the erosion to which the basin is subjected as a result of the river flow, and further helps to prevent hydrologic disasters in the possible risk zones. Among the various experimental techniques in use for measuring the suspended-solid transport, nuclear methods have been preferably used in this research, which are based on monitoring the concentration of the suspended sediments. The suspended-solid concentration is detected by the attenuation of radioactivity emitted by a source of ²⁴¹Am dipped in the water. This attenuation, due to the presence of the sediments transported in great amounts during events of flood is measured using a scintillation detector made up of a crystal of NaI(Tl). With appropriate calibration curves built both in the laboratory and in the field, it is possible to trace the amount of suspended-solid transport in a certain river section that is located in the proximity of the river outlet. This methodology, applied to different equipped basins in Italy and Africa, is particularly useful for small and medium water courses (similar to those of the Apennine ranges in Italy), allowing an assessment of the erosion in the whole watershed. In this note, the techniques used are introduced in detail, with particular attention to the instrument calibration, and the numerical results obtained for some basins in the Marche region (Italy) are compared with some empirical formulae used in previous reports for the calculation of erosion.  相似文献   

A wind tunnel for the calibration of Mars wind sensors     

C.F. Wilson  A.L. Camilletti  P.M. Ligrani 《Planetary and Space Science》2008,56(11):1532-1541

A major limitation in the development of wind sensors for use on Mars is the lack of suitable testing and calibration facilities. A low-density wind tunnel has been developed at Oxford University for calibration of wind sensors for Mars landers, capable of providing stable or dynamically varying winds, of air or carbon dioxide, at Martian pressures (5-10 mbar) and speeds (0.5-30 m/s), and temperatures of 200-300 K. The flow field in the test section was calculated using analytical and computational modelling techniques, and validated experimentally using a pitot probe. This facility's stability and accuracy offer significant advantages with respect to previous calibration facilities.  相似文献   

On the Elimination of Bias Averaging-Errors in Proxy Records   总被引：2，自引：2，他引：0  

Veerle Beelaerts  Fjo De Ridder  Nele Schmitz  Maite Bauwens  Frank Dehairs  Johan Schoukens  Rik Pintelon 《Mathematical Geosciences》2009,41(2):129-144

Knowledge of and insight into past environmental conditions can be obtained by processing and analyzing proxies. The proxies need to be processed as precisely and accurately as possible, otherwise the conclusion of the analysis will be biased. A calibration method which reduces bias errors in the proxy measurements due to averaging is presented. Sampling with nonzero sample sizes causes an averaging of the true proxy signal over the volume of the sample. The method is applied on a linear synthetic record which results in an optimal correction for frequency components ranging from the dc-frequency (DC) to one half of the sample frequency (f _s /2). Next, the method is tested on non-linear synthetic data where the signal is reconstructed reasonably well. Finally, the method is applied to a real vessel density record of R. mucronata from Makongeni, Kenya, and to a real delta deuterium record of ice core EDC from dome C, Antarctica. The method discussed in this paper is a valuable tool for the calibration of proxy measurements; it can be applied as a correction for low resolution measurements and expanded to other types of samples and proxies. Working with small sample sizes (high resolution) amounts to working near the detection limit, where the signal-to-noise-ratio is low. This correction method provides an alternative in which low resolution measurements can be upgraded to minimize the loss of information due to larger sample sizes.  相似文献