JX—3解析测图仪上航测高倍放大成图的试验     

傅镇国 《测绘工程》1997,6(1):46-51

介绍试用１：３３０００比例尺航测资料，在ＪＸ－３解析测图仪上高倍放大航测１：１０００比例尺地形图的成图方案和应采取的技术措施，运用 解析法模型绝对定向的原理，在全野布点时采用两种方案对照比较，进行理论和试验精度的分析，并给出试验结果。  相似文献   

地震能量空间分布局域标度特性中短期预报方法及效能评价——实际震例的回顾性检验   总被引：1，自引：1，他引：1  

蒋海昆  王忠民  陶九庆  刁守中  韩加法 《地震研究》1997,(2)

利用中国大陆丰富的地震记录，对表征地震能量空间分布局域标度特性的各参量〔１〕及其组合进行系统研究，提炼具有可操作性、能够用于日常地震监测预报的实用方法，特别着重于“异常”划分方式及划分标准的研究。这一划分方式及划分标准对不同地区或不同时段均是“动态”可变的，对所研究的１０个区域内发生的中强地震进行回顾性的预报检验，发现对于较短时期（０．５－１．５年），其最大预报评分的平均值介于０．３—０．６之间，明显高于随机应答的概率评分，表明多参数综合使用具有相对强的预报能力  相似文献   

金州短水准观测和资料分析中的若干重要问题     

卢良玉  葛彦增 《东北地震研究》1997,13(2):1-6

对金州短水准观测和资料分析中常易引起争议或新出现的若干重要问题进行论论，其结果对跨断层形变测量具有普遍意义。  相似文献   

张家界地貌风光及其产业导向     

翟辅东  陈文光 《山地学报》1997,(4)

用遥感技术对张家界地貌进行了研究,分析了张家界地貌的产业导向和开发效益,提出了进一步发展的举措。  相似文献   

岩石Kaiser效应测地应力原理中的若干问题研究   总被引：3，自引：0，他引：3  

刘峥  巫虹 《上海国土资源》2004,(3):38-41,56

该文通过对几种不同类型岩石的实验研究，提出了关于在围压条件下影响岩石Kaiser效应的若干问题，分析了它们的声发射特征，为深部地应力测量提供了一种新的解决方法。  相似文献   

朝阳西北部金成矿区地球物理特征及找矿方向     

袁国平  靳晓新  蒋振和  王海富  玄力 《矿产与地质》2004,18(1):73-77

总结了朝阳西北部金成矿区的区域磁场、重力场等地球物理场的特征及规律，指出了常规物探方法在该区的找金效果，预测了金成矿的远景区段。  相似文献   

广西环江县北山地区喷流沉积铅锌矿资源潜力及找矿方向   总被引：6，自引：2，他引：6  

谢世业  陈大经  辛厚勤  刘川宁 《矿产与地质》2004,18(3):217-219

环江县北山地区铅锌矿均富集在同一地层层位——中上泥盆统，五圩—川山—驯乐NNE向深断裂控制着成矿带，矿床存在大量沉积成岩成矿组构，喷流沉积特征明显。其成矿地质背景、沉积相、礁硅岩套建造、同生断裂活动、赋矿层位等与邻区丹池锡一铅锌多金属矿集区类似，有巨大找矿潜力。  相似文献   

时空多点连续定向取心技术应用研究          下载免费PDF全文

周策  陈文俊 《探矿工程》2004,31(8):36-38

为解决以往定向仪不抗振、岩样采取率不高等问题，利用时间与钻孔空间位置对应的关系，研制成功了KD型定向仪。详细介绍了该定向仪的基本构成、技术参数及现场应用情况。  相似文献   

The initiation and development of metamorphic foliation in the Otago Schist, Part 2: evidence from quartz grain-shape data   总被引：1，自引：0，他引：1  

A. STALLARD  D. SHELLEY  S. REDDY 《Journal of Metamorphic Geology》2005,23(6):443-459

Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.  相似文献   

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction   总被引：1，自引：0，他引：1  

T.I. Ivankina  H.M. Kern  A.N. Nikitin 《Tectonophysics》2005,407(1-2):25-42

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.  相似文献