努力提高三维地震勘探精度，为西部煤炭工业做出新贡献     

孙升林 《中国煤炭地质》2008,(6):1-5

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!  相似文献   

三维地震小面元采集技术在晋城矿区的应用     

张胤彬 《中国煤炭地质》2008,(6):70-72

依托“西部煤炭资源高精度三维地震勘探技术”工程,对晋城矿区进行了旨在提高小断层,小陷落柱探测能力的高密度三维地震勘探。根据面元选择因素及该区地质任务,采用5m×5m网格进行野外数据采集;考虑炮检距、方位角、覆盖次数、排列片横纵比及煤层埋深（350～500m）等因素,采用中点放炮、60道接收,24次覆盖（横向4次,纵向6次）的8线16炮束状观测系统,基岩中激发。原始资料经同一处理流程后,获得5m×5m×1ms、5m×10m×1ms、10m×10m×1ms及2.5m×2.5m×1ms不同单元的三维数据体多个,通过对比可以发现小断层,小陷落柱在其小面元叠加时间剖面、顺层切片及相干切片都有清晰的反映。实例说明,小面元采集技术可以提高对小构造的纵、横向分辨能力,满足山区对三维地震精确勘探的要求。  相似文献   

Sedimentary Features of Shallow Ancient River Channels on the Northern Shelf of the South China Sea   总被引：1，自引：0，他引：1  

Kou Yangqi  Du Deli nd Marine Geological Investigation Party  MGMR  Guangzhou  Guangdong Jiang M inxi 《《地质学报》英文版》1995,69(1)

Quaternary buried ancient river channels are widespread in the shallow-level sediments of the northern shelf of the South China Sea. The sedimentary sequence mainly of fluvial deposits comprise an important component part of the low-stand system tract and transgressive system tract in the study region. The plannar variation and spatial association of the sedimentary features such as incised valley fillings, deltaic foreset wedges and block slides of shelf-marginal fans reflect the palaeogeographic environment during the fall of the regional sea level in the northern part of the South China Sea. Based on the high-resolution seismic reflection data and gelogical data from boreholes, the present paper makes an integrated interpretation of the Quaternary ancient river channels in the shallow sediments of the study area, studies the sedimentary features of the ancient channels such as their spatial distribution, seismic facies reflection indicators, sedimentary facies and sand -body types, and discusses thei  相似文献   

深层地震勘探激发井深探讨     

HUANG Ling YANG Guang-da HAN Li-guo .Geophysical Exploration Company of Jilin Petroleum Group Co.  Ltd  Songyuan  China .Jilin Petroleum Group Company  Songyuan    China .College of GeoExploration Science  Technology  Jilin University  Changchun  China 《吉林大学学报(地球科学版)》2006,(Z2)

深层地震勘探野外资料采集的关键是在保证原始资料一定信噪比的基础上,同时兼顾分辨率,激发井深是决定资料品质的重要因素之一。通过对虚反射滤波作用分析,提出了充分利用虚反射能量设计最佳激发井深,增强下传地震波能量的采集方法。理论分析和试验资料表明,在高速层下4～7m的最佳激发岩性深度是深层勘探的理想井深。  相似文献   

济阳坳陷古潜山地震采集技术研究     

徐国盛  冯刚  谭绍泉  李显贵  何建军  康家光 《物探化探计算技术》2005,27(3):199-204

济阳坳陷碳酸盐岩古潜山以前地震资料存在信噪比低、速度陷阱、分辨率低、施工过程中缺炮、空道、内幕反射品质差或无反射等问题。造成上述问题除了野外施工工艺、室内处理流程和参数的影响外,在采集参数方面主要影响因素有覆盖次数低、炮检距与方位角不均匀、面元太大等。针对济阳坳陷古潜山三维地震资料采集应以目标设计为指导思想,以基于模型分析的三维采集参数论证为主线,最终优化各种采集参数。建立了拱张褶皱型、断裂块断型和风化残丘型三个具有代表性的古潜山地质理论模型。使用先进的“绿山”地震采集观测系统设计软件,采用“块”来描述任意复杂地质模型结构,分别设计出各自的地震采集观测系统。以林樊家潜山为例,采用12线18炮束状新观测系统模拟单炮发射接收,对各主要目的层能追踪的地层信息比原始6线9炮束状观测系统采集的地震信息丰富,能准确反映地下构造形态与地质体的物理属性。  相似文献   

西部煤炭采区三维地震勘探技术与效果   总被引：1，自引：0，他引：1  

吴有信 《物探与化探》2005,29(5):404-408

阐述了西部地区煤炭三维地震勘探地质和地球物理特征, 对三维地震勘探的观测系统设计、地震波的激发与接收条件选择、施工技术措施等进行了讨论, 通过几个地区的地震勘探数据采集实践, 说明在西部地区复杂的地形地质和地震地质条件下, 煤炭三维地震勘探同样可取得较好的地质效果。  相似文献   

HD-4002型综合测井仪     

陆士立  袁明  焦仓文  马艳芳  谢海宁  赵志明  李继红  于延斌 《铀矿地质》2005,21(3):183-192

HD 4002型综合测井仪是核工业北京地质研究院于1998年开始研制的, 其目标是为铀矿地质系统提供适合砂岩型铀矿勘查的轻便型数字测井仪, 满足测井生产的需要。该仪器于2001 年3月通过部级鉴定, 2002至2003年投入海拉尔盆地铀矿勘查测井试生产。本文介绍了仪器的用途、功能及特点、性能指标, 简要说明了各部分的工作原理。  相似文献   

复式河槽正常水深计算方法比较          下载免费PDF全文

杨克君  曹叔尤  刘兴年 《水科学进展》2005,16(2):189-195

明渠恒定均匀流正常水深在水力计算中十分重要。而对于复式河槽,当洪水漫滩后,直接运用曼宁方程推求正常水深,将带来很大误差。系统地总结了计算正常水深的各种方法,用二分法求解,并运用英国科学工程研究协会洪水水槽设施(SERC-FCF)的大量系列水槽实验成果加以比较。比较发现,精度由高到低依次为COHM方法、刘沛清法、断面倾斜分割法、动量传递法、谢汉祥法、断面叠加法。通过对各种方法详细分析,建议在计算天然复式河槽正常水深时,COHM方法是值得推广的一种好方法。  相似文献   

四阶△－∑过抽样电路原理及其在微弱地学信号检测中的应用   总被引：4，自引：0，他引：4  

邓明邓靖武  魏文博金胜谭捍东  罗贤虎 《地学前缘》2002,9(4):417-421

传统的测量电路无法解决诸如海底大地电磁场这样微弱地学信号的检测问题。近几年诞生了一种称之为△-∑的电路理论以及相应的硬件芯片，给微伏级的弱信号检测开辟一条新的技术路径。文章介绍与地学探测有关的一种△-∑电路类型，该类型以低频段微弱信号为检测对象。采用系统理论和电路分析方法对△-∑原理作了较深入的讨论，阐明这种电路技术对提高微弱信号观测的分辨率是有效的。结合海底大地电磁探测中的信号采集问题，介绍了在仪器中把多路的被测模拟量变为数字量的技术过程。经对实际采集的海底信息的频谱曲线进行分析，证实所采用的△-∑技术以及多路信号采集的电路方案是合理的。  相似文献   

Anatomy of shelf deltas at the edge of a prograding Eocene shelf margin, Spitsbergen   总被引：1，自引：0，他引：1  

Donatella Mellere  Piret Plink-Björklund†  Ronald Steel† 《Sedimentology》2002,49(6):1181-1206

Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.  相似文献