The topographic data source of digital terrain models as a key element in the accuracy of hydraulic flood modelling     

A. Casas  G. Benito  V.R. Thorndycraft  M. Rico 《地球表面变化过程与地形》2006,31(4):444-456

The effects of the topographic data source and resolution on the hydraulic modelling of floods were analysed. Seven digital terrain models (DTMs) were generated from three different altimetric sources: a global positioning system (GPS) survey and bathymetry; high‐resolution laser altimetry data LiDAR (light detection and ranging); and vectorial cartography (1:5000). Hydraulic results were obtained, using the HEC‐RAS one‐dimensional model, for all seven DTMs. The importance of the DTM's accuracy on the hydraulic modelling results was analysed within three different hydraulic contexts: (1) the discharge and water surface elevation results from the hydraulic model; (2) the delineation of the flooded area; and (3) the relative sensitivity of the hydraulic model to changes in the Manning's n roughness coefficient. The contour‐based DTM was the least accurate with a root mean square error (RMSE) of 4·5 m in the determination of the water level and a variation of up to 50 per cent in the estimation of the inundated area of the floodplain. The GPS‐based DTM produced more realistic water surface elevation results and variations of up to 8 per cent in terms of the flooded area. The laser‐based model's RMSE for water level was 0·3 m, with the flooded area varying by less than 1 per cent. The LiDAR data also showed the greatest sensitivity to changes in the Manning's roughness coefficient. An analysis of the effect of mesh resolution indicated an influence on the delineation of the flooded area with variations of up to 7·3 per cent. In addition to determining the accuracy of the hydraulic modelling results produced from each DTM, an analysis of the time–cost ratio of each topographic data source illustrates that airborne laser scanning is a cost‐effective means of developing a DTM of sufficient accuracy, especially over large areas. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

A bathymetric overview of the Mariana forearc   总被引：1，自引：0，他引：1  

ROBERTJ.  STERN & N. CHRISTIAN  SMOOT 《Island Arc》1998,7(3):525-540

Bathymetric data at a 200-m contour interval for the entire Mariana forearc, from south of 13°N to 25°N, permits the first comprehensive overview of this feature. The Mariana forearc represents a sediment-starved end-member. The forearc in its southern and central sections is divisible into a structurally complex eastern province and a less-deformed western province. Despite the absence of an accretionary complex the Mariana forearc has a well-defined outer-arc high; this probably results from a greater concentration of low-density serpentinized mantle lithosphere beneath the outer forearc relative to the inner forearc. This serpentinization gradient is coupled with differing deformational styles of thinner and more brittle lithosphere beneath the outer forearc compared to thicker and more ductile lithosphere beneath the inner forearc. The bathymetric data also support models calling for extension along-strike of the forearc, reflecting an increase in arc length accompanying the crescent-shaped opening of the Mariana Trough back-arc basin. Both northeast and northwest ridges and grabens can be identified, with the latter restricted to the southern part of the forearc and the former widely distributed in the central and northern forearc. Northeast-oriented extensional structures are supplanted northward by long, linear northwest-trending structures that are interpreted as left-lateral strike–slip faults. These variations in deformation along-strike of the forearc manifest a transition from nearly orthogonal convergence in the south to highly oblique convergence in the north.  相似文献   

Enregistrement de la dernière remontée du niveau marin dans l'architecture interne d'une vallée incisée : le pertuis Breton (Charente-Maritime)     

Nicolas Weber  Éric Chaumillon  Michel Tesson 《Comptes Rendus Geoscience》2004,336(14):1273-1282

Recent very high-resolution seismic profiles ground-truthed by vibrocores allow us to evidence an atypical incised valley fill in a drowned valley segment, the ‘Pertuis Breton’ (Bay of Biscay, France). The sedimentary valley-fill architecture mainly includes five superimposed progradational wedges composed by marine sands. Sandbodies show a landward migration of their depocentres upward and are topped by almost flat unconformities extended by submarine terraces. This sedimentary infill pattern is similar to backstepping wedges, described on continental shelfs. It suggests that this valley fill records sea-level rise during the last transgression. To cite this article: N. Weber et al., C. R. Geoscience 336 (2004).  相似文献   

A New Method for C ^k -Surface Approximation from a Set of Curves, with Application to Ship Track Data in the Marianas Trench     

Dominique Apprato  Christian Gout  Dimitri Komatitsch 《Mathematical Geology》2002,34(7):831-843

We introduce a surface approximation technique to address the problem of fitting a surface to a given set of curves. The originality of the method lies in its ability to take into account the continuous aspect of the data, and also in the possibility to arbitrarily select the regularity (C⁰, C¹, or higher) of the approximant obtained. We demonstrate the efficiency of the approach by constructing a bathymetry map of the Marianas trench based upon a set of SONAR (SOnic Navigation And Ranging) bathymetry ship track data.  相似文献   

Évolution temporelle et architecture interne d'un banc sableux estuarien : la Longe de Boyard (littoral atlantique,France)     

Éric Chaumillon  Hervé Gillet  Nicolas Weber  Michel Tesson 《Comptes Rendus Geoscience》2002,334(2):119-126

The evolution and the internal architecture of an estuary type sand ridge has been studied with a set of bathymetric data recorded during the last two centuries and with a dense grid of recent very high resolution seismic profiles. Bathymetric data of the so-called, Longe de Boyard sand ridge, displays sand losts due to wave and tide erosion. Internal geometry, through seismic profile analysis, indicates two main phases of deposition recording both, a recent high energy environment and an older low energy one, respectively. Such an evolution is believed to record changes in sedimentation processes mainly related to the end of the Holocene transgression (8 000–5 000 yr BP). To cite this article: É. Chaumillon et al., C. R. Geoscience 334 (2002) 119–126.  相似文献   

海洋测深波束角效应改正的海底倾斜角求解差分算法     

肖付民  刘经南  刘雁春  朱小辰 《武汉大学学报(信息科学版)》2007,32(3):238-241

在海底地形测量中，由于波束角效应导致探测的海底地形存在失真。为提高海底地形的测量精度，应消除或减弱波束角效应影响。而对未知海底的倾斜角求解问题是解决波束角效应的难点之一。为此，针对单波束测量提出了一种实用的海底倾斜角差分算法。实例计算表明，差分算法更为有效、合理，适合于计算机处理。  相似文献   

Evolution of a Holocene delta driven by episodic sediment delivery and coseismic deformation, Puget Sound, Washington, USA     

WALTER A. BARNHARDT  BRIAN L. SHERROD† 《Sedimentology》2006,53(6):1211-1228

Episodic, large‐volume pulses of volcaniclastic sediment and coseismic subsidence of the coast have influenced the development of a late Holocene delta at southern Puget Sound. Multibeam bathymetry, ground‐penetrating radar (GPR) and vibracores were used to investigate the morphologic and stratigraphic evolution of the Nisqually River delta. Two fluvial–deltaic facies are recognized on the basis of GPR data and sedimentary characteristics in cores, which suggest partial emplacement from sediment‐rich floods that originated on Mount Rainier. Facies S consists of stacked, sheet‐like deposits of andesitic sand up to 4 m thick that are continuous across the entire width of the delta. Flat‐lying, highly reflective surfaces separate the sand sheets and comprise important facies boundaries. Beds of massive, pumice‐ and charcoal‐rich sand overlie one of the buried surfaces. Organic‐rich material from that surface, beneath the massive sand, yielded a radiocarbon age that is time‐correlative with a series of known eruptive events that generated lahars in the upper Nisqually River valley. Facies CF consists of linear sandbodies or palaeochannels incised into facies S on the lower delta plain. Radiocarbon ages of wood fragments in the sandy channel‐fill deposits also correlate in time to lahar deposits in upstream areas. Intrusive, sand‐filled dikes and sills indicate liquefaction caused by post‐depositional ground shaking related to earthquakes. Continued progradation of the delta into Puget Sound is currently balanced by tidal‐current reworking, which redistributes sediment into large fields of ebb‐ and flood‐oriented bedforms.  相似文献   

SHALLOW SEAWATER DEPTH RETRIEVAL BASED ON BOTTOM CLASSIFICATION FROM REMOTE SENSING IMAGERY     

PANGLei ZHANGMing-bo ZHANGJi-xian ZHENGZhao-qing LINZong-jian 《中国地理科学(英文版)》2004,14(3):258-262

Remote sensing technique, replacing conventional sonar bathymetry technique, has become an effective complementary method of mapping submarine terrain where special conditions make the sonar technique difficult to be carried out. At the same time, as one kind of data set, multispectral remote sensing data has the disadvantage of being influenced by the variable bottom types in shallow seawater, when it is applied in bathymetry. This paper puts forward a new method to extract water depth information fi‘om multispectral data, considering the bottom classification and the true water depth accuracy. That is the Principal Component Analysis (PCA) technique based on the bottom classification. By the least square regression with significance, the experiment near Qingdao City has obtained more satisfactory bathymetry accuracy than that of the traditional single-band method, with the mean absolute error about 2.57m.  相似文献   

Simulation of Stratigraphic Architecture from Statistical and Geometrical Characterizations     

John A. Goff 《Mathematical Geology》2000,32(7):765-786

Stratigraphic modeling based on physical and geologic principles has been improved by more sophisticated process models and increased computer power. However, such efforts may reach a limit in their predictive power because of the stochastic, multiscaled nature of the physical processes involved. Building on techniques from the geostatistical literature, a conditional simulation method, dubbed SimStrat, has been developed to improve predictions of stratigraphic architecture from limited data. No physical processes are invoked. Rather, the prediction is based solely on geometric and statistical principals. The method takes as input sonar bathymetry, seismically defined stratigraphic horizons, and core-defined horizons. Each stratigraphic horizon is characterized using spectral modeling and coherence modeling for adjacent horizons. Predictions of subsurface horizons are improved where seafloor bathymetry conforms with the underlying strata. Conditional simulations can then be generated that conform to available data constraints and statistical characterization. Tests with synthetic data in one and two dimensions for differing spectral models confirm the reliability of the method.  相似文献   

滨浅海单波束测深潮汐改正的方法   总被引：2，自引：0，他引：2  

周良勇  丛鸿文 《海洋地质前沿》2005,21(3):36-39

单波束测深仪在现在的海上地质调查中被广泛应用,潮汐校正是必不可少的内容。我们给出一种利用潮汐预报值进行潮汐改正的方法和过程,并介绍该方法在黄河三角洲环境地质补充调查项目中的应用。  相似文献