干涉图像第二类统计Goldstein自适应滤波方法   总被引：1，自引：1，他引：0  

赵文胜  蒋弥  何秀凤 《测绘学报》2016,45(10):1200-1209

干涉图滤波是InSAR数据处理中的关键步骤之一,滤波结果的优劣会直接影响到相位观测的质量和最终产品精度。本文结合干涉图滤波算法的研究进展,对Goldstein频率域滤波及其经典改进算法进行了系统分析和比较,在此基础上提出了一种基于第二类统计的稳健相干性估计量的Goldstein自适应滤波方法。本文采用模拟数据和Envisat ASAR真实数据与现有方法进行了验证,试验结果表明,新的滤波方法在保持细节和抑制噪声方面优势更加明显。  相似文献   

地表形变监测的改进相干目标法   总被引：1，自引：1，他引：0  

王明洲  李陶  江利明  徐侃  吴文豪 《测绘学报》2016,45(1):36-43

如何从雷达干涉时间序列影像中获取更全面的相干目标集合,进行变形时间序列分析是当前研究的难点和热点。本文提出了改进的相干目标法,可获取更为全面且可信度高的相干目标集合,进而提高地表形变监测的时空分辨率和精度。根据雷达影像中同类型地物散射分布相近的特点,采用非参数同分布检验算法提取后向散射特性相近的同质点开展空间非局部滤波,提高干涉图的质量。与此同时,利用多尺度的极大似然条纹频率估计算法分离差分干涉图中的系统性相位,并基于同质点进行自适应相干性估计,获取相干性的平稳估计量,从而获取更多的相干点目标。利用20景TerraSAR-X条带模式时间序列影像,分别利用传统的及改进后的相干目标法对香港填海区域地表形变信息进行时序分析。对试验数据的分析结果表明,本文提出的改进方法在具有稀疏植被的填海区可有效增加相干目标点的提取,得到更为可信的沉降结果。  相似文献   

岬湾海滩剖面中长期变化特征及其控制因素——以青岛石老人海滩为例   总被引：1，自引：1，他引：0  

冯哲  王永红  易李达玲 《海洋科学》2016,40(7):100-109

了解海滩剖面变化可以更好地理解海滩动态过程。利用2007年5月~2014年12月近8 a青岛石老人海滩剖面的实测资料,计算剖面各段单宽体积变化量及后滨宽度,结合交叉小波和小波相干分析方法,探讨海滩剖面中长期淤蚀变化特征及其控制因素。结果表明,近8 a来海滩剖面表现为侵蚀状态,不同岸段侵蚀程度不同。剖面1岸段侵蚀明显,剖面2和剖面3岸段轻微侵蚀。剖面的变化过程可划分为平稳期、剧变期和微调期3个时期。各时期剖面的季节性变化较复杂,平稳期具冬蚀夏淤的交替变化特征,整体淤蚀量较小;剧变期剖面呈阶段性蚀退,变化幅度相对较大,微调期剖面可能仍处于剧变期的恢复阶段,季节性变化不明显。剧变期和微调期的小波交叉谱和相干谱分析显示,波浪和前滨单宽体积相干性较好,尤其当大于2 m的波高达到10%以上,海滩地形可以和波高变化产生同周期的变化。因此波高变化基本控制了剖面的季节变化。而海滩长周期变化主要受控于风暴潮作用及其漫长的恢复期,沿岸输沙和海平面变化则一定程度上导致了剖面长期侵蚀格局的形成。  相似文献   

A new assessment model for evacuation vulnerability in urban areas     

Xiaoyi Ma  Ci Song  Chenghu Zhou 《International journal of geographical information science》2016,30(12):2401-2420

In the high-speed urbanization process of China, the urban population has been increasing significantly, leading to a high-density aggregation of population. However, the sharp increase in population density has not produced commensurate improvements in the road networks. On the contrary, the population increase induced a serious evacuation vulnerability, which cities experience during various hazards and catastrophic events. Therefore, research on evacuation vulnerability is important to urban planning. To assess the evacuation vulnerability, the optimal and worst scenarios should be considered because all possible evacuation plans occur between these extremes. However, most previous evacuation vulnerability studies are based on the worst-case scenario, only providing an upper bound of a potential evacuation assessment. To provide a more comprehensive theoretical basis for decision-makers to understand the consequences caused by all possible evacuations, this paper proposes an optimal evacuation vulnerability assessment model that provides the lower bound on potential evacuation difficulties. The model is solved by a stepwise spreading algorithm based on Graph Theory. Subsequently, to evaluate the effectiveness of the model, the study adopts the model to assess the evacuation capability of different road network topologies. A comparison with previous research was performed. The model was demonstrated in an application to the South Luogu Alley of Beijing, China. The significance of this paper is that the combination of our model with previous research may provide a more complete theoretical basis for an evacuation vulnerability assessment.  相似文献   

Ablation Characteristic of Ilmenite using UV Nanosecond and Femtosecond Lasers: Implications for Non‐Matrix‐Matched Quantification          下载免费PDF全文

Zhen Li  Zhaochu Hu  Detlef Günther  Keqing Zong  Yongsheng Liu  Tao Luo  Wen Zhang  Shan Gao  Shenghong Hu 《Geostandards and Geoanalytical Research》2016,40(4):477-491

Ilmenite (FeTiO₃) is a common accessory mineral and has been used as a powerful petrogenetic indicator in many geological settings. Elemental fractionation and matrix effects in ilmenite (CRN63E‐K) and silicate glass (NIST SRM 610) were investigated using 193 nm ArF excimer nanosecond (ns) laser and 257 nm femtosecond (fs) laser ablation systems coupled to an inductively coupled plasma‐mass spectrometer. The concentration‐normalised ⁵⁷Fe and ⁴⁹Ti responses in ilmenite were higher than those in NIST SRM 610 by a factor of 1.8 using fs‐LA. Compared with the 193 nm excimer laser, smaller elemental fractionation was observed using the 257 nm fs laser. When using 193 nm excimer laser ablation, the selected range of the laser energy density had a significant effect on the elemental fractionation in ilmenite. Scanning electron microscopy images of ablation craters and the morphologies of the deposited aerosol materials showed more melting effects and an enlarged particle deposition area around the ablation site of the ns‐LA‐generated crater when compared with those using fs‐LA. The ejected material around the ns crater predominantly consisted of large droplets of resolidified molten material; however, the ejected material around the fs crater consisted of agglomerates of fine particles with ‘rough' shapes. These observations are a result of the different ablation mechanisms for ns‐ and fs‐LAs. Non‐matrix‐matched calibration was applied for the analysis of ilmenite samples using NIST SRM 610 as a reference material for both 193 nm excimer LA‐ICP‐MS and fs‐LA‐ICP‐MS. Similar analytical results for most elements in ilmenite samples were obtained using both 193 nm excimer LA‐ICP‐MS at a high laser energy density of 12.7 J cm^?2 and fs‐LA‐ICP‐MS.  相似文献   

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise          下载免费PDF全文

Phillip E. Warwick  Ian W. Croudace  Richard M. Marsh  Nicolas Baglan  Sang Bog Kim 《Geostandards and Geoanalytical Research》2018,42(2):253-262

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.  相似文献   

微波等离子体原子发射光谱法测定偏远矿区海泡石中的主微量元素     

周学忠  谢华林 《岩矿测试》2021,(5):680-687

海泡石是具有层状结构的含水富镁硅酸盐黏土矿物,其中无机元素含量是揭示其成矿物质来源、成矿流体性质和矿床成因的重要依据,通常采用电感耦合等离子体发射光谱/质谱法(ICP-OES/MS)进行测定,等离子体(ICP)的高温激发会产生成大量谱线干扰,维持ICP稳定工作需使用高纯氩气,持续供气对于偏远矿区海泡石的检测还将面对气体采购和运输不便的问题。本文基于微波等离子体原子发射光谱(MP-AES)的低温激发技术减少光谱干扰,建立了准确测定偏远矿区海泡石中主量元素Mg、Al、Ca、Fe、K、Na和微量元素Cu、Zn、Mn、Pb含量的分析方法。利用硝酸-盐酸-氢氟酸混合酸对海泡石进行微波消解,避免了样品处理过程中分析元素的损失,加快了样品处理速度,同时提高了样品溶液的稳定性。通过选择各元素光谱线的分析波长,并利用快速线性干扰校正(FLIC)技术校正光谱干扰,以Lu为内标元素校正基体效应,提高了灵敏度和准确度。各元素的检出限为0.19～14.6μg/L。海泡石国家标准物质(GBW07138)各元素测定值与认定值的相对误差在-5.0%～6.7%之间。本方法具有检出限低、线性范围宽、结果准确等优点;MP-AES采用自带的氮气发生器为等离子体提供氮气作为工作气,无需引入复杂气体,提高了分析效率,尤其适用于气体采购和运输不便的偏远矿区。  相似文献   

白涧铁矿南区复杂地层钻探施工技术          下载免费PDF全文

李红梅  石逊 《探矿工程》2021,48(11):30-35

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。  相似文献   

Inter‐laboratory Characterisation of Apatite Reference Materials for Chlorine Isotope Analysis     

Alicja Wudarska  Ewa S&#x;aby  Michael Wiedenbeck  Jaime D. Barnes  Magali Bonifacie  Neil C. Sturchio  Grard Bardoux  Frdric Couffignal  Johannes Glodny  Linnea Heraty  Timm John  Christof Kusebauch  Sathish Mayanna  Franziska D. H. Wilke  Ewa Deput 《Geostandards and Geoanalytical Research》2021,45(1):121-142

Here we report on a set of six apatite reference materials (chlorapatites MGMH#133648, TUBAF#38 and fluorapatites MGMH#128441A, TUBAF#37, 40, 50) which we have characterised for their chlorine isotope ratios; these RMs span a range of Cl mass fractions within the apatite Ca₁₀(PO₄)₆(F,Cl,OH)₂ solid solution series. Numerous apatite specimens, obtained from mineralogical collections, were initially screened for ³⁷Cl/³⁵Cl homogeneity using SIMS followed by δ³⁷Cl characterisation by gas source mass spectrometry using both dual‐inlet and continuous‐flow modes. We also report major and key trace element compositions as determined by EPMA. The repeatability of our SIMS results was better than ± 0.10‰ (1s) for the five samples with > 0.5 % m/m Cl and ± 0.19‰ (1s) for the low Cl abundance material (0.27% m/m). We also observed a small, but significant crystal orientation effect of 0.38‰ between the mean ³⁷Cl/³⁵Cl ratios measured on three oriented apatite fragments. Furthermore, the results of GS‐IRMS analyses show small but systematic offset of δ³⁷Cl_SMOC values between the three laboratories. Nonetheless, all studied samples have comparable chlorine isotope compositions, with mean 10³δ³⁷Cl_SMOC values between +0.09 and +0.42 and in all cases with 1s ≤ ± 0.25.  相似文献   

基于相干特征的岩石薄片序列图像边缘提取及颗粒分割     

周恒  张春雷  张欣  陈庆轩  张艳  仲诚诚 《吉林大学学报(地球科学版)》2021,51(6):1897-1907

针对岩石颗粒边缘模糊、结构复杂的特点,为了更有效地识别颗粒边缘,在基于特征值的C3相干算法的基础上,融合多尺度和多角度的特征表达,提出了一种改进的C3相干算法。该算法综合考虑岩石薄片图像角度域光学特征、空间尺度信息和各向异性信息,能更有效地表征颗粒边缘特征,表现出对复杂矿物结构的适应能力。在采集的岩石薄片正交偏光图像上验证提出的算法,实验结果表明,与原生C3相干算法相比,改进后的C3相干算法在全局图像上的方差和灰度差分乘积分别提升了68.41%和22.91%,信息熵下降了21.61%。  相似文献