格尔木地磁台观测环境测试与分析   总被引：2，自引：0，他引：2  

哈辉  邱鹏程  辛长江  谢庆和  李淑玲  李富春 《地震地磁观测与研究》2003,24(5):76-81

通过实验测试和计算，分析了高压输出电线等干扰源对格尔木地磁台观测环境的影响，进一步对格尔木地磁台观测环境现状，及今后观测环境保护工作的要点进行了综合分析讨论。  相似文献   

德令哈地震台震级偏差及台站校正值的研究     

郭葆庆  沈得秀 《高原地震》2003,15(1):36-39

利用德令哈地震台DD—l记录到的746个近震，对其测定的震级偏差进行统计计算，发现DD—l测定的震级偏小。经过分析，指出了产生偏差的原因，并给出了校正值C= 0．15。  相似文献   

变参考慢度Born近似傅氏偏移   总被引：1，自引：0，他引：1  

杜正聪  贺振华  王志  黄德济 《吉林大学学报(地球科学版)》2003,33(4):555-558

针对常规Born近似傅氏偏移方法对于剧烈横向变速介质不能精确成像的状况而提出了变参考慢度Born近似傅氏偏移，理论上解决了任意速度变化地质模型的偏移成像问题。此外，为进一步提高复杂地层的成像精度和波场延拓算子的稳定性，对散射波场的计算公式作了改进。将改进的方法运用于盐丘模型的正演和偏移试验，并与常规Born近似偏移方法相比较，可明显看出变参考慢度Born近似傅氏偏移方法在效果上要优于后者，其处理速度横向变化的能力大大增强。  相似文献   

全站仪轴系补偿原理及检验方法探讨   总被引：1，自引：0，他引：1  

叶晓明  凌模  谢方 《测绘信息与工程》2003,28(3):40-43

全面阐述了全站仪的轴系补偿相关理论和实践，指出了我国检验规程的不足之处，提出了改进方法。  相似文献   

现代城市数字测图方法浅析     

张文胜 《四川测绘》2003,26(4):155-157

本文分析比较了目前城市大比例尺数字化测图中主要方法的优缺点，并为实现数字化地形图中不连续线、面状符号及复杂线状符号向GIS的自动化导入，针对电子平板法提出了基础线的概念。对全站仪草图法，提出在全站仪上加挂微型计算机，并用常规摄像方法代替草图。  相似文献   

基于GPS基准站网的GPS测量   总被引：5，自引：0，他引：5  

胡丛玮  刘大杰 《现代测绘》2003,26(1):10-13

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题  相似文献   

Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses   总被引：9，自引：0，他引：9  

Stephen M. Eggins 《Geostandards and Geoanalytical Research》2003,27(2):147-162

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.  相似文献   

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1     

William J. Chazey III  Clive R. Neal  Jinesh C. Jain  William S. Kinman 《Geostandards and Geoanalytical Research》2003,27(2):181-192

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).  相似文献   

宜兴抽水蓄能电站试验洞的反分析研究   总被引：4，自引：2，他引：4  

杨林德  仇圣华  王悦照  丁文其  朱合华 《岩土力学》2003,(Z2)

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。  相似文献   

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast   总被引：4，自引：0，他引：4  

H. A. Abd-Elmotaal  N. Kühtreiber 《Journal of Geodesy》2003,77(1-2):77-85

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal  相似文献