Implications of structural inheritance in oblique rift zones for basin compartmentalization: Nkhata Basin,Malawi Rift (EARS)     

《Marine and Petroleum Geology》2016

The Cenozoic East African Rift System (EARS) is an exceptional example of active continental extension, providing opportunities for furthering our understanding of hydrocarbon plays within rifts. It is divided into structurally distinct western and eastern branches. The western branch comprises deep rift basins separated by transfer zones, commonly localised onto pre-existing structures, offering good regional scale hydrocarbon traps. At a basin-scale, local discrete inherited structures might also play an important role on fault localisation and hydrocarbon distribution. Here, we consider the evolution of the Central basin of the Malawi Rift, in particular the influence of pre-existing structural fabrics.Integrating basin-scale multichannel 2D, and high resolution seismic datasets we constrain the border, Mlowe-Nkhata, fault system (MNF) to the west of the basin and smaller Mbamba fault (MF) to the east and document their evolution. Intra basin structures define a series of horsts, which initiated as convergent transfers, along the basin axis. The horsts are offset along a NE–SW striking transfer fault parallel to and along strike of the onshore Karoo (Permo-Triassic) Ruhuhu graben. Discrete pre-existing structures probably determined its location and, oriented obliquely to the extension orientation it accommodated predominantly strike-slip deformation, with more slowly accrued dip-slip.To the north of this transfer fault, the overall basin architecture is asymmetric, thickening to the west throughout; while to the south, an initially symmetric graben architecture became increasingly asymmetric in sediment distribution as strain localised onto the western MNF. The presence of the axial horst increasingly focussed sediment supply to the west. As the transfer fault increased its displacement, so this axial supply was interrupted, effectively starving the south-east while ponding sediments between the western horst margin and the transfer fault. This asymmetric bathymetry and partitioned sedimentation continues to the present-day, overprinting the early basin symmetry and configuration. Sediments deposited earlier become increasingly dissected and fault juxtapositions changed at a small (10–100 m) scale. The observed influence of basin-scale transfer faults on sediment dispersal and fault compartmentalization due to pre-existing structures oblique to the extension orientation is relevant to analogous exploration settings.  相似文献   

Marine science and technology transfer: Can the Intergovernmental Oceanographic Commission advance governance of biodiversity beyond national jurisdiction?     

《Marine Policy》2016

Marine scientific research is crucial to forge solutions in the development of a new international legally binding instrument for the conservation and sustainable use of marine biological diversity in areas beyond national jurisdiction (ABNJ) under the 1982 United Nations Convention on the Law of the Sea . The transfer of marine technology, capacity development and marine genetic resources are key issues. This paper examines how the Intergovernmental Oceanographic Commission (IOC), as a competent international organisation for marine scientific research and technology transfer, can inform the development of the instrument. Synergies between marine technology transfer and non-monetary benefit sharing of genetic resources are illustrated. Four key lessons from the IOC are examined: 1. Coordinating international cooperation in marine scientific research; 2. Enabling open access to data and knowledge; 3. Facilitating capacity development through scientific training and education; and 4. Governance of marine scientific research. Realising the potential of the IOC to advance governance solutions for ABNJ will depend on increased political will from Member States and strengthened partnerships to reduce resource constraints and enhance the IOC's capacity at global and regional scales.  相似文献   

基于船位监控系统的拖网捕捞努力量提取方法研究   总被引：6，自引：1，他引：5  

张胜茂  张衡  唐峰华  樊伟  黄华文 《海洋科学》2016,40(3):146-153

为了基于船位监控系统提取拖网捕捞努力量,通过统计航速获得3个峰值,拖网作业在第2个峰值,即1~2.1 m/s,拖网作业航向差一般在–50°~50°。利用航速、航向差阈值设定,把拖网船状态划分为慢速、作业、航行,然后提取出捕捞作业状态点,1 423艘拖网船共提取到处于捕捞状态的点318 433个,合计拖网捕捞时间15 921 h,利用反距离加权插值法生成捕捞强度分布变化趋势图。捕捞努力量在渔业资源研究中是重要的参考值之一,与传统的捕捞努力量计算方法相比,该方法具有实时、大范围、快速、分辨率高的特点,能够用于辅助渔业资源保护。  相似文献   

反渗透海水淡化技术现状和展望     

高从堦  周勇  刘立芬 《海洋技术学报》2016,(1):1-14

反渗透膜技术于20世纪60年代取得突破性进展,促使反渗透海水淡化在近50年间高速发展,淡化产能自20世纪90年代起激增.海水反渗透(SWRO)淡化已成为目前投资最省、成本最低的利用海水制备饮用水的过程.文中主要对海水反渗透淡化的发展状况进行了介绍,如膜和组件的改进,关键设备高压泵和能量回收装置效率的提高,多种工艺过程的不断发展,包括预处理和后处理的新工艺,以及对环境的影响和相应对策等.反渗透技术的发展也推动了其他膜分离技术的进步,并扩展其应用领域.预计在不久的将来,膜技术在海水淡化和水再利用、扩大和保护水资源、循环经济、清洁生产、改造传统产业、节能减排及提高人民生活水平等方面发挥的作用会越来越显著.  相似文献   

半潜平台浮子式系泊系统参数优化研究     

吴澜  匡晓峰  范亚丽  王飞  李新鑫 《海洋工程》2016,34(4):30-37

通过在系泊缆中设置浮子可以改善系泊系统性能,降低平台运动响应。建立浮子式系泊系统的数值计算模型,验证浮子式系泊系统数值计算方法,详细分析浮子设计参数(设置位置和净浮力大小)变化对系泊缆张力特性与平台运动的影响规律,并根据得到的规律选择了优化的浮子系泊系统方案。最后对优化方案进行评估,表明优化方案可以显著降低系泊中的平台水平运动,尤其是低频运动,同时系泊缆张力变化不大,仍满足安全要求。研究结果可为今后浮子式系泊系统设计提供参考。  相似文献   

垂荡式波浪能装置运动模型数值分析     

丁松  韩端锋 《海洋工程》2016,34(4):107-117

垂荡式波浪能装置在海洋可再生能源开发中被广泛应用,通过浮子与摇杆在垂荡方向的相对运动吸收波浪能。在以往相关的运动预报数值分析中,通常基于微幅波假设,仅考虑浮子与摇杆在垂荡方向的运动,忽略摇杆其他自由度运动。建立并求解了垂荡式波浪能装置的非线性联合运动方程组,分析垂荡式波浪能装置的波浪载荷、浮子与平台连接处的受力情况。数值计算系统的运动响应,并将计算结果与已有的试验数据进行比较验证,结果表明数值模拟的垂荡式波能装置的运动响应与试验结果相符合。最后,应用本计算方法分析PTO(power take-off)参数对波能装置发电性能的影响。  相似文献   

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn   总被引：1，自引：1，他引：0  

曹留帅  朱军  万文彬 《海洋工程》2016,(1):57-68

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.  相似文献   

基于地理格网分级法提取的中国传统村落空间分布     

余亮  孟晓丽 《地理科学进展》2016,35(11):1388-1396

中国传统村落真实地记录了建筑、民俗民风和较原始的民居空间形态,是千百年来人类与自然和谐共存的生活基础。随着城市化进程加快,传统村落的存续受到了很大的挑战,为了更好地保护利用传统村落,对其进行多视角的研究尤为重要,除了微观层面的具体保护措施外,还应加强宏观层面的空间分布研究。地理格网是表达复杂地理现象、综合分析自然与人文数据、模拟地理系统功能与行为的基本方法。本文从百度影像地图提取村落坐标,并截取遥感影像作为村落点数据的判断补充,在此基础上,运用地理格网的分级法,对国家公布的三批中国传统村落(2555个)数据进行空间格局分析,结果表明：这些村落主要分布在中国东南部,如落在一级格网Ⅰ18、Ⅰ19就分别有586、781个村落,占三批传统村落总数的96.6%。通过对二级和三级格网的村落分布离散性进行分析,使传统村落的空间分布数据结构更加系统和清晰有序,为合理构建其数据库提供了框架基础。  相似文献   

南极长城站验潮站数据处理和潮汐特点初步分析          下载免费PDF全文

张保军王泽民  安家春艾松涛 柯灝 《极地研究》2016,28(4):498-504

继在南极中山站建成我国南极首个永久性验潮站后,2012年1月在南极长城站又建成了我国南极第二个永久性验潮站。通过对长城站验潮站相关数据进行分析处理,得到了验潮基准系统的水准网平差结果和验潮仪零点标定结果,以及长城站附近海域海洋潮汐170个分潮的调和常数,并据此进行了潮汐预报,同时分析了长城站潮汐余水位的变化特征,探讨了利用附近的Antarctic Base Prat验潮站的余水位改正长城站潮汐预报的可行性,结果表明使用Antarctic Base Prat验潮站余水位改正长城站潮汐预报,可以显著提高长城站验潮站潮汐预报的精度,余水位改正后2014时段的潮汐预报中误差为±3.42 cm,明显好于改正前的预报中误差±10.43 cm。  相似文献   

Integration of GIS and video surveillance     

Aleksandar Milosavljević  Dejan Rančić  Aleksandar Dimitrijević  Bratislav Predić  Vladan Mihajlović 《International journal of geographical information science》2016,30(10):2089-2107

This paper discusses the integration of three-dimensional (3D) geographic information systems (GIS) and video surveillance systems using augmented reality (AR) techniques. The motivation for this integration is to overcome problems faced by conventional video surveillance systems. Explicit information concerning which camera currently monitors what area in such systems is missing; therefore, insight into the situation depends heavily on the operator’s training and experience. To ensure the complete coordination and monitoring of a situation in a system with multiple cameras, it is necessary to introduce a single reference system. GIS arises as a natural solution because it not only provides a solid ground truth but also provides semantic information that can be highly important in certain video surveillance applications. To integrate information into a GIS application, that information must be georeferenced. Based on our previous research regarding the addition of georeferencing information to surveillance video, this paper introduces models that can be applied to help integrate video and GIS. With an analogy to Milgram’s continuum between the real world and virtual reality, and analogous to the augmented reality and augmented virtuality in Milgram’s continuum, two models of integration are defined here: GIS-augmented video and video-augmented GIS. Then, we define the architecture of GIS-based video surveillance based on these proposed integration models, and finally, a prototype is implemented. The implemented prototype serves as a basis for analysing possible applications of real-world systems based on the integration of GIS and video.  相似文献