柱顶层间隔震体系增量动力响应研究          下载免费PDF全文

袁梦醒  陈望  刘彦辉  谭平  金建敏 《地震工程学报》2020,42(4):872-880

针对悬臂柱顶有拉梁和无拉梁层间隔震体系的抗震性能问题,运用增量动力分析(IDA)方法进行弹塑性分析,模拟结构从弹性到弹塑性直至最后倒塌的全过程。通过调幅地震动得到相应的层间位移角及峰值加速度,分别绘制单条与多条IDA曲线分析拉梁对隔震结构动力响应的影响,研究两种结构的抗震性能。结果表明:在相同性能点,有拉梁和无拉梁对纤维铰弯矩值和曲率值基本无影响,而在不同性能点,纤维铰状态明显不同;两种体系从正常使用阶段到防止倒塌阶段所需的加速度峰值的差距慢慢增大;在极罕遇地震下,柱顶有拉梁层间隔震体系的下部结构抗震性能要高于柱顶无拉梁层间隔震体系。  相似文献   

基于AUKF的框架结构离线模型更新混合试验方法     

陈凡  郭玉荣 《地震工程与工程振动》2020,(1):162-170

模型更新混合试验在传统混合试验方法的基础上更新与试验构件具有相同恢复力特性的构件,扩展了混合试验方法的应用范围。本文旨在提高模型更新混合试验的精度,降低试验的成本并简化模型更新混合试验方法的流程。自适应UKF(AUKF)算法在传统UKF的基础上加入方差自适应模块,能够减轻初始参数设定对参数识别结果的影响,本文基于AUKF提出一种模型更新混合试验方法。对以Bouc-Wen为恢复力模型的防屈曲约束支撑(BRB)进行低周反复加载虚拟试验,通过Matlab编制AUKF算法程序进行参数识别,验证了AUKF算法的高效准确性。对一榀8层4跨带BRB的钢框架进行混合试验数值仿真,结果表明离线模型更新试验结果较在线模型更新更接近真实结果,且简化了试验流程。  相似文献   

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations     

Michele Godio  Katrin Beyer 《地震工程与结构动力学》2019,48(4):454-475

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.  相似文献   

基于FFT-MA谱模拟的快速随机反演方法研究   总被引：3，自引：2，他引：1       下载免费PDF全文

王保丽  印兴耀  丁龙翔  张广智  孙瑞莹 《地球物理学报》2015,58(2):664-673

虽然基于地质统计学的随机反演方法能够有效融合测井资料中的高频信息,但计算效率低,占用内存大,限制了它在实际资料中的应用.本文在保留传统随机反演方法优点的基础上,创造性地引入傅里叶滑动平均(Fast Fourier Transform-Moving Average,FFT-MA)谱模拟进行频率域的地质统计模拟,并利用逐步变形算法(Gradual Deformation Method,GDM)确保模拟结果与实际地震数据的匹配,构建了基于FFT-MA谱模拟的新的快速随机反演方法.与常规随机反演相比,新方法不仅分辨率高,而且能够使反演解得到快速收敛,有效提高计算效率,减少内存占用.模型试算获得了与理论模型吻合度较好的高分辨率反演结果.实际资料分析也表明新方法所得到的高分辨率反演结果能够对薄互储层进行良好的展示,为薄储层的识别提供高效可靠的技术支持.  相似文献   

Efficient Bayesian sensor placement algorithm for structural identification: a general approach for multi‐type sensory systems          下载免费PDF全文

Ka‐Veng Yuen  Sin‐Chi Kuok 《地震工程与结构动力学》2015,44(5):757-774

In this paper, a Bayesian sequential sensor placement algorithm, based on the robust information entropy, is proposed for multi‐type of sensors. The presented methodology has two salient features. It is a holistic approach such that the overall performance of various types of sensors at different locations is assessed. Therefore, it provides a rational and effective strategy to design the sensor configuration, which optimizes the use of various available resources. This sequential algorithm is very efficient due to its Bayesian nature, in which prior distribution can be incorporated. Therefore, it avoids the possible unidentifiability problem encountered in a sequential process, which starts with small number of sensors. The proposed algorithm is demonstrated using a shear building and a lattice tower with consideration of up to four types of sensors. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

An investigation into the effects of damping and nonlinear geometry models in earthquake engineering analysis          下载免费PDF全文

Andrew Hardyniec  Finley Charney 《地震工程与结构动力学》2015,44(15):2695-2715

The growing emphasis of considering the behavior of structures at extreme performance states, such as collapse, has necessitated the characterization of the effects of varying attributes of the structural model. One source of variability that has not previously been considered is variability in the mathematical model. This study investigated the effects of changing the geometric nonlinearity approach and damping model on a four‐story buckling restrained braced frame, a four‐story steel moment resisting frame, and an eight‐story steel moment resisting frame. The variations in behavior are quantified using the maximum interstory drift ratio as the performance metric and qualified by comparing the relative displaced shapes and component response histories at the collapse performance state. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Implementation of online model updating in hybrid simulation          下载免费PDF全文

M. Javad Hashemi  Armin Masroor  Gilberto Mosqueda 《地震工程与结构动力学》2014,43(3):395-412

Hybrid simulation combines numerical and experimental methods for cost‐effective, large‐scale testing of structures under simulated earthquake loading. Structural system level response can be obtained by expressing the equation of motion for the combined experimental and numerical substructures, and solved using time‐stepping integration similar to pure numerical simulations. It is often assumed that a reliable model exists for the numerical substructures while the experimental substructures correspond to parts of the structure that are difficult to model. A wealth of data becomes available during the simulation from the measured experiment response that can be used to improve upon the numerical models, particularly if a component with similar structural configuration and material properties is being tested and subjected to a comparable load pattern. To take advantage of experimental measurements, a new hybrid test framework is proposed with an updating scheme to update the initial modeling parameters of the numerical model based on the instantaneously‐measured response of the experimental substructures as the test progresses. Numerical simulations are first conducted to evaluate key algorithms for the selection and calibration of modeling parameters that can be updated. The framework is then expanded to conduct actual hybrid simulations of a structural frame model including a physical substructure in the laboratory and a numerical substructure that is updated during the tests. The effectiveness of the proposed framework is demonstrated for a simple frame structure but is extendable to more complex structural behavior and models. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

钢桁梁桥基于模型修正方法的损伤程度识别研究     

淳庆  邱洪兴 《地震工程与工程振动》2005,25(2):114-118

在钢桁梁桥模型损伤定位的基础上,采用模型修正方法对其损伤程度进行识别,对其中几个关键问题进行了研究分析,得出了一些有用的结论,可作为实际桥梁健康监测的参考依据。  相似文献   

基于IDA的高墩大跨桥梁地震易损性分析   总被引：2，自引：0，他引：2  

吴文朋  李立峰  王连华  黄佳梅 《地震工程与工程振动》2012,32(3):117-123

针对目前我国桥梁抗震设计规范仅适用于墩高40m以下规则桥梁的现状,以一常见山区高墩大跨连续刚构桥为研究对象,采用IDA方法分析了桥梁结构在15条地震动下的动态响应,得到桥墩各截面在所有地震动作用下的曲率包络图。以高墩最不利截面的材料损伤应变所对应的截面曲率为损伤指标,结合能力需求比对数回归分析,计算了高墩在不同损伤状态下的破坏概率,建立了墩柱易损性曲线,同时还建立了梁端支座的易损性曲线。基于联合失效概率分析方法,形成了桥梁系统易损性曲线。分析结果表明:薄壁空心墩连续刚构桥在强地震作用下高墩发生破坏的部位主要集中在墩顶和墩底区域;墩柱发生完全破坏的概率极小,但桥台处梁端活动支座的地震损伤概率较高;桥梁系统损伤概率能够更加准确地反映高墩大跨桥梁的真实抗震性能。  相似文献   

海量多源1∶50000正射影像数据建库与集成更新     

王发良  廖安平  朱秀丽  张宏伟 《地理信息世界》2012,(1):22-26,31

高分辨率正射影像不仅是1∶50 000地形数据库更新的数据源,也是1∶50 000数据库更新工程的重要数据产品。本文针对国家1∶50 000更新工程DOM数据库建设目标和要求,提出了建库总体思路、技术方法和海量多源正射影像数据库的技术设计,面向正射影像数据库管理与分发服务需求研制开发了影像库集成管理与数据服务系统软件,实现影像成果数据集成管理和分发服务一体化。  相似文献