Application of Linear Mean-Square Estimation in Ocean Engineering     

王莉萍  陈柏宇  陈超  陈正寿  刘桂林 《海洋工程》2016,(1):149-160

The attempt to obtain long-term observed data around some sea areas we concern is usually very hard or even impossible in practical offshore and ocean engineering situations. In this paper, by means of linear mean-square estimation method, a new way to extend short-term data to long-term ones is developed. The long-term data about concerning sea areas can be constructed via a series of long-term data obtained from neighbor oceanographic stations, through relevance analysis of different data series. It is effective to cover the insufficiency of time series prediction method’s overdependence upon the length of data series, as well as the limitation of variable numbers adopted in multiple linear regression model. The storm surge data collected from three oceanographic stations located in Shandong Peninsula are taken as examples to analyze the number-selection effect of reference oceanographic stations (adjacent to the concerning sea area) and the correlation coefficients between sea sites which are selected for reference and for engineering projects construction respectively. By comparing the N-year return-period values which are calculated from observed raw data and processed data which are extended from finite data series by means of the linear mean-square estimation method, one can draw a conclusion that this method can give considerably good estimation in practical ocean engineering, in spite of different extreme value distributions about raw and processed data.  相似文献   

基于人工鱼群算法和SCA等效理论的井中横波速度预测方法     

魏忠宇  刘财  郭智奇  张冰  刘喜武 《世界地质》2018,37(1):282-288

在建立页岩岩石物理模型的基础上,根据等效自相容近似(SCA)岩石物理模型,构建出岩石的纵波速度、横波速度与岩石密度、组分和孔隙度等的定量关系,得出使理论纵波速度和实际纵波速度最接近的孔隙纵横比,进而将该孔隙纵横比作为约束条件来实现横波速度预测。反演算法利用人工鱼群算法来计算最佳孔隙纵横比,并将预测的横波速度与实际测得的横波速度对比,证明了人工鱼群算法的有效性。  相似文献   

Application of Geochemistry and VNIR Spectroscopy in Mapping Heavy Metal Pollution of Stream Sediments in the Takab Mining Area, NW of Iran     

Parisa PIROOZFAR  Samad ALIPOUR  Soroush MODABBERI  David COHEN 《《地质学报》英文版》2018,92(6):2382-2394

This study considered the possibility of using visible and near infrared (VNIR) spectral absorption feature parameters (SAFPs) in predicting the concentration and mapping the distribution of heavy metals in sediments of the Takab area. In total, 60 sediment samples were collected along main streams draining from the mining districts and tailing sites, in order to measure the concentration of As, Co, V, Cu, Cr, Ni, Hg, Ti, Pb and Zn and the reflectance spectra (350–2500 nm). The quantitative relationship between SAFPs (Depth500nm, R610/500nm, R1344/778nm, Area500nm, Depth2200nm, Area2200nm, Asym2200nm) and geochemical data were assessed using stepwise multiple linear regression (SMLR) and enter multiple linear regression (EMLR) methods. The results showed a strong negative correlation between Ni and Cr with Area2200nm, a significant positive correlation between As and Asym2200nm, Ni and Co with Depth2200nm, as well as Co, V and total values with Depth500nm. The EMLR method eventuated in a significant prediction result for Ni, Cr, Co and As concentrations based on spectral parameters, whereas the prediction for Zn, V and total value was relatively weak. The spatial distribution pattern of geochemical data showed that mining activities, along with the natural weathering of base metal occurrences and rock units, has caused high concentrations of heavy metals in sediments of the Sarough River tributaries.  相似文献   

Assessing the efficiency of shape-based functions and descriptors in multi-scale matching of linear objects     

Rahim Ali Abbaspour  Alireza Chehreghan  Amer Karimi 《国际地球制图》2018,33(8):879-892

  相似文献   

矿石体重回归分析在新疆乌宗布拉克矿区的应用研究          下载免费PDF全文

毛红伟 《地质找矿论丛》2021,36(2):228-232

在资源储量估算的过程中,矿石小体重的准确与否将直接影响到资源储量估算的客观程度。对矿石小体重的准确预测将需要通过大量的统计分析工作,传统的方法是利用矿石小体重的算术平均值进行估算矿床资源储量,并没有考虑到多矿种对矿石小体重的影响程度。本文利用Excel软件"数据分析"的"回归"功能模块,对实验室所测定的矿石小体重值与其对应品位进行二元线性回归分析,快速、准确地构建矿石体重与其品位的数学模型,从而为资源储量估算提供了更客观、更科学的矿石体重模型。  相似文献   

Generation of oceanic internal gravity waves by a cyclonic surface stress disturbance     

《Dynamics of Atmospheres and Oceans》2019

Atmospheric cyclones with strong winds significantly impact ocean circulation, regional sea surface temperature, and deep water formation across the global oceans. Thus they are expected to play a key role in a variety of energy transport mechanisms. Even though wind-generated internal gravity waves are thought to contribute significantly to the energy balance of the deep ocean, their excitation mechanisms are only partly understood.The present study investigates the generation of internal gravity waves during a geostrophic adjustment process in a Boussinesq model with axisymmetric geometry. The atmospheric disturbance is set by an idealized pulse of cyclonic wind stress with a Rankine vortex structure. Strength, radius and duration of the forcing are varied. The effect upon wave generation of stratification with variable mixed-layer depth is also examined.Results indicate that internal gravity waves are generated after approximately one inertial period. The outward radial energy flux is dominated by waves having structure close to vertical mode-1 and with frequency close to the inertial frequency. Less energetic higher mode waves are observed to be generated close to the sea floor underneath the storm. The total radiated energy corresponds to approximately 0.02% of the wind input. Deeper mixed-layer conditions as well as weaker stratification reduce this fraction.The low energy transfer rates suggest that other processes that drive vertical motion like surface heat fluxes, turbulent motion, mixed region collapse and storm translation are essential for significant energy extraction by internal gravity waves to occur.  相似文献   

线性化物理过程对GRAPES 4DVAR同化的影响   总被引：8，自引：3，他引：5  

刘永柱  龚建东  张林  陈起英 《气象学报》2019,77(2):196-209

线性化物理过程能够改善四维变分同化中极小化收敛的稳定性和增加极小化过程中对大气物理过程和动力更加精确的描述,它是四维变分同化中非常重要的一部分。通过在GRAPES全球模式中研究线性化物理过程,尤其是两个湿线性化物理过程,改善切线性模式预报精度,来提高GRAPES全球四维变分同化的分析和预报效果。线性化物理过程的开发首先需要简化原非线性化物理过程中的强非线性项,然后对线性化物理过程进行规约化,以抑制切线性扰动的异常增长。目前GRAEPS全球模式中的线性化物理过程主要包括次网格尺度地形参数化、垂直扩散、积云深对流和大尺度凝结。线性化物理过程预报精度的检验方法是通过选择合适大小的初始扰动（同化分析增量）,来比较非线性模式和切线性模式中的扰动演化的纬向平均误差。然后以绝热版本的切线性模式为基础,通过冬、夏两个个例试验来分别检验4个线性化物理过程的12 h预报效果。试验结果表明,通过添加次网格地形参数化和垂直扩散两个干线性化物理过程方案,可以有效抑制住绝热版本切线性模式低层扰动的异常增长,大幅度改善切线性模式预报效果。通过添加积云深对流和大尺度凝结两个湿线性化物理过程,可以在热带区域和中、高纬度地区提高切线性模式中湿变量和温度变量的近似精度,提高GRAPES全球四维变分同化的分析和预报效果。   相似文献   

GRAPES全球奇异向量方法改进及试验分析   总被引：4，自引：0，他引：4  

李晓莉  刘永柱 《气象学报》2019,77(3):552-562

基于总能量模的奇异向量扰动常用于构造集合预报的初始条件。以建立GRAPES（Global and Regional Assimilation PrEdiction System）全球集合预报系统为目的,基于前期研发的GRAPES全球模式奇异向量方法,在GRAPES全球切线性模式和伴随模式2.0版的框架下,开展了引入线性化边界层方案来改善奇异向量结构,并提高奇异向量计算效率的研究。通过连续试验,从奇异向量的扰动能量结构、扰动能量谱及扰动空间分布等方面,综合分析改进GRAPES全球奇异向量的结构及演变特征。试验结果表明,改进后的GRAPES奇异向量方法有效抑制了之前扰动能量在近地面层不合理的快速增长,同时,奇异向量最优扰动的结构更客观地体现了中高纬度区域大气初始条件中的斜压不稳定扰动及其演变,如在初始时刻奇异向量扰动能量主要位于对流层中层,并呈现出随高度向西倾斜的大气斜压特征;经过线性化演变,扰动能量向较大水平尺度转移,并在垂直结构上表现出向对流层高层上传及向对流层低层下传的特征等。针对GRAPES奇异向量迭代求解中伴随模式计算耗时为主的情况,改进伴随模式中广义共轭余差方案的调用方式,并采用大内存存储法来提高其计算效率,进而将奇异向量总计算时间缩短了25%。总之,改进后的GRAPES奇异向量方法,可应用于构建面向业务应用的GRAPES全球集合预报系统。   相似文献   

基于镜像图的LRC和CRC偏差结合的人脸识别     

陈铭  周先春  周杰 《南京气象学院学报》2019,11(3):340-345

为了提高人脸识别率及更好地显示人脸特征,本文提出了一种基于镜像图的LRC和CRC偏差结合的人脸识别方法.该方法首先生成一种镜像人脸,再通过融合原始人脸和镜像人脸形成新的混合训练样本,最后利用LRC和CRC偏差结合进行人脸识别.新方法增加了训练样本的数目,克服了由于光照和姿态等外部因素带来的影响.实验结果表明,镜像图与LRC和CRC偏差结合的人脸识别方法提高了人脸识别的准确性.  相似文献   

PROPERTY MATRICES IDENTIFICATION OF UNBOUNDED MEDIUM FROM UNIT-IMPULSE RESPONSE FUNCTIONS USING LEGENDRE POLYNOMIALS: FORMULATION     

A. PARONESSO  J. P. WOLF 《地震工程与结构动力学》1996,25(11):1231-1245

A systematic procedure to construct the (symmetric) static-stiffness, damping and mass matrices representing the unbounded medium is presented addressing the unit-impulse response matrix corresponding to the degrees of freedom on the structure–medium interface. The unit-impulse response matrix is first diagonalized which then permits each term to be modelled independently from the others using expansions in a series of Legendre polynomials in the time domain. This leads to a rational approximation in the frequency domain of the dynamic-stiffness coefficient. Using a lumped-parameter model which provides physical insight the property matrices are constructed.  相似文献