IEC的风机选型参数估算方法在中国的适用性研究     

黄林宏  宋丽莉  李刚  王丙兰  张永山 《气象》2016,42(12):1522-1530

国际电工委员会编制的《风力发电机组设计要求》(IEC 61400-1)推荐了针对风电机组安全等级评估的极端风速和湍流强度特征值估算方法,因其简单便捷,在风电领域被广泛采用。利用全国风能资源专业观测网的193座测风塔观测数据,对IEC推荐的极端风速计算方法与我国规范推荐的基于极值I型概率分布方法进行比较,发现两种方法计算的193座塔70 m高度层50年一遇10 min平均最大风速,仅有7座测风塔较为一致,差异在±1%;IEC推荐方法的计算结果多数偏小,其中偏小10%以上的测风塔有121座,偏小30%以上的有44座测风塔,而偏大10%以上的只有9座测风塔;IEC方法计算的极值风速大幅度偏小的测风塔主要分布在台风影响的东南沿海地区,偏差较小的测风塔主要分布在西北和华北地形平缓区域,但同时偏大10%以上的测风塔也多分布在这一地区。以目前行业领域普遍采用的以15 m·s~(-1)风速的平均湍流强度作为风电机组选型指标,与严格按照规范,以15 m·s~(-1)风速段所有样本湍流强度的90%分位数处的值作为指标进行风电机组等级确定作对比,发现193座塔中有46座塔的选型是不安全的,甚至相差两个等级。  相似文献   

青藏高原和亚洲夏季风动力学研究的新进展   总被引：4，自引：1，他引：3  

吴国雄  何编  刘屹岷  包庆  任荣彩  刘伯奇 《大气科学》2016,40(1):22-32

亚洲夏季风环流受海陆和伊朗高原—青藏高原大地形的热力作用调控.亚洲季风所释放的巨大潜热又对大气环流形成反馈.这种相互反馈过程十分复杂,揭示其物理过程对理解气候变化格局的形成和变化以及提高天气预报及气候预测的准确率十分重要.夏季北半球副热带对流层上层环流的主要特征是存在庞大的南亚高压(SAH)以及强大的对流层上层温度暖中心(UTTM).本文介绍了温度—加热垂直梯度(T-Q_Z)理论的发展,并用以揭示SAH和UTTM的形成机制.指出沿副热带欧亚大陆东部的季风对流潜热加热及其中西部的表面感热加热和高层长波辐射冷却是导致SAH和UTTM在南亚上空发展的原因.文中还介绍了Gill模型用于上部对流层研究的局限性及解决的办法.  相似文献   

以SRTM-DEM为控制的光学卫星遥感立体影像正射纠正   总被引：3，自引：1，他引：2  

张浩  张过  蒋永华  汪韬阳 《测绘学报》2016,45(3):326-331

针对全球测图缺少统一的控制基准的问题,提出了利用SRTM-DEM作为控制基准,对光学卫星遥感影像进行正射纠正的方法。首先,对光学卫星影像构建的立体影像对进行自由网平差并制作DEM;然后,以SRTM-DEM作为控制,将DEM作为单元模型,进行独立模型法DEM区域网平差,获得单元模型的定向参数;最后,改正立体影像的成像几何模型参数,进行正射纠正。选取湖北咸宁和江西某地两个测区的资源三号数据进行试验,试验结果表明,资源三号正视全色影像的平面定向精度由12.93像素提高到6.85像素。  相似文献   

纹理特征向量与最大化熵法相结合的SAR影像非监督变化检测   总被引：1，自引：0，他引：1  

庄会富  邓喀中  范洪冬 《测绘学报》2016,45(3):339-346

合成孔径雷达(SAR)影像具有明显的斑点噪声,在变化检测中,一般需要考虑空间邻域信息。本文结合SAR影像丰富的纹理信息,提出一种考虑空间邻域信息的高分辨率SAR影像非监督变化检测方法,用基于灰度共生矩阵(GLCM)的32维纹理特征向量构造差异影像。通过最大化熵法自动选取阈值,对精度指标随窗口大小的变化进行回归分析,得到适合于变化检测的窗口为11×11。试验表明,本文方法优于马尔科夫随机场法,可以减小斑点噪声的影响,有效提高高分辨率SAR影像变化检测的精度。  相似文献   

基于有理多项式模型的GF4卫星区域影像平差处理方法及精度验证     

皮英冬  杨博  李欣 《测绘学报》2016,45(12):1448-1454

分析了我国首颗静止轨道光学遥感卫星高分四号(GF4)特有的区域成像模式的几何特性,基于静止轨道成像基高比较小的几何特性提出一种利用平均高程面的区域网平差方法。该方法针对GF4卫星影像构建了基于有理多项式模型RFM的区域网平差模型,并在无控制条件下,对GF4卫星区域影像进行区域网平差处理,解决了GF4号区域影像由于定轨误差、定姿误差、大气折光以及镜头畸变等因素导致的拼接精度较低的问题。最后,通过两组真实数据试验对本文方法的精度及有效性进行了验证,同时分析了采用不同的误差补偿模型对于平差结果精度的影响。  相似文献   

一种天绘一号卫星影像精确定位方法     

周欣  王海岩  杨国鹏 《测绘科学》2016,41(11):5-9,129

针对如何最大程度地减小天绘一号卫星RPC模型系统误差,真实反映像方坐标与物方坐标关系的问题,该文介绍了天绘一号卫星的基本情况及相应的RPC参数模型,给出了求解RPC参数的基本方法和流程。结合天绘一号卫星采用等效框幅式光束法平差进行无控定位的特点,利用平差后计算得到的加密点坐标,提出了一种基于像点仿射变换的RPC模型区域网平差方法,并进行了RPC参数修正。经天绘一号卫星精度检测实验表明,修正后的RPC参数能有效地弥补系统性误差,具有更高的定位精度。  相似文献   

Temporal replication of the national land cover database using active machine learning     

Galen J. Maclaurin 《地理信息系统科学与遥感》2016,53(6):759-777

Regional and national level land cover datasets, such as the National Land Cover Database (NLCD) in the United States, have become an important resource in physical and social science research. Updates to the NLCD have been conducted every 5 years since 2001; however, the procedure for producing a new release is labor-intensive and time-consuming, taking 3 or 4 years to complete. Furthermore, in most countries very few, if any, such releases exist, and thus there is high demand for efficient production of land cover data at different points in time. In this paper, an active machine learning framework for temporal updating (or backcasting) of land cover data is proposed and tested for three study sites covered by the NLCD. The approach employs a maximum entropy classifier to extract information from one Landsat image using the NLCD, and then replicate the classification on a Landsat image for the same geographic extent from a different point in time to create land cover data of similar quality. Results show that this framework can effectively replicate the land cover database in the temporal domain with similar levels of overall and within class agreement when compared against high resolution reference land cover datasets. These results demonstrate that the land cover information encapsulated in the NLCD can effectively be extracted using solely Landsat imagery for replication purposes. The algorithm is fully automated and scalable for applications at landscape and regional scales for multiple points in time.  相似文献   

Modeling the risk of spread and establishment for Asian longhorned beetle (Anoplophora glabripennis) in Massachusetts from 2008-2009     

Andrew J. Shatz  Florencia Sangermano  Jennifer Miller  Arthur Elmes 《国际地球制图》2016,31(8):813-831

Land managers responsible for invasive species removal in the USA require tools to prevent the Asian longhorned beetle (Anoplophora glabripennis) (ALB) from decimating the maple-dominant hardwood forests of Massachusetts and New England. Species distribution models (SDMs) and spread models have been applied individually to predict the invasion distribution and rate of spread, but the combination of both models can increase the accuracy of predictions of species spread over time when habitat suitability is heterogeneous across landscapes. First, a SDM was fit to 2008 ALB presence-only locations. Then, a stratified spread model was generated to measure the probability of spread due to natural and human causes. Finally, the SDM and spread models were combined to evaluate the risk of ALB spread in Central Massachusetts in 2008–2009. The SDM predicted many urban locations in Central Massachusetts as having suitable environments for species establishment. The combined model shows the greatest risk of spread and establishment in suitable locations immediately surrounding the epicentre of the ALB outbreak in Northern Worcester with lower risk areas in suitable locations only accessible through long-range dispersal from access to human transportation networks. The risk map achieved an accuracy of 67% using 2009 ALB locations for model validation. This model framework can effectively provide risk managers with valuable information concerning the timing and spatial extent of spread/establishment risk of ALB and potential strategies needed for effective future risk management efforts.  相似文献   

Discussion on applying an analytical method to optimize the anti-freeze design parameters for underground water pipelines in seasonally frozen areas     

Ji Chen  JingYi Zhao  Kun Li  Yu Sheng 《寒旱区科学》2016,8(6):467-476

Adopting the quasi-three-dimensional (Quasi-3D) numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe conveyance distance (SCD) of a water pipeline and six influencing factors are established based on the lowest water temperature (LWT) along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration (MFP) instead of the mean annual ground surface temperature (MAGST) and soil water content (SWC) to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is established based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters: the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.  相似文献   

上海砂性软土地层水平定向钻进泥浆性能调控技术     

朱永刚  郑文龙  乌效鸣  张晓静  林朋皓  朱旭明 《探矿工程》2018,45(5):58-62

上海地区水平定向钻进铺管（HDD）钻遇不易成孔的砂性软土的概率甚高,这种地层对泥浆性能有特殊要求。但目前普遍使用的复配型增效商品土粉基调相近,难以就大量工程个案恰如其分地发挥关键功效。为此,论述了该类工程环境下泥浆性能设计要点,分析了材料添配的作用机理,重点给出了泥浆密度、粘度、切力以及失水量等参数调控的宜于实用的若干配材技术,以提供相类似工程条件下泥浆运用的可参考方法。  相似文献