IPCC第六次气候变化评估中的气候约束预估方法   总被引：1，自引：0，他引：1  

周佰铨  翟盘茂 《气象学报》2021,79(6):1063-1070

得益于第五次评估报告（AR5）以来约束预估研究的迅速发展,观测约束成为政府间气候变化专门委员会（IPCC）第一工作组（WGI）第六次评估报告（AR6）提升对未来预估约束的证据链中的重要一环。IPCC第一工作组第六次评估报告首次利用包括根据历史模拟温度升高幅度得到的观测约束、多模式预估以及第六次评估报告中更新的气候敏感度在内的多条证据链来约束全球地表温度未来变化的预估,减小了多模式预估的不确定性。文中回顾并介绍了IPCC第一工作组第六次评估报告中涉及的几种主要观测约束方法（多模式加权方法、基于归因结论的约束方法（ASK方法）、萌现约束方法）及其应用情况。在IPCC第一工作组第六次评估报告以及很多针对不同区域不同变量的预估研究中,观测约束方法均显示出了订正模式误差、改善模式预估的潜力。相比而言,目前中国在观测约束预估方面的研究还不多,亟待加强观测约束方法研究以及在中国区域气候变化预估中的应用,为中国应对气候变化的政策制定和适应规划提供更丰富、不确定性更小的未来气候信息。   相似文献   

应用分块矩阵求逆解算约束秩亏间接平差模型     

谢波  刘连旺 《大地测量与地球动力学》2021,41(2):157-161

在通常的四分块矩阵求广义逆矩阵和凯利逆矩阵公式基础上,分析左上角子矩阵为秩亏、右下角子矩阵为零的特殊四分块矩阵的凯利逆矩阵存在条件,应用广义逆矩阵法和矩阵变换法推导该类特殊四分块矩阵的凯利逆矩阵显性表达公式,并用于解算约束秩亏间接平差模型的参数估计。实验数据表明,当满足存在性条件时,应用分块矩阵求逆公式解算约束秩亏间接平差模型的结果与间接平差模型的解算结果一致,表明推导的显性表达公式具有可行性。  相似文献   

基于相对定向和三角形约束的近景影像匹配     

邹峥嵘  谢萍  刘明选  肖奇 《测绘工程》2011,20(5):22-25

针对近景影像自动相对定向过程中初匹配点对中误匹配率较大的情况,将基于三角形约束方法引入近景影像匹配.首先利用Harris算子提取特征点集,经初匹配后运用基于RANSAC方法和P-H算法的相对定向构建核线几何得到内点集,删除误匹配点生成同名Delaunay三角网;在同名三角形的约束下通过缩小Harris特征点阈值得到新内...  相似文献   

基于最小二乘法道路平面曲线拟合   总被引：2，自引：0，他引：2  

高盼  郭广礼 《测绘信息与工程》2011,36(2):19-21

结合最小二乘法的基本原理,利用其进行道路平面曲线拟合,实例表明,与三次样条函数设计计算结果接近,同样能满足路线设计要求,且简化了计算过程,在平面设计工作中具有很强的实用性。  相似文献   

基于线性模型的二维直角坐标变换     

李建章  武生荣 《测绘科学》2011,36(6):56-57

二维直角坐标变换模型在工程领域中应用非常广泛,该模型是一个非线性模型,对于多公共点的二维直角坐标变换需要进行模型的线性化,计算待求参数的近似值,再利用间接平差原理计算各待求参数最或然值。本文在非线性模型基础上推导出一个线性模型,利用该模型进行二维直角坐标变换,无需计算待求参数近似值,对于涉及到二维直角坐标变换的问题,可以简化其解算过程。  相似文献   

采用联合平差法处理附有病态等式约束的反演问题   总被引：1，自引：0，他引：1  

马洋  欧吉坤  袁运斌  王海涛 《武汉大学学报(信息科学版)》2011,(7):816-819

探讨了附有病态等式约束的反演问题,尝试用降秩处理方法解这类病态约束问题,通过算例验证了此种方法与截断奇异值方法是等价的。然后提出了一种联合平差方法,它不仅能解病态的约束问题,而且能解决主模型秩亏或病态同时约束模型病态的问题,增强了应用性。最后设计了多种方案进行计算和比较,验证了联合平差法的有效性和可行性。  相似文献   

机载LiDAR点云数据的建筑物重建研究   总被引：5，自引：2，他引：3  

曾齐红  毛建华  李先华  刘学锋 《武汉大学学报(信息科学版)》2011,(3):321-324,328

提出了利用机载LiDAR点云数据进行复杂平面建筑物重建的方法。首先,将提取出的建筑物点云聚类到不同的平面点集;然后,对各个平面点集进行平面拟合,采用平面相交确定平面边界,并解算出各平面边界角点的三维坐标,从而重建建筑物模型。某区域的机载LiDAR点云数据的实验结果表明,该方法能有效地重建出较复杂的平面建筑物。  相似文献   

Pyrite–anhydrite–magnetite–pyroxene-type deposits and coexisting hydrothermal fluids in Mesozoic volcanic basins, Yangtze River Valley, China     

Ronghua Zhang  Xuetong Zhang  Shumin Hu 《Ore Geology Reviews》2011,43(1):315-332

Anhydrite–pyrite–magnetite–pyroxene–type deposits occur in the Mesozoic volcanic areas of the Middle–Lower Yangtze Valley in China. These deposits are hosted in alkaline basaltic rocks, and are generally accompanied by melanocratic and leucocratic alteration zones, both of which are characterized by a distinct vertical zonation pattern. Investigation of these zones indicates that the chemical compositions of solid solutions and polymorphs of various minerals vary spatially in the alteration profile, upwards from the lowest level, and outwards from the center.Here we report a case study on the Luohe deposit. In the melanocratic-alteration zone, the composition of magnetite (including trace elements Ti, V, Mg, Mn), pyroxene (Mg, Fe²⁺, Fe³⁺, Al₂O₃), plagioclase (An_xAb_{1 − x}), pyrite (Co, Ni) and apatite (F, CeO₂ + Y₂O₃ + La₂O₃) changes with depth. The isotherms of hydrothermal fluids determined from fluid inclusion data, including homogenization temperature and salinity, also vary with depth.Activity diagrams were constructed from mineral and isotherm analysis to estimate the chemical constraints on the alteration-mineral assemblages and the coexisting hydrothermal solutions for the Na₂O–K₂O–CaO–MgO–FeO–Fe₂O₃–A1₂O₃–SiO₂–H₂SO₄–H₂S–HCI–H₂O system at 350 to 600 °C and 500 bars (50 MPa), assuming that the major alteration mineral assemblages along the profile reflect the nature of the coexisting hydrothermal solutions. The activity diagrams adopted the major minerals as buffers to fix the activities of the aqueous species in the system, simulating the physicochemical conditions of the magnetite–anhydrite–pyroxene equilibrium and of solid solutions of diopside–hedenbergite, grossular–andradite and anorthite–albite found in the profile.This study provides an approach to modeling the chemical constraints of coexisting fluids in ore-alteration zones based on field observations.  相似文献   

Geology and age of the Glikson impact structure,Western Australia     

F. A. Macdonald  M. T. D. Wingate  K. Mitchell 《Australian Journal of Earth Sciences》2013,60(4-5):641-651

The Glikson structure is an aeromagnetic and structural anomaly located in the Little Sandy Desert of Western Australia (23°59'S, 121°34′E). Shatter cones and planar microstructures in quartz grains are present in a highly deformed central region, suggesting an impact origin. Circumferential shortening folds and chaotically disposed bedding define a 19 km-diameter area of deformation. Glikson is located in the northwestern Officer Basin in otherwise nearly flat-lying sandstone, siltstone and conglomerate of the Neoproterozoic Mundadjini Formation, intruded by dolerite sills. The structure would not have been detected if not for its strong ring-shaped aeromagnetic anomaly, which has a 10 km inner diameter and a 14 km outer diameter. We interpret the circular magnetic signature as the product of truncation and folding of mafic sills into a ring syncline. The sills most likely correlate with dolerites that intrude the Boondawari Formation ～25 km to the north, for which we report a SHRIMP U?–?Pb baddeleyite and zircon age of 508?±?5 Ma, providing a precise older limit for the impact event that formed the Glikson structure.  相似文献   

Trust-region based instantaneous optimal semi-active control of long-span spatially extended structures with MRF-04K damper   总被引：1，自引：0，他引：1  

Wei Lin  Zhongxian Li  Yang Ding 《地震工程与工程振动(英文版)》2008,7(4):447-464

In the field of civil engineering, magnetorheological fluid （MRF） damper-based semi-active control systems have received considerable attention for use in protecting structures from natural hazards such as strong earthquakes and high winds. In this paper, the MRF damper-based semi-active control system is applied to a long-span spatially extended structure and its feasibility is discussed. Meanwhile, a _trust-region method based instantaneous optimal semi-active control algorithm （TIOC） is proposed to improve the performance of the semi-active control system in a multiple damper situation. The proposed TIOC describes the control process as a bounded constraint optimization problem, in which an optimal semi- active control force vector is solved by the trust-region method in every control step to minimize the structural responses. A numerical example of a railway station roof structure installed with MRF-04K dampers is presented. First, a modified Bouc- Wen model is utilized to describe the behavior of the selected MRF-04K damper. Then, two semi-active control systems, including the well-known clipped-optimal controller and the proposed TIOC controller, are considered. Based on the characteristics of the long-span spatially extended structure, the performance of the control system is evaluated under uniform earthquake excitation and travelling-wave excitation with different apparent velocities. The simulation results indicate that the MR fluid damper-based semi-active control systems have the potential to mitigate the responses of full-scale long-span spatially extended structures under earthquake hazards. The superiority of the proposed TIOC controller is demonstrated by comparing its control effectiveness with the clipped-optimal controller for several different cases.  相似文献