High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2          下载免费PDF全文

Jason Jweda  Louise Bolge  Cornelia Class  Steven L. Goldstein 《Geostandards and Geoanalytical Research》2016,40(1):101-115

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.  相似文献   

Interactive discovery of sequential patterns in time series of wind data     

Norhakim Yusof  Raul Zurita-Milla  Menno-Jan Kraak  Bas Retsios 《International journal of geographical information science》2016,30(8):1486-1506

Wind speed and direction vary over space and time due to the interactions between different pressures and temperature gradients within the atmospheric layers. Near the earth’s surface, these interactions are modulated by topography and artificial structures. Hence, characterizing wind behaviour over large areas and long periods is a complex but essential task for various energy-related applications. In this study, we present a novel approach to discover wind patterns by integrating sequential pattern mining and interactive visualization techniques. The approach relies on the use of the Linear time Closed pattern Miner sequence algorithm in conjunction with a time sliding window that allows the discovery of all sequential patterns present in the data. These patterns are then visualized using integrated 2D and 3D coordinated multiple views and visually explored to gain insight into the characteristics of the wind from a spatial, temporal and attribute (type of wind pattern) point of view. This proposed approach is used to analyse 10 years of hourly wind speed and direction data for 29 weather stations in the Netherlands. The results show that there are 15 main sequential patterns in the data. The spatial task shows that weather stations located in the same region do not necessarily experience similar wind pattern. For within the selected time interval, similar wind patterns can be observed in different stations and in the same station at different times of occurrence. The attribute task discovered that the repetitive occurrences of chosen pattern indicate as regular wind behaviour at different weather stations that persisted continuously over time. The results of these tasks show that the proposed interactive discovery facilitates the understanding of wind dynamics in space and time.  相似文献   

An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry          下载免费PDF全文

Wen Zhang  Liang Qi  Zhaochu Hu  Cunjiang Zheng  Yongsheng Liu  Haihong Chen  Shan Gao  Shenghong Hu 《Geostandards and Geoanalytical Research》2016,40(2):195-216

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.  相似文献   

Production and Certification of Synthetic Selenium Isotopic Reference Materials          下载免费PDF全文

Tongxiang Ren  Jun Wang  Hai Lu  Tao Zhou  Yuanjing Zhou 《Geostandards and Geoanalytical Research》2016,40(2):227-238

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.  相似文献   

Zircon M127 – A Homogeneous Reference Material for SIMS U–Pb Geochronology Combined with Hafnium,Oxygen and,Potentially, Lithium Isotope Analysis          下载免费PDF全文

Lutz Nasdala  Fernando Corfu  John W. Valley  Michael J. Spicuzza  Fu‐Yuan Wu  Qiu‐Li Li  Yue‐Heng Yang  Chris Fisher  Carsten Münker  Allen K. Kennedy  Peter W. Reiners  Andreas Kronz  Michael Wiedenbeck  Richard Wirth  Chutimun Chanmuang  Manuela Zeug  Tamás Váczi  Nicholas Norberg  Tobias Häger  Alfred Kröner  Wolfgang Hofmeister 《Geostandards and Geoanalytical Research》2016,40(4):457-475

In this article, we document a detailed analytical characterisation of zircon M127, a homogeneous 12.7 carat gemstone from Ratnapura, Sri Lanka. Zircon M127 has TIMS‐determined mean U–Pb radiogenic isotopic ratios of 0.084743 ± 0.000027 for ²⁰⁶Pb/²³⁸U and 0.67676 ± 0.00023 for ²⁰⁷Pb/²³⁵U (weighted means, 2s uncertainties). Its ²⁰⁶Pb/²³⁸U age of 524.36 ± 0.16 Ma (95% confidence uncertainty) is concordant within the uncertainties of decay constants. The δ¹⁸O value (determined by laser fluorination) is 8.26 ± 0.06‰ VSMOW (2s), and the mean ¹⁷⁶Hf/¹⁷⁷Hf ratio (determined by solution ICP‐MS) is 0.282396 ± 0.000004 (2s). The SIMS‐determined δ⁷Li value is ?0.6 ± 0.9‰ (2s), with a mean mass fraction of 1.0 ± 0.1 μg g^?1 Li (2s). Zircon M127 contains ~ 923 μg g^?1 U. The moderate degree of radiation damage corresponds well with the time‐integrated self‐irradiation dose of 1.82 × 10¹⁸ alpha events per gram. This observation, and the (U–Th)/He age of 426 ± 7 Ma (2s), which is typical of unheated Sri Lankan zircon, enable us to exclude any thermal treatment. Zircon M127 is proposed as a reference material for the determination of zircon U–Pb ages by means of SIMS in combination with hafnium and stable isotope (oxygen and potentially also lithium) determination.  相似文献   

渤海湾海岸带地区~(137)Cs参考剖面——意义、方法及初步结果     

王福  田立柱  姜兴钰  李建芬  杨彪  袁海帆  王宏 《地质通报》2016,35(10):1622-1629

海岸带地区近百年来的现代地质过程重建必须以精确的年代学研究为基础,~(137)Cs时标法和~(210)Pb_(exc)测年法是目前广泛应用的方法。由于易受到河流沉积物供给变化、潮位状况、极端天气事件等的影响,海岸带现代过程的定量研究一直是高分辨率研究的瓶颈。区域性参考剖面可以提升现代沉积物测年方法在海岸带应用中的可靠性。因此,建立区域性的~(210)Pb_(exc)和~(137)Cs比活度-深度参考剖面,将改善对海岸带及邻近海区实测数据的解释。以渤海湾海岸带为研究区,选取沉积环境相对稳定、水平搬运作用较小的地区,采用人工探坑、Eijkelkamp槽型取样器获取了2个柱状岩心,通过γ能谱仪对样品进行~(210)Pb、~(226)Ra及~(137)Cs比活度测试,绘制剖面图,结合研究区已有数据,总结出6类海岸带常见的~(210)Pb_(exc)和~(137)Cs比活度-深度剖面类型,并重建了渤海湾海岸带~(137)Cs区域性参考剖面。结果显示,~(137)Cs在渤海湾地区的最大峰值指示1963年,可以作为区域性主要参考时标。但是,最大峰值上部的次峰在不同区域指示不同的时标,S4和S5两个站位该峰值指示的并非1986年时标。  相似文献   

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise          下载免费PDF全文

Phillip E. Warwick  Ian W. Croudace  Richard M. Marsh  Nicolas Baglan  Sang Bog Kim 《Geostandards and Geoanalytical Research》2018,42(2):253-262

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.  相似文献   

Rutile R632 – A New Natural Reference Material for U‐Pb and Zr Determination          下载免费PDF全文

Emelie Axelsson  Jonas Pape  Jasper Berndt  Fernando Corfu  Klaus Mezger  Michael M. Raith 《Geostandards and Geoanalytical Research》2018,42(3):319-338

A new natural rutile reference material is presented, suitable for U‐Pb dating and Zr‐in‐rutile thermometry by microbeam methods. U‐Pb dating of rutile R632 using laser ablation ICP‐MS with both magnetic sector field and quadrupole instruments as well as isotope dilution‐thermal ionisation mass spectrometry yielded a concordia age of 496 ± 2 Ma. The high U content (> 300 μg g^?1) enabled measurement of high‐precision U‐Pb ages despite its young age. The sample was found to have a Zr content of 4294 ± 196 μg g^?1, which makes it an excellent complementary reference material for Zr‐in‐rutile thermometry. Individual rutile grains have homogeneous compositions of a number of other trace elements including V, Cr, Fe, Nb, Mo, Sn, Sb, Hf, Ta and W. This newly characterised material significantly expands the range of available rutile reference materials relevant for age and temperature determinations.  相似文献   

渝东北地区五峰组—龙马溪组页岩气地质特征及其勘探方向探讨   总被引：1，自引：0，他引：1  

熊小辉  王剑  熊国庆  汪正江  门玉澎  周小琳  周业鑫  杨潇  邓奇 《地质学报》2018,92(9):1948-1958

渝东北地区五峰组—龙马溪组暗色泥页岩沉积厚度介于30.92~164.47m之间,其中在朝阳镇咸池剖面及田坝一带厚度最大,往研究区东西两侧具有减薄的趋势。全区总有机碳含量平均3.32%,中部(平均3.93%)和西部(平均3.59%)相对东部(平均2.77%)具有更高的有机质丰度。有机质以I型腐泥型为主,西部个别剖面及东部栗子坪一带夹少量Ⅱ_1—Ⅱ_2型干酪根,其成熟度普遍处于高成熟—过成熟阶段,呈现自北向南升高的趋势。石英、脆性矿物含量普遍较高(尤其是中西部区块),黏土矿物较低,更易产生储气裂缝及利于后期压裂。储层特征方面,中部地区泥页岩具有更高的孔隙度和较低的渗透率,同时比表面积也相对更高,以有机质孔隙为主。中部区块田坝—朝阳—文峰一带含气性最好,结合页岩厚度、总有机碳含量分布、储层条件及构造保存条件分析,本区中部区块田坝—朝阳—文峰一带具有更好的页岩气勘探前景,是该区下一步勘探的重点区域。  相似文献   

准噶尔盆地东北部侏罗系砂岩型铀矿成矿环境与找矿方向探讨     

何中波  秦明宽  宋继叶  郭强  许强  刘章月  杨烨  黄少华 《矿床地质》2018,37(1):175-190

文章从蚀源区铀源条件、中新生代构造演化条件、侏罗系沉积建造特征及后生蚀变特征等角度分析了准噶尔盆地东北部砂岩型铀矿的区域成矿条件,认为卡拉麦里山的富铀花岗岩体为该区砂岩型铀成矿提供了丰富的铀源,中侏罗统含煤碎屑岩建造为砂岩型铀成矿提供了良好的容矿空间,侏罗纪以来多期次不整合面的发育为含铀含氧水的渗入改造提供了通道及时间,为大规模层间氧化带的发育提供了物质基础。研究结果显示,卡拉麦里山北坡为最有利的砂岩型铀矿找矿部位,其主要找矿目标层位为中侏罗统头屯河组,找矿类型为层间氧化带型。  相似文献