黑龙江乱泥沟金矿成矿条件与找矿方向   总被引：1，自引：0，他引：1  

张春晓  包杰  徐海文 《黄金地质》2004,10(3):39-43

乱泥沟矿区第四系砂金矿产丰富，是寻找岩金的有利靶区。区内出露的古元古代变质岩系地层的原岩为泥质粉砂岩和中基性海底火山岩，其Au含量高，是金矿成矿的初始矿源层。区内NE，NW向构造发育，所发现的矿体均受控于NW向断裂，呈脉和复脉状产于构造蚀变带及其次一级的层间破碎带中，成矿物质简单，矿体品位和厚度变化系数较小，为中—低温蚀变岩型金矿床。利用物化探测量手段，圈出具找矿意义的组合异常，通过工程查证发现金矿体。在综合研究矿区地质特征及物化探异常的基础上总结了找矿标志，并指出下一步有利的找矿区段。  相似文献   

云南省白竹箐-阳文山NE向构造带铅锌矿成矿地质条件及找矿方向     

牛文革  秦臻  李耀辉 《矿产与地质》2004,18(3):249-251

重点分析构造带的成矿地质条件，总结地层、构造、岩浆岩与矿床的关系，认为该地区具有寻找层控及热液改造型铅锌矿的远景，并指明找矿方向，根据化探异常及矿点分布的规律，圈定了找矿靶区。  相似文献   

山东龙口大顶金矿地质特征及找矿方向     

鄢全树  马衍峰  徐进 《矿产与地质》2004,18(1):22-25

重点介绍大顶金矿区的地质特征及区内主要矿脉体(36号矿脉群)特征，同时，对控矿因素作了一定的分析，初步总结了36号矿脉群在双顶矿段北东缘的成矿规律，指明了本矿区的找矿标志及下一步的找矿方向。  相似文献   

广西新型矿物材料发展方向初探     

李艺 《矿产与地质》2004,18(1):42-45

新材料是发展高新技术产业的基础。根据广西的矿产资源优势和在矿物材料方面的研究基础和技术力量，提出了加强工艺矿物学研究，大力发展广西新型矿物材料的研究开发方向，特别提出了超细改性矿物粉体材料、环保矿物材料、节能保温矿物材料、高技术陶瓷材料和合成矿物晶体材料等材料体系中的重点开发方向。  相似文献   

新疆西昆仑塔一卡铅-锌矿区成矿特征及找矿方向     

周志坚曾志钢  陈世平 《矿产与地质》2004,18(2):128-133

塔一卡铅-锌矿区成矿类型具典型的密西西比河谷型层控矿床特征，该矿区的主要含矿地层为下石炭统卡拉巴西塔克组第二岩性段(C1kl^2)白云质灰岩，通过对该矿区成矿特征及控矿条件的分析，指出西昆仑塔卡矿区铅-锌矿勘查的找矿方向。  相似文献   

西昌盆地油气化探普查效果及下一步找油气方向   总被引：1，自引：0，他引：1  

颜自给  樊建强  贾国相  赵友方  何政才 《矿产与地质》2004,18(4):335-338

为了配合国家加快油气资源勘查步伐，四川石油管理局将西昌盆地作为下一步勘探重点地区，由于西昌盆地属勘探新区，各种地质、构造情况复杂，首先在该区实施了油气化探普查，油气化探普查结果证实了西昌盆地中部地区为油气泄漏特征，这与七坝1井结果吻合，同时发现了三个重点区域，指出盆地西部为下一步工作的重点地区，为下一步地震勘探指明找油气方向。  相似文献   

Analysis of Sediments and Soils by X-Ray Fluorescence Spectrometry Using Matrix Corrections Based on Fundamental Parameters   总被引：2，自引：0，他引：2  

Jacinta Enzweiler  Maria Aparecida Vendemiatto 《Geostandards and Geoanalytical Research》2004,28(1):103-112

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) is widely used for the analysis of soils and sediments using well characterised procedures. However, difficulties can occur with samples such as unknowns containing small amounts of ore materials and samples collected from contaminated sites where trace elemental concentrations can exceed the concentration range for routine analysis. We studied the performance of a commercially available method, based on fundamental parameters (FP) to correct matrix effects. The spectrometer was originally calibrated with elemental or simple compound calibrants. Samples were analysed as pressed powder pellets. Eighteen sediment and soil reference materials, three of them with certified values for some of their constituents, were used to evaluate accuracy, by comparing results with recommended values and their standard deviations (RV ± 2s) or certified values and their confidence intervals (CV ± Cl). When results fell systematically outside these intervals, calibrations were refined with geochemical reference materials. The best agreement of results with recommended and certified values was obtained when the contents of H₂O and C in each sample were included as matrix constituents during calculations. The detection limits of trace elements tended to be relatively high, because the measuring conditions employed were not maximised for sensitivity. The main advantage of the method tested was that it enabled the analysis of samples with high concentrations of trace elements and the determination of elements such as F, Bi, Sb and W, which are not commonly included in quantitative XRF analysis of geological samples.  相似文献   

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials   总被引：6，自引：1，他引：6  

Jean Carignan  Damien Cardinal  Anton Eisenhauer  Albert Galy  Mark Rehkamper  Frank Wombacher  Nathalie Vigier 《Geostandards and Geoanalytical Research》2004,28(1):139-148

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.  相似文献   

Precise/ Small Sample Size Determinations of Lithium Isotopic Compositions of Geological Reference Materials and Modern Seawater by MC-ICP-MS   总被引：6，自引：1，他引：6  

Alistair B. Jeffcoate  Tim Elliott  Alex Thomas  Claudia Bouman 《Geostandards and Geoanalytical Research》2004,28(1):161-172

The Li isotope ratios of four international rock reference materials, USGS BHVO-2, GSJ JB-2, JG-2, JA-1 and modern seawater (Mediterranean, Pacific and North Atlantic) were determined using multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). These reference materials of natural samples were chosen to span a considerable range in Li isotope ratios and cover several different matrices in order to provide a useful benchmark for future studies. Our new analytical technique achieves significantly higher precision and reproducibility (< ± O.3%o 2s) than previous methods, with the additional advantage of requiring very low sample masses of ca . 2 ng of Li.  相似文献   

地热井常见主要问题分析与研究          下载免费PDF全文

卢予北 《探矿工程》2004,31(2):43-47

针对目前地热井施工技术现状及地热井使用中常见的问题，进行了较为详细的分析和研究，并就今后发展方向和建议进行了初步探讨。  相似文献