2-D deformation analysis of a half-space due to a long dip-slip fault at finite depth     

Sushil K. Tomar  Naresh K. Dhiman 《Journal of Earth System Science》2003,112(4):587-596

Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and depth of the upper edge of the fault. The effect of dip angle and depth of the upper edge of the fault on stresses and displacements is studied numerically and the results obtained are presented graphically. Contour maps for stresses and displacements are also presented. The results of Rani and Singh (1992b) and Freund and Barnett (1976) have been reproduced.  相似文献   

Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses   总被引：9，自引：0，他引：9  

Stephen M. Eggins 《Geostandards and Geoanalytical Research》2003,27(2):147-162

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.  相似文献   

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1     

William J. Chazey III  Clive R. Neal  Jinesh C. Jain  William S. Kinman 《Geostandards and Geoanalytical Research》2003,27(2):181-192

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).  相似文献   

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast   总被引：4，自引：0，他引：4  

H. A. Abd-Elmotaal  N. Kühtreiber 《Journal of Geodesy》2003,77(1-2):77-85

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal  相似文献   

国家地理空间信息基准框架工程建设     

张燕平  张全德  张江齐  岳建利 《武汉大学学报(信息科学版)》2003,(Z1)

提出了国家地理空间信息基准框架内改进与更新原有的大地坐标基准、高程基准和重力基准的建设道路及解决原则。  相似文献   

Web环境下SVG地图浏览器的设计与实现   总被引：8，自引：0，他引：8  

周文生胡鹏  贾永红 《测绘学院学报》2003,20(2):135-138,141

SVG是近年来发展起来的基于XML的用于描述矢量图形、图像的标准规范，该规范的制定对网上矢量地图数据的共享具有十分重要的意义，基于SVG的矢量地图十分有利于地理空间数据的传播。文中首先分析了目前Web环境下矢量地图发布存在的问题，之后介绍了SVG的有关情况，最后基于Adobe的SVG Vie—wer2．0设计并实现了一个SVG地图浏览器，着重研究了3个问题，即矢量地图数据在SVG文档中的组织与编码，地图浏览器界面的设计以及若干地图操作功能的实现。  相似文献   

电子地图集的自动分幅设计与实现   总被引：1，自引：0，他引：1  

刘芳 《测绘学院学报》2003,20(2):148-150

分幅地图是电子地图集设计中的一个主要问题。根据电子地图集的特点，提出了电子地图集自动分幅设计的基本原则和方法，并在VC 环境下实现了基于MapX控件的电子地图集自动分幅。  相似文献   

车辆导航系统中定位数据处理和地图匹配技术   总被引：11，自引：1，他引：11  

许志海张昭云  陈应东 《测绘学院学报》2003,20(4):247-250

分析了GPS误差来源，并提出了相应的处理办法；融合电子地图中的道路数据和GPS所提供的定位数据的地图匹配算法，可以有效地提高车辆导航的定位精度。在分析各种地图匹配算法基础上，提出了一种实用的地图匹配方法，并且在实践中得到了验证。  相似文献   

高斯平面坐标换算到测区平均高程面上的方法   总被引：5，自引：2，他引：5  

鲍建宽 《测绘工程》1997,6(3):46-49,55

依据高斯投影原理，提出了一种在高斯平面与任决高程平面间进行坐标转换的方法，并设计了相应的计算软件。  相似文献   

地图数学定义的研究     

钟业勋  李占元 《武汉大学学报(信息科学版)》1997,(2)

在地图内容和形式数学表示的基础上研究了地图的数学定义。由于引入隐式地图和变换条件，故所有储存地图信息的载体均可属于地图的范围，从而使地图定义获得了广义的解释和精确的表达  相似文献