The petroleum generation potential and effective oil window of humic coals related to coal composition and age   总被引：1，自引：0，他引：1  

Henrik I. Petersen   《International Journal of Coal Geology》2006,67(4):221-248

A worldwide data set of more than 500 humic coals from the major coal-forming geological periods has been used to analyse the evolution in the remaining (Hydrogen Index, HI) and total (Quality Index, QI) generation potentials with increasing thermal maturity and the ‘effective oil window’ (‘oil expulsion window’). All samples describe HI and QI bands that are broad at low maturities and that gradually narrow with increasing maturity. The oil generation potential is completely exhausted at a vitrinite reflectance of 2.0–2.2%R_o or T_max of 500–510 °C. The initial large variation in the generation potential is related to the original depositional conditions, particularly the degree of marine influence and the formation of hydrogen-enriched vitrinite, as suggested by increased sulphur and hydrogen contents. During initial thermal maturation the HI increases to a maximum value, HI_max. Similarly, QI increases to a maximum value, QI_max. This increase in HI and QI is related to the formation of an additional generation potential in the coal structure. The decline in QI with further maturation is indicating onset of initial oil expulsion, which precedes efficient expulsion. Liquid petroleum generation from humic coals is thus a complex, three-phase process: (i) onset of petroleum generation, (ii) petroleum build-up in the coal, and (iii) initial oil expulsion followed by efficient oil expulsion (corresponding to the effective oil window). Efficient oil expulsion is indicated by a decline in the Bitumen Index (BI) when plotted against vitrinite reflectance or T_max. This means that in humic coals the vitrinite reflectance or T_max values at which onset of petroleum generation occurs cannot be used to establish the start of the effective oil window. The start of the effective oil window occurs within the vitrinite reflectance range 0.85–1.05%R_o or T_max range 440–455 °C and the oil window extends to 1.5–2.0%R_o or 470–510 °C. For general use, an effective oil window is proposed to occur from 0.85 to 1.7%R_o or from 440 to 490 °C. Specific ranges for HI_max and the effective oil window can be defined for Cenozoic, Jurassic, Permian, and Carboniferous coals. Cenozoic coals reach the highest HI_max values (220–370 mg HC/g TOC), and for the most oil-prone Cenozoic coals the effective oil window may possibly range from 0.65 to 2.0%R_o or 430 to 510 °C. In contrast, the most oil-prone Jurassic, Permian and Carboniferous coals reach the expulsion threshold at a vitrinite reflectance of 0.85–0.9%R_o or T_max of 440–445 °C.  相似文献   

等截面单桩抗拔承载性状试验研究     

王之军  管志新  刘建平  吴喜江 《探矿工程》2006,33(4):1-4

在基坑中对等截面单桩进行了抗拔静载试验，在桩身设置应变式钢筋计，成功测得桩身各截面的应变数据。分析试验所得数据，对试验抗拔桩抗拔系数的取值、侧摩阻力的发挥、混凝土桩身的开裂等进行了探讨，相应给出了抗拔桩的设计建议。  相似文献   

Centrifuge modelling-based verification of response spectra design methods for some vulnerable structures     

S. P. G. Madabhushi  C. H. Lawson 《Geotechnical and Geological Engineering》2006,24(4):793-808

Residential RC framed structures suffered heavily during the 2001 Bhuj earthquake in Gujarat, India. These types of structures also saw severe damage in other earthquakes such as the 1999 Kocaeli earthquake in Turkey and 921 Ji-Ji earthquake in Taiwan. In this paper the seismic response of residential structures was investigated using physical modelling. Idealised soft storey and top heavy, two degrees of freedom (2DOF) portal frame structures were developed and tested on saturated and dry sand models at 25 g using the Schofield Centre 10-m Beam Centrifuge. It was possible to recreate observed field behaviour using these models. As observed in many of the recent earthquakes, soft storey structures were found to be particularly vulnerable to seismic loads. Elastic response spectra methods are often used in the design of simple portal frame structures. The seismic risk of these structures can be significantly increased due to modifications such as removal of a column or addition of heavy water tanks on the roof. The experimental data from the dynamic centrifuge tests on such soft storey or top-heavy models was used to evaluate the predictions obtained from the response spectra. Response spectra were able to predict seismic response during small to moderate intensity earthquakes, but became inaccurate during strong earthquakes and when soil structure interaction effects became important. Re-evaluation of seismic risk of such modified structures is required and time domain analyses suggested by building codes such as IBC, UBC or NEHRP may be more appropriate.  相似文献   

纹理映射失真处理中的LOD技术     

王菲  卢晨琰夏青 游雄 《测绘学院学报》2005,22(4):304-306

纹理映射是计算机图形学中广泛应用的一项重要技术,纹理图像可以描述景物表面各点处的反射属性,模拟景物表面丰富的纹理细节,减少建模的工作量,提高计算机生成图形的真实性.但是由于纹理都为栅格图像,放大和缩小会产生一定程度的失真,所以要对纹理进行细节分层处理.文中主要介绍纹理的重采样和建立金字塔技术,提出减少纹理映射失真的方法.  相似文献   

红旗岭镁铁-超镁铁岩侵入体及铜镍硫化物矿床的成岩成矿机制   总被引：7，自引：0，他引：7  

杨言辰  孙德有  马志红  许文良 《吉林大学学报(地球科学版)》2005,35(5):593-600

红旗岭铜镍矿床地处华北地台与吉黑地槽系接触带--辉发河断裂北侧.区内出露30多个镁铁-超镁铁质岩体,其中1、7号超镁铁岩体中赋存铜镍硫化物矿(床)体.含矿岩体分相明显,各类岩石均具堆积结构.铜镍矿体呈似板状、脉状、透镜状及囊状赋存于超镁铁岩体底部橄榄辉岩相中.岩石学和地球化学研究表明,7号岩体形成以流动分异为主,1号岩体为重力分异;原始岩浆属拉斑玄武质,块状矿石系压滤作用产物,后续岩浆的补给和混合补充了成矿物质,硫化物不混溶程度受挥发分制约,矿床属岩浆深部熔离分异成因,成矿时代为印支期.  相似文献   

应用航磁数据分维计算推断火成岩的分布   总被引：2，自引：0，他引：2  

吴小羊  潘佳铁 《物探与化探》2005,29(4):291-294

计算巴彦浩特盆地航磁异常的分维数, 对计算出的分维数绘制等值线图, 并根据分形特征对该地区的火成岩进行划分, 得到了以往直接对航磁异常图进行推断解释所不能得到的良好地质效果。最后讨论如何选取最佳窗口和最佳网格来计算分维数, 并对此提出了2个经验。  相似文献   

单一滑面边坡的非稳定蠕变模型分析   总被引：3，自引：0，他引：3  

何峰  王来贵  刘向峰 《中国地质灾害与防治学报》2005,16(4):29-31

对单一滑面边坡的非稳定蠕变分析是边坡稳定性研究的基础。文中对岩质边坡单一滑面的流变变形机制进行了分析，提出了一种能较好反映这一变形机制的非稳定蠕变模型。特别是描述单一滑面边坡的非稳定蠕变破坏阶段，并对其稳定性进行了讨论。结合一些工程实例进行了对比验证，为滑坡灾害的预测和防治提供依据。  相似文献   

基于车载序列影像的建筑立面纹理的快速重建   总被引：5，自引：0，他引：5  

康志忠  张祖勋  张剑清 《武汉大学学报(信息科学版)》2005,30(11):960-964

提出了一种基于车载序列影像的建筑立面纹理快速重建的方法。首先进行影像预处理,包括畸变差改正、树木遮挡去除等,然后对影像进行自动纠正,在此基础上,自动选择拼接点对影像进行拼接。实验证明了本文方法的有效性。  相似文献   

准噶尔盆地西北缘侏罗系储层   总被引：13，自引：5，他引：13       下载免费PDF全文

庄锡进  胡宗全  朱筱敏 《古地理学报》2002,4(1):90-96

准噶尔盆地西北缘侏罗系陆相碎屑岩储层的岩性差异较大，岩性对物性的控制作用明显。储层的孔隙类型多样，不同类型的孔隙在发育规模、丰度及有效性方面都存在显差异，次生溶蚀孔隙、原生粒间孔隙和残余粒间孔隙是最重要的有效孔隙类型。储层渗透率与孔隙度之间存在较好的半对数相关关系。通过设置一定的孔隙度和渗透率参数界线，对储层储集性能进行评价，将侏罗系储层的孔渗性能划分为5个级别，可与当前流行的砂岩储层孔渗性能分级相对应。通过对大量压汞参数样本的聚类分析，将储层的孔隙结构划分为4个类型。通过各类参数统计及曲线形态对比，对孔隙结构类型进行了定量结合定性的优劣评价。最后，结合孔渗性能级别、储集空间类型、孔隙结构类型、岩性等特征，对准噶尔盆地西北缘侏罗系储层进行了综合分类评价。  相似文献   

利用ERS-2 SAR图像纹理分析方法揭示长白山天池火山近代喷发物空间分布特征   总被引：4，自引：0，他引：4       下载免费PDF全文

单新建  叶洪  陈国光 《第四纪研究》2002,22(2):123-130

简单介绍了SAR图像的纹理特征以及正交小波变换纹理提取方法。论述了SAR图像的纹理特征参与分类的重要性。以长白山天池火山为例,通过对ERS2SAR图像进行纹理分析,提取了SAR图像两个层次的尺度变化、时频局部化和方向性纹理特征。并将SAR纹理特征与TM图像及DEM进行复合,利用多源信息各自的优势,进行了BP神经元网络分类,从较大范围对长白山天池火山735±15aB.P.大喷发的喷发物空间分布进行评价。获取了长白山天池火山近代喷发物的空间分布及规模。这对长白山天池火山未来喷发危险性初步评价、火山地质制图及火山灾害预测有重要意义。  相似文献