We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.
We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.
The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.
ZS9 is made out of 36 zones where earthquakes with Mw > = 5 are expected. It also assumes that earthquakes with Mw up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.
Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates. 相似文献
The imbalance between incoming and outgoing salt causes salinization of soils and sub-soils that result in increasing the
salinity of stream-flows and agriculture land. This salinization is a serious environmental hazard particularly in semi-arid
and arid lands. In order to estimate the magnitude of the hazard posed by salinity, it is important to understand and identify
the processes that control salt movement from the soil surface through the root zone to the ground water and stream flows.
In the present study, Malaprabha sub-basin (up to dam site) has been selected which has two distinct climatic zones, sub-humid
(upstream of Khanapur) and semi-arid region (downstream of Khanapur). In the upstream, both surface and ground waters are
used for irrigation, whereas in the downstream mostly groundwater is used. Both soils and ground waters are more saline in
downstream parts of the study area. In this study we characterized the soil salinity and groundwater quality in both areas.
An attempt is also made to model the distribution of potassium concentration in the soil profile in response to varying irrigation
conditions using the SWIM (Soil-Water Infiltration and Movement) model. Fair agreement was obtained between predicted and
measured results indicating the applicability of the model. 相似文献
This paper presents the results of a comparative study relating to the application of four vulnerability mapping methods,
GOD, AVI, DRASTIC and SINTACS, in a pilot detritic aquifer situated in NW Morocco, known as the Martil–Alila aquifer. The
principal objective of this work is to determine the most suitable such methods for this aquifer type within a Mediterranean
context, and to show the effect of the rainfall variations that are characteristic of the Mediterranean climate on the degree
of vulnerability. The methods applied distinguish five classes of vulnerability, these being irregularly divided up in space,
with the division varying according to the method in question. The vulnerability maps obtained by the different methods strongly
suggest that the eastern half of the aquifer is more vulnerable to contamination than the western half, for all hydrological
situations. The effect of climatic conditions on the degree of vulnerability is well represented by the DRASTIC, according
to which the aquifer is moderately to strongly vulnerable during humid hydrological years and weakly to moderately vulnerable
during dry ones. For the other methods, this climatic effect is limited to the area occupied by the two predominant classes
(“High” and “Low” for GOD and “High” and “Moderate” for SINTACS) while it is null for AVI. In conclusion, DRASTIC appears
the most suitable for mapping the vulnerability to contamination of Mediterranean coastal detritic aquifers such as the Martil–Alila
aquifer. 相似文献
MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because
of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for
water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing
with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and
domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development
of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology.
Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing
of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship
between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater
flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater
resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water
budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December
2003. During this period, the total recharge of the groundwater system was 49,374 × 106 m3 and the total discharge was 56,530 × 106 m3 the budget deficit was −7,156 × 106 m3. In this integrated system, the original data including graphs and attribution data could be stored in the database. When
the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core
program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online. 相似文献
In the geological record, hummocky dead-ice moraines represent the final product of the melt-out of dead-ice. Processes and rates of dead-ice melting in ice-cored moraines and at debris-covered glaciers are commonly believed to be governed by climate and debris-cover properties. Here, backwasting rates from 14 dead-ice areas are assessed in relation to mean annual air temperature, mean summer air temperature, mean annual precipitation, mean summer precipitation, and annual sum of positive degree days. The highest correlation was found between backwasting rate and mean annual air temperature. However, the correlation between melt rates and climate parameters is low, stressing that processes and topography play a major role in governing the rates of backwasting. The rates of backwasting from modern glacial environments should serve as input to de-icing models for ancient dead-ice areas in order to assess the mode and duration of deposition.A challenge for future explorations of dead-ice environments is to obtain long-term records of field-based monitoring of melt progression. Furthermore, many modern satellite-borne sensors have high potentials for recordings of multi-temporal Digital Elevation Models (DEMs) for detection and quantification of changes in dead-ice environments. In recent years, high-accuracy DEMs from airborne laser scanning altimetry (LiDAR) are emerging as an additional data source. However, time series of high-resolution aerial photographs remain essential for both visual inspection and high-resolution stereographic DEM production. 相似文献
Flood mapping requires the combination and integration of geomorphological and hydrological-hydraulic methods; however, despite
this, there is very little scientific literature that compares and validates both methods. Two types of analysis are addressed
in the present article. On the one hand, maps of flood plains have been elaborated using geomorphological evidence and historical
flood data in the mountainous area of northwestern Spain, covering an area of more then 232 km2 of floodplains. On the other hand, a hydrometeorological model has been developed (Clark semidistributed unit hydrograph)
in the Sarria River basin (155 km2, NW Spain). This basin is not gauged, hence the model was subjected to a goodness-of-fit test of its parameter (curve number)
by means of Monte Carlo simulation. The peak flows obtained by means of the hydrological model were used for hydraulic modeling
(one-phase, one-dimensional and steady flow) in a 4 km2 urban stretch of the river bed. The delineation of surface areas affected by floods since 1918, as well as those analyzed
subsequent to the geomorphological study, reveals a high degree of reliability in the delineation of the flooded areas with
frequent recurrence intervals (<50 years). If we compare these flooded surface areas with the estimate obtained by the hydrological-hydraulic
method we can see that the latter method overestimates the extent of the surface water by 144% for very frequent recurrence
intervals (>10 years) and underestimates it as the recurrence interval increases, by up to 80% less floodplain for exceptional
events (>500 years). Finally, a management map is put forth combining the most reliable results available by integrating both
methods.
Originally presented at the Sixth International Conference on Geomorphology. 相似文献