Efficient DEM‐based overland flow routing using integrated recursive algorithms          下载免费PDF全文

Pin‐Chun Huang  Kwan Tun Lee 《水文研究》2017,31(5):1007-1017

Two primary concerns in performing watershed overland flow routing are the numerical instability and computational efficiency. The stability of executing an explicit scheme has to be maintained by observing the Courant–Friedrich–Lewy criterion, which is adopted to confirm that the numerical marching speed is larger than the wave celerity. Moreover, there is another criterion of time step devised in previous studies to avoid back‐and‐forth refluxing between adjacent grids. The situation of refluxing usually occurs on flat regions. In light of this, the selection of a small time increment to honor both restrictions simultaneously is believed to decrease the computational efficiency in performing overland flow routing. This study aims at creating a robust algorithm to relax both restrictions. The proposed algorithm was first implemented on a one‐dimensional overland plane to evaluate the accuracy of the numerical result by comparing it with an analytical solution. Then, the algorithm was further applied to a watershed for 2D runoff simulations. The results show that the proposed integrated algorithm can provide an accurate runoff simulation and achieve satisfactory performance in terms of computational speed.  相似文献   

Application of the numerical manifold method for stress wave propagation across rock masses     

G. F. Zhao  X. B. Zhao  J. B. Zhu 《国际地质力学数值与分析法杂志》2014,38(1):92-110

In this paper, the numerical manifold method (NMM) is extended to study wave propagation across rock masses. First, improvements to the system equations, contact treatment, and boundary conditions of the NMM are performed, where new system equations are derived based on the Newmark assumption of the space–time relationship, the edge‐to‐edge contact treatment is further developed for the NMM to handle stress wave propagation across discontinuities, and the viscous non‐reflection boundary condition is derived based on the energy minimisation principle. After the modification, numerical comparisons between the original and improved NMM are presented. The results show that the original system equations result in artificial numerical damping, which can be overcome by the Newmark system equations. Meanwhile, the original contact scheme suffers some calculation problems when modelling stress wave propagation across a discontinuity, which can be solved by the proposed edge‐to‐edge contact scheme. Subsequently, the influence of the mesh size and time step on the improved NMM for stress wave propagation is studied. Finally, 2D wave propagation is modelled, and the model's results are in good agreement with the analytical solution. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Impact of the North Atlantic Oscillation on streamflow in Western Iran          下载免费PDF全文

Hossein Tabari  Hirad Abghari  Parisa Hosseinzadeh Talaee 《水文研究》2014,28(15):4411-4418

The Middle East region, where arid and semi‐arid regions occupy most of the land, is extremely vulnerable to any natural or anthropogenic reductions in available water resources. Much of the observed interannual‐decadal variability in Middle Eastern streamflow is physically linked to a large‐scale atmospheric circulation patterns such as the North Atlantic Oscillation (NAO). In this work, the relationship between the NAO index and the seasonal and annual streamflows in the west of Iran was statistically examined during the last four decades. The correlations were constructed for two scenarios (with and without time lag). The associations between the annual and seasonal streamflows and the simultaneous NAO index were found to be poor and insignificant. The possibility of streamflow forecasting was also explored, and the results of lag correlations revealed that streamflow responses at the NAO signal with two and three seasons delays. The highest Spearman correlation coefficient of 0.379 was found between the spring NAO index and the autumn streamflow series at Taghsimab station, indicating that roughly 14% of the variance in the streamflow series is associated with NAO forcing. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Analysis of shaft resistance of jacked piles in sands     

Rodrigo Salgado 《国际地质力学数值与分析法杂志》2011,35(15):1605-1635

In recent years, pile jacking has become a viable alternative installation method for displacement piles. Pile jacking produces minimal noise, vibration and air pollution during installation. In addition, it is possible, at the end of jacking, to have a good estimate of the ultimate static capacity of the pile. In this paper, the shaft resistance of piles jacked into sand is studied using one‐dimensional finite element analysis. The finite element simulations, using a two‐surface plasticity model, demonstrate the effects of relative density and confinement on the unit shaft resistance of piles jacked in sand. The impact of the number of jacking strokes on the unit shaft capacity is also assessed. Based on the numerical results, we developed equations for shaft resistance quantifying the effects of relative density, initial confinement and number of jacking strokes. Predictions using these equations are compared with data obtained from centrifuge tests and field tests. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Borehole failure analysis in a sandstone under anisotropic stresses     

Euripides Papamichos 《国际地质力学数值与分析法杂志》2010,34(6):581-603

Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Review and enhancement of 3D concrete models for large‐scale numerical simulations of concrete structures     

B. Valentini  G. Hofstetter 《国际地质力学数值与分析法杂志》2013,37(3):221-246

The present paper focuses on selected plasticity and damage‐plasticity models for describing the 3D material behavior of concrete. In particular, a plasticity model and a damage‐plasticity model are reviewed and evaluated. Based on the results of the evaluation, enhancements are proposed, aiming at improving the correspondence between predicted and observed material behavior and aiming at implementing a robust and efficient stress update algorithm in a finite element program for performing large‐scale 3D numerical simulations of concrete structures. The capabilities of the concrete models are demonstrated by 3D numerical simulations of benchmark tests with combined bending and torsional loading and combined compression and shear loading and by a large‐scale 3D finite element analysis of a model test of a concrete arch dam. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

基于Matlab的GPS网间接平差教学设计与实现     

陶秋香  翟敏 《测绘与空间地理信息》2016,(3):9-12

GPS网间接平差是测绘类本科专业误差理论与测量平差基础教学的重要组成部分。本文针对GPS网间接平差存在的观测数据多、计算量大、在实际课堂教学中很难讲解清楚等问题,提出基于Matlab的GPS网间接平差教学设计与实现方法。给出GPS网间接平差课堂教学的内容及难点,阐述基于Matlab的GPS网间接平差程序设计流程及关键步骤的实现方法。结合3个具体的GPS网平差实例,展示程序运行的结果。结果表明,基于Matlab进行GPS网间接平差教学既有助于加深学生对GPS网间接平差理论知识的理解,培养学生理论联系实际的能力,又可以实现学生所学计算机高级编程语言与专业知识的有机结合,提高学生的编程能力和学习兴趣。  相似文献   

测斜技术原理与作业要点探讨     

侯金波  李更召  陈潇  朱俊鹏 《测绘与空间地理信息》2016,(6)

深层水平位移监测(即测斜)能直接反映土体或支护结构的变形特征,是高风险建筑基坑工程安全的重要保证。本文对测斜技术原理进行了阐述,并根据工程实践经验对测斜监测的作业要点进行了探讨与总结。  相似文献   

地面三维激光扫描仪测量误差检定     

代志宇  肖昭然  王力  杨文峰 《测绘与空间地理信息》2016,(7):79-81

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。  相似文献   

基于NGM(1,1,k,c)模型和改进切线角的危岩变形预测     

刘富有  陈鹏宇  余宏明 《测绘与空间地理信息》2016,(6):8-10

针对危岩变形预测问题,本文以非齐次指数序列的灰色模型(NGM)作为危岩变形预测的基本模型,通过对望霞危岩变形的分析结果显示,NGM(1,1,k,c)模型拟合效果明显优于GM(1,1)模型,说明危岩变形趋势更接近于非齐次指数序列。利用NGM(1,1,k,c)模型结合改进切线角可对危岩变形趋势进行分析预测,可作为危岩稳定性和发展趋势的评估依据。  相似文献