用C#.Net实现软件系统的动态更新     

刘才铭  李旭伟  朱宏  张雁 《成都信息工程学院学报》2005,20(3):313-318

为了便于大型软件系统的后续开发和用户软件系统的升级，介绍了软件系统在Internet/Intranet上更新功能或数据的原理和方法，并用C#．Net进行了编程实现。  相似文献   

西秦岭温泉花岗岩体岩石学特征及岩浆混合标志   总被引：14，自引：5，他引：9  

李永军  李注苍  丁仨平  刘志武  李民贤  李金宝 《地球科学与环境学报》2004,26(3):7-12

温泉花岗岩体由酸性端元的寄主岩石和暗色微细粒镁铁质包体群及基性岩墙群组成。无岩浆混合作用或岩浆混合作用较弱区段，寄主岩石以似斑状二长花岗岩为主．显示正常的花岗岩结构构造岩浆混合作用强烈区段。岩石的异常结构构造十分发育．矿物之间自形程度差异显著．常见包晶反应、包含结构、交代边、熔蚀边、交代蚕食的港湾状结构构造及交代缝合线、矿物镶边、斜长石异常环带和矿物残留等，多见指示岩浆混合的标志性矿物针状磷灰石。暗色微粒包体中多见寄主二长花岗岩中的捕掳晶。包体的形态、结构构造以及与寄主岩石强烈地成分交换等均是岩浆混合作用的标志。  相似文献   

地壳对海洋潮汐的响应   总被引：2，自引：2，他引：0  

郑文衡  王乘  何振  牛安福 《大地测量与地球动力学》2002,22(2):41-46

应用三维动态有限元方法研究了中国北部地区的地壳对邻近的渤海与黄海海平面变化的响应。虽然此应力场过于微弱不足以引发地震，但发现应力集中的位置及应力场变化较大的位置恰好与某些现代地震的震中一致。这一结果表明研究地壳对广泛分布的载荷的响应对研究区域地震构造是有帮助的。  相似文献   

MATLAB在运用系统建模处理南海气象数据过程中应用     

董言治  周晓东  娄树理  陈永刚  沈同圣 《成都信息工程学院学报》2004,19(1):76-81

介绍了MATLAB语言特点和系统建模方法的基本理论.根据南海气象数据的实际建模处理过程,给出了建模的详细步骤及其MATLAB实现过程以及MATLABTM的主要实现程序.试验讨论和结果表明利用MATLAB语言可以方便地对南海气象数据用系统建模方法进行建模和处理,MATLAB在运用系统建模法处理南海气象数据方面具有明显的优越性.  相似文献   

基于噪声随机模型的加权观测融合方法     

黄贤源  隋立芬  范玉茹 《测绘学院学报》2009,(1)

信息融合技术中,在各局部传感器的有色观测噪声为一阶AR模型的情况下,可以利用观测扩增方法消除有色噪声的影响,得到最优加权观测融合方程,从而实现状态的最优滤波解。对于有色观测噪声为MA或ARMA模型的情况,观测扩增方法不再适用。提出了基于有色观测噪声随机模型级数展开的方法,求解出各局部传感器有色观测噪声的方差,并利用该方差对加权观测融合滤波器进行了构造。通过计算实例证明,该方法不仅适用于观测噪声为AR模型,同时适用于噪声MA或ARMA模型。  相似文献   

局部大地水准面精化系统软件的设计与实现     

田晋 《武汉大学学报(信息科学版)》2009,34(1)

给出了局部大地水准面精化系统的总体结构以及各分系统的详细设计与实现方法,开发了旨在对相关重力测量数据实现自动化处理的局部大地水准面精化系统工具软件,并应用于某区域实际大地水准面的精确计算。实践证明,该系统能有效提高相关数据的处理效率,有助于局部大地水准面精化过程的规范化。  相似文献   

Calibrating the GOCE accelerations with star sensor data and a global gravity field model   总被引：1，自引：0，他引：1  

Sietse Rispens  Johannes Bouman 《Journal of Geodesy》2009,83(8):737-749

A reliable and accurate gradiometer calibration is essential for the scientific return of the gravity field and steady-state ocean circulation explorer (GOCE) mission. This paper describes a new method for external calibration of the GOCE gradiometer accelerations. A global gravity field model in combination with star sensor quaternions is used to compute reference differential accelerations, which may be used to estimate various combinations of gradiometer scale factors, internal gradiometer misalignments and misalignments between star sensor and gradiometer. In many aspects, the new method is complementary to the GOCE in-flight calibration. In contrast to the in-flight calibration, which requires a satellite-shaking phase, the new method uses data from the nominal measurement phases. The results of a simulation study show that gradiometer scale factors can be estimated on a weekly basis with accuracies better than 2 × 10⁻³ for the ultrasensitive and 10⁻² for the less sensitive axes, which is compatible with the requirements of the gravity gradient error. Based on a 58-day data set, scale factors are found that can reduce the errors of the in-flight-calibrated measurements. The elements of the complete inverse calibration matrix, representing both the internal gradiometer misalignments and scale factors, can be estimated with accuracies in general better than 10⁻³.  相似文献   

基于SAR干涉点目标分析技术的城市地表形变监测   总被引：1，自引：0，他引：1  

张永红  张继贤  龚文瑜  LU Z 《测绘学报》2009,38(6)

通过深入研究干涉点目标的相位模型,提出基于空间搜索的邻近点目标干涉相位差解缠方法,用以计算点目标的地形残差和线性形变,以及分离点目标大气延迟相位和非线性形变相位的时空域滤波方法,解决干涉点目标分析中的关键问题.最后,以苏州地区地表沉降监测为应用试验,利用形成的SAR干涉点目标形变信息提取技术,获取苏州市区1992-2002年间的地表沉降信息.研究结果与已有文献记录保持比较好的一致性,证明SAR干涉点目标技术完全可以发展成为应用于城市地表形变监测的实用化技术.

Abstract：

Interferometric point target analysis (IPTA) is one of the latest developments in radar interferometric processing. It is achieved by analysis of the interferometric phases of some individual point targets, which are discrete and present temporarily stable backscattering characteristics, in long temporal series of interferometric SAR images. This paper analyzes the interferometric phase model of point targets, and then addresses two key issues within IPTA process. Firstly, a spatial searching method is proposed to unwrap the interferometric phase difference between two neighboring point targets. The height residual error and linear deformation rate of each point target can then be calculated, when a global reference point with known height correction and deformation history is chosen. Secondly, a spatial-temporal filtering scheme is proposed to further separate the atmosphere phase and nonlinear deformation phase from the residual interferometric phase. Finally, an experiment of the developed IPTA methodology is conducted over Suzhou urban area. Totally 38 ERS-1/2 SAR scenes are analyzed, and the deformation information over 3 546 point targets in the time span of 1992-2002 are generated. The IPTA-derivecl deformation shows very good agreement with the published result, which demonstrates that the IPTA technique can be developed into an operational tool to map the ground subsidence over urban area.  相似文献   

Pressure-induced incipient amorphization of α-quartz and transition to coesite in an eclogite from Antarctica: a first record and some consequences     

R. PALMERI  M. L. FREZZOTTI  G. GODARD  R. J. DAVIES 《Journal of Metamorphic Geology》2009,27(9):685-705

Monocrystalline quartz inclusions in garnet and omphacite from various eclogite samples from the Lanterman Range (Northern Victoria Land, Antarctica) have been investigated by cathodoluminescence (CL), Raman spectroscopy and imaging, and in situ X‐ray (XR) microdiffraction using the synchrotron. A few inclusions, with a clear‐to‐opalescent lustre, show ‘anomalous’ Raman spectra characterized by weak α‐quartz modes, the broadening of the main α‐quartz peak at 465 cm^?1, and additional vibrations at 480–485, 520–523 and 608 cm^?1. CL and Raman imaging indicate that this ‘anomalous’α‐quartz occurs as relicts within ordinary α‐quartz, and that it was preserved in the internal parts of small quartz inclusions. XR diffraction circular patterns display irregular and broad α‐quartz spots, some of which show an anomalous d‐spacing tightening of ～2%. They also show some very weak, hazy clouds that have d‐spacing compatible with coesite but not with α‐quartz. Raman spectrometry and XR microdiffraction characterize the anomalies with respect to α‐quartz as (i) a pressure‐induced disordering and incipient amorphization, mainly revealed by the 480–485 and 608‐cm^?1 Raman bands, together with (ii) a lattice densification, evidenced by d‐spacing tightening; (iii) the cryptic development of coesite, 520–523 cm^?1 being the main Raman peak of coesite and (iv) Brazil micro‐twinning. This ‘anomalous’α‐quartz represents the first example of pressure‐induced incipient amorphization of a metastable phase in a crustal rock. This issue is really surprising because pressure‐induced amorphization of metastable α‐quartz, observed in impactites and known to occur between 15 and 32 GPa during ultrahigh‐pressure (UHP) experiments at room temperature, is in principle irrelevant under normal geological P–T conditions. A shock (due to a seism?) or a local overpressure at the inclusion scale (due to expansion mismatch between quartz and its host mineral) seem the only geological mechanisms that can produce such incipient amorphization in crustal rocks. This discovery throws new light on the modality of the quartz‐coesite transition and on the pressure regimes (non‐lithostatic v. lithostatic) during high‐pressure/UHP metamorphism. In particular, incipient amorphization of quartz could favour the quartz‐coesite transition, or allow the growth of metastable coesite, as already experimentally observed.  相似文献   

Optimal deflection of NEOs en route of collision with the Earth   总被引：1，自引：0，他引：1  

Ralph Kahle  Gerhard Hahn 《Icarus》2006,182(2):482-488

Recently, a method for the n-body analysis of the velocity change required to deflect a hazardous near-Earth object (NEO) was presented by Carusi et al. [Carusi, A., Valsecchi, G.B., D'Abramo, G., Boattini A., 2002. Icarus 159, 417-422]. We extent this method in order to optimize the velocity change vector instead of its along-track magnitude. From an application of both methods to a fictitious NEO we find Carusi's parallel approach to be reasonable for phases of unperturbed two-body motion. But, for orbit phases inhering third-body perturbations, i.e., for planetary close approaches or prior to a collision, the results obtained from the new method show the radial component of deflection impulse to play a major role. We show that a fivefold greater efficiency can be achieved by a deflection impulse being non-parallel to orbital velocity. The new method is applied to two possible 99942 Apophis impact trajectories in order to provide constraints for future Apophis deflection mission analysis.  相似文献