盘南响水矿井船形构造特征及其对煤层开采的影响     

杨通保 《中国煤炭地质》2008,20(4):1-3

盘南响水井田播土采区内北西向断层成组出现,倾向相对,地面大致平行或呈透镜状延伸,深部相交消失,空间形态组合类似船体形状。通过对船形构造内的断层组合及成因分析,认为该船形构造属挽近地质历史时期形成的重力滑动构造,其两侧利用和追踪了先期形成的北西向断层,主滑面主要沿煤系地层中部的17、19煤层等软弱层发育。根据船形构造发育特点,分析了各个船形构造对煤系地层及煤层的切割破坏程度,为矿井生产中的构造预测提供了依据。  相似文献   

Reflection of waves from the boundary of a random elastic semi-infinite medium     

Rabindra Kumar Bhattacharyya 《Pure and Applied Geophysics》1996,146(3-4):677-688

In this paper the smooth perturbation technique is employed to investigate the problem of reflection of waves incident on the plane boundary of a semi-infinite elastic medium with randomly varying inhomogeneities. Amplitude ratios have been obtained for various types of incident and reflected waves. It has been shown that an incidentSH orSV type of wave gives rise to reflectedSH, P andSV waves, the main components beingSH andP, SV in the respective cases. The reflected amplitudes have been calculated depending upon the randomness of the medium to the square of the small quantity , where measures the deviation of the medium from homogeneity. An incidentP-type wave produces mainly aP component and also a weakSH component to the order of ². The reflected amplitudes obtainable for elastic media are also altered by terms of the same order. The direction of the reflected wave is influenced by randomness in some cases.  相似文献   

Hybrid seismic modeling based on discrete-wave number and finite-difference methods     

Jiří Zahradník  Peter Moczo 《Pure and Applied Geophysics》1996,148(1-2):21-38

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.  相似文献   

Energy balance of simple elastodynamic sources     

Václav Vavryčuk 《Pure and Applied Geophysics》1994,143(4):563-586

Complete relations are derived for energy and energy flux of elastic waves generated by an isotropic and double-couple source in a perfectly elastic, homogeneous, isotropic, and unbounded medium. In the energy balance of elastodynamic sources near-field waves play an essential role, transforming static energy into wave energy, andvice versa. For explosive and dislocation sources, the sources surface radiates a positive wave energy that is partially distributed to the medium transforming into static energy. For implosive and antidislocation sources, the source surface generates elastic waves, but it does not necessarily imply that it also radiates a positive wave energy. The energy transported by waves can originate in gradual transformation of the static-to-wave energy during propagation of waves through a stressed medium.On leave from Geophysical Institute, Czech Academy of Sciences, Boní II/1401, 41 31, Praha 4 Czech Republic  相似文献   

The role of bathymetry and directional wave conditions on observed crescentic bar dynamics     

Rinse L. de Swart  Francesca Ribas  Gonzalo Simarro  Jorge Guillén  Daniel Calvete 《地球表面变化过程与地形》2021,46(15):3252-3270

Nearshore sandbars are important features in the surf zone of many beaches because they strongly influence the mean circulation and evolving morphology. Due to variations in wave conditions, sandbars can experience cross-shore migration and vary in shape from alongshore uniform (shore-parallel) to alongshore rhythmic (crescentic). Sandbar dynamics have been studied extensively, but existing observational studies usually do not quantify the processes leading to crescentic bar formation and straightening. This study analyses the dynamics of crescentic bar events at the fetch-limited beach of Castelldefels (northwestern Mediterranean Sea, Spain) using 7.5 years of hourly time-exposure video images and detailed wave conditions. The results show that, despite the generally calm wave conditions, the sandbars were very dynamic in the cross-shore and longshore directions. They often migrated rapidly offshore during storms (up to 70 m in one day) and more slowly onshore during post-storm conditions. Crescentic bars were often present at the study site (48% of the time), but only when the sandbar was at least 10 m from the shoreline. They displayed a large variability in wavelengths (100–700 m), alongshore migration speeds (0–50 m/day) and cross-shore amplitudes (5–20 m). Wavelengths increased for larger bar–shoreline distances and the alongshore migration speeds were strongly correlated with the alongshore component of the radiation stresses. Crescentic patterns typically developed during low–medium energetic waves with limited obliquity ( $\theta \lesssim 20$° at 10 m depth), while bar straightening occurred during medium–high energetic waves with strong oblique angles of incidence ( $\theta \gtrsim 15$°). Overall, this study provides further proof for the important role of wave direction in crescentic bar dynamics and highlights the strong dependence of crescentic bar development on the initial bathymetric configuration.  相似文献   

Scattering of elastic waves by a fracture zone containing randomly distributed cracks     

Jun Kawahara  Teruo Yamashita 《Pure and Applied Geophysics》1992,139(1):121-144

We theoretically study the scattering ofP, SV andSH waves by a zonal distribution of cracks, which simulates a fault fracture zone. An investigation is conducted how the geometrical properties of the crack distribution and the frictional characteristics of the crack surface are reflected in the attenuation and dispersion of incident waves, as well as in the amplitudes of the transmitted and reflected waves from the zone. If the crack distribution within the fault zone changes temporally during the preparation process of the expected earthquake, it will be important for earthquake prediction to monitor it, utilizing the scattering-induced wave phenomena.We consider the two-dimensional problem. Aligned cracks with the same length are assumed to be randomly distributed in a zone with a finite width, on which elastic waves are assumed to be incident. The distribution of cracks is assumed to be homogeneous and sparse. The crack surface is assumed to be stress-free, or to undergo viscous friction; the latter case simulates fluid-filled cracks. The opening displacement of the crack is assumed to be negligibly small. The idea of the mean wave formalism is employed in the analysis, and Foldy's approximation is assumed.When the crack surface is stress-free, it is commonly observed for every wave mode (P, SV andSH) that the attenuation coefficientQ ^–1 peaks aroundka1, the phase velocity is almost independent ofk in the rangeka<1 and it increases monotonically withk in the rangeka>1, wherek is the intrinsicS wavenumber anda is the half length of the crack. The effect of the friction is to shift the peak ofQ ^–1 and the corner of the phase velocity curve to the low wavenumber range. The high wavenumber asymptote ofQ ^–1 is proportional tok ^–1 independently of model parameters and the wave modes. If the seismological observation thatQ ^–1 ofS waves has a peak at around 0.5 Hz in the earth's crust is combined with our results, the upper limit of crack size within the crust is estimated about 4 km. The information regarding the transmitted and reflected waves, such as the high wavenumber limit of the amplitude of the transmitted wave etc., allows estimation of the strength of the friction.  相似文献   

Using numerical modelling to evaluate tsunami hazard near the Kuril Island     

L. B. Chubarov  Yu. I. Shokin  K. V. Simonov 《Natural Hazards》1992,5(3):293-318

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.  相似文献   

Transmission and reflection of Rayleigh waves at a thin low velocity vertical layer: A laboratory and theoretical study     

P. F. Biagi  T. S. Gegechkory  E. N. Its  P. Manjgaladze  V. Sgrigna  D. Zilpimiani 《Pure and Applied Geophysics》1990,133(2):317-327

A three-dimensional ultrasonic modelling was used to study the Rayleigh waves reflected from a thin low velocity vertical layer and those transmitted through the same zone. The reflection and transmission coefficients of the Rayleigh waves have been calculated by an approximate method based on the Green function technique. Nonrigid contact boundary conditions were used for the low velocity layer modelling. A rather good correspondence between the theoretical and experimental absolute values of the reflection and the transmission coefficients was obtained. Some discrepancies between experimental and theoretical results, in particular with regard to phase shifts, may be explained by a certain inadequacy of the theoretical model to the low velocity layer investigated by the ultrasonic modelling.  相似文献   

弹性波的三维有限元模拟   总被引：5，自引：0，他引：5       下载免费PDF全文

邓玉琼  张之立 《地球物理学报》1990,33(1):44-53

本文讨论了弹性波瞬态传播问题的三维有限元计算方法及当前存在的实际困难.针对要求计算机内存大和计算时间长的问题,采取了改进措施.由于采用了集中质量矩阵和修正的中心差分时间积分显格式相结合的方法,可以使计算机内存和计算时间大为减少;由于采用结点定位法,最适合用于目前发展的并行计算机系统,可使计算速度大大增快;还采用了有效激发震源法,有效激发区是随时间步进的增加而逐步增大,这不仅能节省计算时间,而且使波场的传播过程一目了然,本文计算了由两种介质组成的三维楔形问题,得到若干典型剖面的瞬时波场图及随时间变化的合成地震图.  相似文献   

The sequence of sediment behaviour during wave-induced liquefaction   总被引：4，自引：0，他引：4  

B. MUTLU SUMER  FIGEN HATIPOGLU  JØRGEN FREDSØE  S. KAAN SUMER 《Sedimentology》2006,53(3):611-629

This paper presents the results of an experimental investigation of the complete sequence of sediment behaviour beneath progressive waves. The sediment was silty with d ₅₀ = 0.060 mm. Two kinds of measurements were carried out: pore-water pressure measurements (across the sediment depth), and water-surface elevation measurements. The process of liquefaction/compaction was videotaped from the side simultaneously with the pressure and water-surface elevation measurements. The video records were then analysed to measure: (i) the time development of the mudline, (ii) the time development of liquefaction and compaction fronts in the sediment and (iii) the characteristics of the orbital motion of the liquefied sediment including the motion of the interface between the water body and the sediment. The ranges of the various quantities in the tests were: wave height, H  = 9–17 cm, wave period, T  = 1.6 sec, water depth = 42 cm, and the Shields parameter = 0.34–0.59. The experiments reveal that, with the introduction of waves, excess pore pressure builds up, which is followed by liquefaction during which internal waves are experienced at the interface of the water body and the liquefied sediment, the sequence of processes known from a previous investigation. This sequence of processes is followed by dissipation of the accumulated excess pore pressure and compaction of the sediment which is followed by the formation of bed ripples. The present results regarding the dissipation and compaction appear to be in agreement with recent centrifuge wave-tank experiments. As for the final stage of the sequence of processes (formation of ripples), the ripple steepness (normalized with the angle of repose) for sediment with liquefaction history is found to be the same as that in sediment with no liquefaction history.  相似文献